304 310S 316 stainless steel pipe fittings male and female elbows

These pipe fittings of B366 N06601 B366 N08825 B366 N10276 B366 N08020 materials, are used in the chemical industry, as well as in pressure vessels.

Duplex UNS S31803 Tee Fittings have high general corrosion resistance. Duplex UNS S31803 Cross Fittings provide good weldability in thick plates. Duplex UNS S31803 Reducer Fitting is a duplex stainless steel with a 50/50 austenitic, ferritic microstructure.

Duplex 2205 fittings have higher yield strength and good mechanical properties. These fittings are highly resistant to corrosion and stress. The presence of ferritic alloys gives them strength to prevent cracking in sulfide and chloride environments.

Stainless steel is an alloy of iron that is resistant to rusting and corrosion. It contains at least 11% chromium and may contain elements such as carbon, other nonmetals and metals to obtain other desired properties. Stainless steel’s resistance to corrosion results from the chromium, which forms a passive film that can protect the material and self-heal in the presence of oxygen
Completely and infinitely recyclable, stainless steel is the ¡°green material¡± par excellence. In fact, within the construction sector, its actual recovery rate is close to 100%.
Stainless steel is also environmentally neutral and inert, and its longevity ensures it meets the needs of sustainable construction. Furthermore, it does not leach compounds that could modify its composition when in contact with elements like water.
Stainless steel must contain at least 10.5 percent chromium. Depending on the grade, it may contain much higher chromium levels, and additional alloying ingredients like molybdenum, nickel, titanium, aluminum, copper, nitrogen, phosphorous or selenium.
In addition to these environmental benefits, stainless steel is also aesthetically appealing, extremely hygienic, easy to maintain, highly durable and offers a wide variety of aspects. As a result, stainless steel can be found in many everyday objects. It also plays a prominent role in an array of industries, including energy, transportation, building, research, medicine, food and logistics.

A sanitary elbow is a kind of sanitary fitting installed between two lengths of pipe or tubing to allow a change of direction. While these corner fittings are usually a 90¡ã or 45¡ã angle, 22.5¡ã elbows are also available.

In addition to heat resistance, Hastelloy Buttweld Fittings have high resistance to corrosion, pressure and oxidation. Hastelloy pipe fittings also have excellent mechanical properties and are often used in the chemical and aerospace industries.

These elbows can effectively change the flow through 60 degree turns.

These alloy steel wp22 seamless pipe fittings are produced with the aim to provide better performance and fulfill all the requirements of industrial applications.Our A234 WPL22 Street Elbows have both the ends threaded, thus affixing on pipes in the drainage, plumbing, and water piping systems effortlessly.

Also known as 3 way pipe fittings, tee fittings resemble the alphabet ¡®T¡¯, where in two horizontal pipes and one vertical pipe can be attached, to manage the direction and mixture of fluids. Pipe tees are widely used in piping systems to transport two phase fluid mixtures and are mainly of two types ¨C Equal Tee and Unequal Tee (Reducing Tee).

Hastelloy B2 pipe bend resists the formation of grain boundary carbide precipitates in the weld heat-affected zone, making it suitable for most chemical process applications in the as-welded condition.

Monel 400? has low corrosion rate in flowing seawater, therefore it is widely used in marine applications.We make use of the best manufacturing techniques for their production so that the final product being served to the customers is the best of best.

They are corrosion proof and can last longer for their suppliers. They are made of top-grade metals that meet ANSI, DIN, BS, ASME and JIP specifications and are ideal for applications involving excessive stress and temperature. Incoloy UNS N08800 Tee Fittings are ideal for suppliers with excessive temperatures. Utilizing our extensive distribution network, we source and process a wide and varied range of pipe fittings that are synthesized using high-grade metals at our licensed premises. It was developed to business specifications and is ideal for use in numerous business applications. Fittings with precision drilled holes align effortlessly with pipes.

