304 304l 316 316l stainless steel pipe fittings elbows 30

We’ll do our greatest to fulfill your specifications and are sincerely searching ahead to developing mutual helpful small business marriage with you! Since improving the technical grade and quality level of products reflects the value of the company and is also a social responsibility, we will continue to move forward with the essence of the corporate culture of rigorous and realistic, scientific and technological innovation.

It is applicable in various applications like car headers, machinery parts, screws and also food handling equipment. Hot / Cold / Fabricate / Seamless / Welded / Induction

C22 is typically provided in the annealed condition with a minimum yield strength of 45 ksi. However, C22 can be cold worked to higher strength levels.

The difference between 304 and 304L stainless steel is that 304L has a .03 max carbon and is good for welding whereas 304 has a mid range level of carbon.

Inconel Tube Fittings can be easily elongated by 40% and still possess excellent workability. These fittings have a melting point of about 1413 degrees C and have a long service life. The Inconel 600 Buttweld Fittings can be produced by hot or cold rolling processes.

The surfaces of these parts have a mottled appearance due to general corrosion. Additionally, they weaken the alloy and require frequent replacement to prevent catastrophic effects. Because the alloy has good resistance to general corrosion or uniform erosion, from a financial standpoint, the industry can use 304 stainless steel welded fittings without denting their pockets.

MONEL K500 is a age-hardenable Nickel-Copper alloy which combines the corrosion resistance of Alloy 400 with high strength corrosion fatigue and erosion resistance.

The main difference between stainless steel bottle caps and carbon steel bottle caps is the difference in material. The chemicals contained in stainless steel caps will keep the surface of the cap from rusting and corroding for a long time.

Nickel alloy long radius elbows Nickel alloy long radius elbows without drilling holes are called long radius elbows and are used to close the end of the pipe. Long radius elbows are available in threaded or welded form from 150 lbs to 2500 lbs. 200 Nickel Alloy Long Radius Elbow, 201 Nickel Alloy Long Radius Elbow, 20 Nickel Alloy Long Radius Elbow.

316L stainless steel possesses less carbon and molybdenum than typical 316 steel, which gives the two alloys different characteristics.

Stainless steel sanitary fittings are the main components of sanitary process systems. As one of the sanitary solution providers, HT PIPE manufactures and supplies a wide range of sanitary fittings including DIN/SMS/3A/IDF/RTJ/ISO/BS welded fittings, unions, tri-clamps, ferrules, pinch fittings and short tube etc. We have the ability to provide qualified sanitary fittings that meet your high purity conditions and FDA, GMP requirements.

We offer ASTM A815 Duplex Steel S31803/S32205 Pipe Elbow with good elasticity and high resistance to toxicity. Duplex Steel S31803/S32205 Caps Are Better Choice For Common Steel Fittings At High Temperatures And Inhibited Deformation ASME SA815 Duplex Steel DIN 1.4462 Reducers Are Sensitive To Chloride Stress Corrosion Cracking In The Chemical Industry.

ASTM A420 WPL6 are widely utilized in pressure piping and pressure vessel service at low-temperatures.

The heat-affected weld zones have reduced precipitation of carbides and other phases to ensure uniform corrosion resistance.

Alloy 800H is a solution heat treated (2100¡ãF/1150¡ãC), controlled-carbon version of alloy 800 with improved elevated temperature properties. It has improved creep and stress-rupture characteristics in the 1100¡ãF (593¡ãC) to 1800¡ãF (982¡ãC) temperature range.

We are engaged in the manufacture and supply of high quality duplex steel s31803 pipe fittings and duplex steel s32205 pipe fittings. These duplex s31803 seamless pipe fittings and duplex s32205 welded pipe fittings are available in various sizes according to customer requirements.

The corrosion resistance of this alloy alone makes duplex stainless steel pipe fittings a better contender for challenging applications. Industries such as oil and gas and petrochemicals are high pressure environments. These industries need products like ASTM A815 UNS S31803 elbows that are not only standardized but also durable.

