304 310S 316 347 stainless steel seamless pipe connectors elbows

ASTM A403 WP 347 fittings are available in a variety of sizes and configurations. Our product range includes pipe connectors, adapters, reducers, tees, elbows, and they are also available in a variety of thread types. It is designed to provide leak-free connections suitable for a variety of applications supporting today’s major industrial markets.

This product is suitable for the stainless steel pipe system in dairy, food, beer, beverage, pharmaceutical, cosmetics and other industries.

All kinds of pipe products have DIN, ISO, 3A, SMS, BS, IDF, DS, BPE standard. And pipe fitting: 45¡ã/90¡ã/180¡ãbend series, tee/cross series, concentric(eccentric) series make your pipeline system free connectivity. Each series pipe fittings have weld, clamp, thread and flange four common install ways with your pipe system standard connections.

We also accept all orders of CS Elbow A234 WPB up to and including 90 degree to suit your requirements.

Alloy 20 (Alloy 20) is an iron-based austenitic alloy developed to resist sulfuric acid corrosion. It has excellent resistance to sulfuric acid corrosion; it has strong resistance to phosphoric acid, nitric acid and chloride environments, chloride stress corrosion, pitting corrosion and crack corrosion. Therefore, alloy 20 has the name of anti-corrosion alloy; it has a wide range of applications: such as: chemical, food, medicine, power production and plastics industries will use it. For resistance to pitting corrosion and chloride corrosion, stress corrosion cracking problems, etc., alloy 20 is often used.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

These fittings are also resistant to crevice corrosion in chloride environments due to higher molybdenum and nickel content and pitting corrosion. We are one of the suppliers of grade 316 cut-to-length fittings. ASTM A403 Gr WP316 SS Reducer Tee is a variety of pipe fittings to connect 3 pipes of different diameters and can be customized according to customer requirements.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

These A234 WP9 Alloy Steel Reducer are relevant to use in low-pressure product flow services, however, their working pressure can vary depending upon the pipe’s built.This is because of the decreased inclination to accelerate malicious inter-metallic stages in these Alloy Steel WP9 Stub End, subsequently, bearing it more noteworthy flexibility than different alloys amid and following different thermal cycling conditions.

These curved products are used in the dairy, food, pharmaceutical, biotechnology and other industries for condensers, heat exchangers, process lines and product transport. We specialize in sanitary certified 316L stainless steel custom swept elbow production and provide mill test reports, our long radius elbows can provide sweeps up to 180 degrees.

The Inconel 600 Pipe Fittings are made with high concentrations of chromium, nickel, and molybdenum. This composition of chemicals gives it excellent resistance against all forms of corrosion and oxidation.

These fittings are used as matching composition filler materials for welded alloys, forged and cast products. Therefore, re-annealing of cold-worked parts is important for optimum corrosion resistance in Hastelloy C276 butt-welded pipe fittings. To obtain reducing medium in Hastelloy C276 elbow fittings, add 2% (by volume) ethanol or propanol to water.

Inconel 600 alloy is arguably a standard engineering material used in a variety of applications requiring high temperature and corrosion resistance. Inconel 600 fittings have some excellent mechanical properties and are popular for their enhanced strength and high workability. Due to its chemical composition, the material possesses all these excellent properties. It contains high concentrations of various important elements such as chromium, molybdenum and nickel. It also shows good antioxidant properties.

The combination of very low corrosion rates in high-velocity sea water and high strength make alloy K-500 pipe bend and elbow particularly suitable for shafts of centrifugal pumps in marine service.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

The chromium and nickel contents of this alloy provide excellent oxidation resistance at low concentrations of oxidizing and reducing sulfur, good resistance to carburization and sulfidation. The alloy also has reasonable resistance to nitriding in cracked ammonia, but not as much as Inconel 600.

ASTM A234 includes wrought carbon steel and alloy steel fittings of seamless and welded construction covered by the latest revision of ASTM B16.9, B16.11, MSS-SP-79, MSS-SP-83, MSS-SP-95, and MSS-SP-97. etc.

The alloy has been used in a variety of applications. It has excellent resistance to rapidly flowing brackish water or seawater. It is particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated.

ASTM A234 WPB Pipe Fittings belong to a group of pipes and fittings that are intended for moderate to high temperature services with pressure piping. The A234 is the specification for the moderate to high temperature services where the WPB stands for grade B pressure and weldable pipes.

We have been a leading manufacturer and supplier of Duplex 2205 Fittings for the past ten years. Our goal is to produce the best product for everyone at the most reasonable price.

Werkstoff’s number 2.4602, Inconel Alloy 22, VDM Alloy 22 and ATI 22 alloy fall under same UNS number.

These fittings don‘t deform or dissociate easily at high pressures and elevated temperatures. The Alloy 600 Fittings possess superior strength and excellent mechanical properties. They possess a minimum tensile strength of 655Mpa and a minimum yield strength of 310 Mpa.

316 stainless steel pipe bend has excellent corrosion resistance in many environments. It gives good service in atmospheric conditions, resisting most environments and is often used in marine conditions, or where industrial pollution is heavy.

Incoloy 800H Pipe Fittings (UNS N08810) is in fact an iron-nickel-chromium alloy having the same basic composition as Incoloy 800, with significantly higher creep rupture strength.

Stainless steel tees are pipe fittings and pipe joints for branch pipes of the main pipeline. Stainless steel tee is divided into equal diameter and different diameter. The size of the connecting end of the equal-diameter tee is the same, the size of the main pipe of the reducing tee is the same, and the branch pipe is smaller than the main pipe. The stainless steel threaded tee has three internal threads on the port. It is an industrial pipe fitting.

Hastelloy offer very good resistance to strong reducing and moderately oxidizing corrosive acids, as well excellent stress corrosion cracking resistance and resistance to localized attack.

317L stainless steel 180 degree elbow has very high corrosion resistance, but it is getting more and more expensive. The products we offer are known throughout the world for their reliability and quality.

316 stainless steel pipe is the second most common stainless steel after 304. SS DIN 1.4401 / 1.4436 Rectangular Welded Pipe, ASTM A312 TP316 Pipe, 316 Rectangular Pipe, 316 Pipe typically contain 16% Chromium and 10% Nickel with added Molybdenum typically between 2-3%.

Stainless steel 316 butt weld joints are made of chrome-nickel-molybdenum alloy austenitic stainless steel. The material has good corrosion resistance, similar strength to 304 grade steel, and good hardness.

HT PIPE offers a range of precision finished duplex fittings & flanges to ensure a good flow in seamless. Our flanges are corrosion resistant & designed to operate in high pressure environments. Here at HT PIPE we supply a broad range of piping products and materials which are used in many different industries.

Our Incoloy 825 Buttweld Fittings are indispensable to the oil and petroleum industry; these pipes do not support porosity as they are formed through a single metal body and can be trusted for critical transmission casses.