Duplex S31803 stainless steel butt welded pipe fittings are used in desalination, boiler manufacturers and brewing tanks. They are generally lower cost and have a lower percentage of alloying elements. They are suitable for ASTM A 815, A812 and ASME SA 815, SA 812 specifications.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

These industries are rely on MSS SP75 WPHY 52 Welded Pipe Fittings and MSS SP75 WPHY Grade 52 Seamless Pipe Fitting because these fittings can withstand severe corrosion problems in harsh conditions.ASTM A860 WPHY 52 are Created High Yield fittings and are by and large utilized at High-pressure prerequisites.

ASTM A420 WPL6 Pipe Fittings are made up of a carbon steel alloy that is made up of carbon, manganese, phosphorus, sulfur and silicon.

Our company produces nickel alloy forged elbows under the guidance of experienced and skilled experts. They have accumulated a wealth of years of experience and industry knowledge to help us meet production challenges and achieve continuous production of our products, even in batches. For the production of nickel alloy forged elbows, we use nickel alloys as raw materials.

The amount of other elements that may be present in stainless steel is immeasurable compared to carbon steel. The most notable feature of stainless steel is that it is not easy to corrode or rust. Avoiding corrosion is a unique property of steel, as most mild steels are primarily made of iron, which rusts quickly when exposed to conventional oxygen-containing atmospheres.

The ASME SA 234 Gr WPB Pipe Elbow and other fittings can come in different dimensions according to the ASME/ ANSI B16.9 and B16.28 standards.Common use material are ASTM A234 Grade WPB, WPC, WP5, WP9, WP11, WP22 and WP91. It covers the butt-welded pipe fittings of Elbow, Tee, Reducer, Cap and Cross, and some socket welding, threaded pipe fittings.

Super Duplex Stainless Buttweld Pipe Fittings, Super Duplex Steel S32760 Butt weld Pipe Fittings, 2507 Super Duplex Pipe Fittings, Super Duplex UNS S32760 Buttweld Fitting, Super Duplex Elbow Dealer in India, Global Supplier of 2507 Super Duplex Butt weld Pipe Fittings, ANSI B16.9 Super Duplex Steel Reducer.

In these standard Grade WPB is the most common material used for medium and high temperature pipelines. W means weldable, P means pressure, B is grade b, refer to the minimum yield strength.

Stainless steel as a material is used in the production of a wide range of products from pipes to bars and elbows once such product is the Stainless Steel Buttweld Elbow. It consists of a long radius elbow, concentric reducer, and eccentric reducer. They are an important part of the industrial piping system which helps in changing the direction of the pipes.

Steel Pipe Pipe Bends can work under constant pressure due to excellent dexterity and high load-bearing capacity.

Sanitary Weld Elbows are perfect for permanent assembly on processing systems that require a change of fluid direction. These fittings require robust welding for installation that offers high integrity and durability in applications that require longevity and cleaning in place (CIP).

The machinability of 316 pipe bend is about 60% that of AISI B1112 resulphurised free cutting carbon steel. A free machining version of 316 is available as bar.

These A234 WP9 Alloy Steel Reducer are relevant to use in low-pressure product flow services, however, their working pressure can vary depending upon the pipe’s built.This is because of the decreased inclination to accelerate malicious inter-metallic stages in these Alloy Steel WP9 Stub End, subsequently, bearing it more noteworthy flexibility than different alloys amid and following different thermal cycling conditions.

304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel.When it comes to uses, SS304 can be found in kitchen sinks and other appliances such as toasters and microwave ovens. SS304 is also used to make pressure vessels, wheel covers as well as for building facades.

Stainless steel 304 for resistance to corrosion and high temperatures. It has a maximum operating pressure rating of 250 pounds per square inch (psi) at 70 degrees F ambient temperature. This 90-degree unpolished weld elbow with tangent sanitary fitting is suitable for use in food, beverage, and dairy applications.

We warmly welcome our regular and new clients to join us for ASTM Seamless Tee B366 (WP20CB, UNS N08020, Alloy20).

Stainless steel 310 reducers are a mixture of several metals (this is called an alloy), but mostly iron, which is harder and stronger than iron. Stainless Steel 310S Cross Butt Weld Fittings are typically ferrous alloys with a carbon content between 0.02% and 1.7% by weight. Stainless steel 310 bend butt welded pipe fittings with carbon content above this value are called cast iron, in which the carbon is replaced by other alloy materials.