Alloy 20 (Alloy 20) is an iron-based austenitic alloy developed to resist sulfuric acid corrosion. It has excellent resistance to sulfuric acid corrosion; it has strong resistance to phosphoric acid, nitric acid and chloride environments, chloride stress corrosion, pitting corrosion and crack corrosion. Therefore, alloy 20 has the name of anti-corrosion alloy; it has a wide range of applications: such as: chemical, food, medicine, power production and plastics industries will use it. For resistance to pitting corrosion and chloride corrosion, stress corrosion cracking problems, etc., alloy 20 is often used.

Stainless Steel 304 Buttweld Fittings are made up of a basic austenitic stainless steel material that has 18% chromium and 8% nickel in its composition.

Inconel 601 has good resistance to stress corrosion cracking. Due to the control of carbon content and grain size, 601 has high creep rupture strength, so it is recommended to use 601 in the field above 500 ¡ãC.

Incoloy 800H is a solution heat treated, carbon controlled version of its parent Alloy 800.

In seamless fitting form it has size ¡°1/2 to 24¡± and in welded form¡±24 to 96¡± and thickness is available in SCH 10,20,30,40,80,100,120,140,160,XXS. It has dimensions like ANSI/ ASME B16.9, B16.28, MSS-SP-43.

Stainless steel 304 fittings are made of 18/8 chrome-nickel alloy steel. The composition of the material contains 18% chromium and 8% nickel. This makes the material stronger, with a minimum yield strength of 215MPa and a minimum tensile strength of 505MPa.

ASTM A234 is Standard Specification for steel pipe fittings includes carbon and alloy steel material for moderate and high temperature services.

Sanitary elbows are also classified by length. A large radius elbow has a curvature radius of 1.5 times the pipe¡¯s diameter, but a short radius elbow has a radius equal to the pipe¡¯s diameter

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

ASTM B366 UNS N08800 N06625 N08020 N04400 N06600 N08904 N08031 180deg ELBOW ASME B16.9 features corrosion resistance, accurate dimensions, withstands high pressure and high temperature loads, rust-resistant finish, smooth transition from flange thickness to pipe and ensures excellent stress distribution.

N04400 Butt Weld Pipe Fittings has resistance to chloride induced stress corrosion cracking. Also referred as WNR 2.4360 Butt Weld Pipe Fittings, it has excellent mechanical properties from sub-zero temperatures up to 1020¡ã F. Alloy 400 Pipe Fittings are available in different types such as Elbow, Bends, Equal & Unequal (reducing) Tees, Equal & Unequal (reducing) Cross, Concentric & Eccentric Reducer, End Pipe Cap, Long & Short Stubends, Seamless Butt weld pipe fittings, Welded Butt weld pipe fittings, and more.
The Monel 400 alloy has many excellent mechanical properties, making it famous in pipe fittings. The Monel 400 Pipe Fittings can give high performance. It is an alloy of nickel and copper, with a small amount of iron, manganese, carbon, and silicon content. The chemical composition of the Alloy 400 Pipe Fittings results in its high strength. Specialized Monel Fittings Manufacturer In India also concentrates on manufacturing high quality of these pipe fittings due to its high demand in various industries- its resistance towards acids and alkalis are the main reason behind that. The Alloy 400 Buttweld Elbow also possesses good ductility, thermal conductivity, and they can only be hardened by cold-working.

Fittings are used to change the direction of the pipe. The easiest way is to bend the pipe. However, it stretches and thins the outer wall of the pipe. It also thickens the inner walls of the pipe. 2205 duplex stainless steel fittings are known for their austenitic and ferritic microstructures. They show the properties of both classes. ASME SA815 Duplex Steel Butt Welded Pipe Fittings show improved localized corrosion resistance compared to Grades 316 and 317.

ASTM A815 GR S32750 tee is used to merge or split fluid streams.