304 316 347 stainless steel pipe fitting 90 degree elbow with 1-2 or 1 inch

Duplex Steel S31803 Reducer Fittings are resistant to chloride environments and sulfide stress corrosion. Meanwhile, these Duplex Steel S31803 Cross Pipe Fittings are also available to our customers in different sizes and shapes. Duplex steel S31803 bent butt welded pipe fittings generally perform well in environments that cause premature failure of austenitic grades. Although duplex steel S31803 short end butt welded pipe fittings have good high temperature oxidation resistance, this grade – like other duplex stainless steels – can embrittle even for short periods of time if held at temperatures above 300 degrees Celsius.

Grade 430 is a ferritic, straight chromium, non-hardenable grade, combining good corrosion resistance and formability characteristics with useful mechanical properties. Its ability to resist nitric acid attack permits its use in specific chemical applications but automotive trim and appliance components represents its largest fields of application.

It is a tee fitting with two outlets at a 90¡ã junction to the main line.

Stainless steel 304 for resistance to corrosion and high temperatures. It has a maximum operating pressure rating of 250 pounds per square inch (psi) at 70 degrees F ambient temperature. This 90-degree unpolished weld elbow with tangent sanitary fitting is suitable for use in food, beverage, and dairy applications.

ASTM A403 WP304H pipe fittings mean the pipe fittings which material is wrought austenitic stainless and grade is ASTM A403 WP304H.The material is additionally utilized all through the control era industry.

These fittings material consist of killed steel, forgings, bars, plates, seamless or HFW (fusion welded) pipe products, with filler metal added.A234 WPB pipe fittings are butt welding ends,commonly used to be welded with the steel pipes of A106,A53,GR.B material,or API 5L GR.B material.

Monel 400 is widely used in Feed water and steam generator tubing.

A versatile alloy, the main reason manufacturers use these stainless steel 304 butt weld joints is their great resistance to general corrosion. Uniform corrosion, or general corrosion, is a common problem in plants where components are exposed to air.

The alloy has been used in a variety of applications. It has excellent resistance to rapidly flowing brackish water or seawater. It is particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated.

Inconel 625 Pipe Fittings are strong and are used in high corrosive applications that need stronger pipes. The material is a nickel chromium molybdenum alloy with niobium in the composition for stabilization. It can operate from cryogenic temperatures up to 1093 degrees Celsius. So the fittings are preferable for applications that require high strength, corrosion resistance and high temperature resistance. The Alloy 625 Buttweld Fittings are used with ease of welding and this is the most used type of fittings. The Inconel UNS N06625 Pipe Elbow is used to turn the pipe away by an angle, usually 45 degrees or 90 degrees. The ANSI B16.9 ASTM B366 625 Inconel Monel Tee can range from ? inches to 48 inches in nominal bore size and it branches a pipe into two.

304 stainless steel elbow is a pipe fitting that connects two pipes with the same or different nominal diameters in the piping system, so that the pipes are bent at a certain angle. According to the angle, the most commonly used are 45¡ã, 90¡ã, 180¡ã. In addition, according to engineering needs, other abnormal angle elbows such as 60¡ã are also included. The connection methods with the pipeline include direct welding (the most common method), flange connection, threaded connection, socket connection, etc.

While our stainless steel 316 elbow fittings have only been produced for many years, stainless steel should theoretically last for centuries with the right choice. What’s particularly exciting about these stainless steel 316 stub ends is that considering some of the same factors that make stainless steel an excellent environmental choice, it can also make it an excellent economical choice, especially when considering the life cycle cost of the project.

Our high quality stub end A-type stub end butt welded joints are tested and proven for durability, accuracy and precision. ANSI B 16.9 Stub End is widely used in plumbing engineering to connect different types of pipes.

Upon exposure to oxidising agents, Inconel 625 is protected naturally by its nickel-chromium matrix.

Our company produces nickel alloy forged elbows under the guidance of experienced and skilled experts. They have accumulated a wealth of years of experience and industry knowledge to help us meet production challenges and achieve continuous production of our products, even in batches. For the production of nickel alloy forged elbows, we use nickel alloys as raw materials.

Stainless Steel 310s Fittings are austenitic steel products specifically designed for applications requiring corrosion resistance at elevated temperatures. Our ASTM SA403 GR.TP 310S fittings contain high levels of chromium and nickel which contribute to its corrosion resistance, superior strength and corrosion resistance.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

UNS S32205 Pipe Fittings are applicable in chemical processing, pulp and paper production, marine and other high chloride environments, Liquor tanks and paper machines, Transport and storage, Oil and gas exploration and processing equipments. Oshwin Overseas has huge inventory of Duplex UNS S31803 Pipe Fittings in different standards and different dimensions, thickness and sizes. Oshwin Overseas are proud 2205 Duplex UNS S32205 Stainless Steel Pipe Fittings Suppliers in following forms and shapes.

Duplex steel butt welded fittings are weldable fittings that can change flow direction, branch, reduce pipe size, or connect additional equipment. It has high mechanical strength and high resistance to stress corrosion cracking. This is also the result of alloying with nitrogen.

Stainless steel grade 316Ti is a titanium stabilized version of alloy 316. This austenitic chromium-nickel stainless steel grade contains substantial addition of molybdenum which is why the Stainless Steel 316Ti Pipe Fittings exhibits several important characteristics. For instance, grade 316Ti show an increase in the corrosion resistance properties along with improved resistance to pitting chloride ion solutions as well as increased tensile strength at elevated temperatures.

ASTM a403 wp304L elbows are installed between two lengths of pipe to allow for a change of direction. Usually available with 90¡ã or 45¡ã elbows, 90¡ã elbows are also known as “90 bends”, “90 ell” or “quarter bends”, and 45¡ã elbows are also known as “45 bends” or “45 ells” Elbows are also classified by length. Long radius elbows have a radius of curvature that is 1.5 times the pipe diameter, while short radius elbows have a radius equal to the pipe diameter. ASTM A403 WP304L is the most versatile and versatile of the stainless steel family alloy, ideal for a variety of commercial and domestic applications.

Stainless Steel A403 WPS31254 contains higher chromium and low carbon content. Lower carbon means less chromium carbide precipitation due to welding. This steel type contains as low as 0.03% of carbon content and thus reduces its susceptibility to intergranular corrosion. This kind of steel can be continuously exposed to temperatures of about 1500 without appreciable scaling.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

ASTM A860 WPHY 52 Fittings are made up of a high yield carbon steel with carbon, manganese, sulfur, phosphorus, silicon, nickel, chromium, molybdenum, copper, titanium, vanadium and cobalt in the composition.The increased durability ensures a long work life, therefore proving that the A860 WPHY 52 elbow is a cost saving solution.

Nickel Alloy 600, also sold under the brand name Inconel 600. It is a unique nickel-chromium alloy that is known for its oxidation resistance at higher temperatures.

C22 has excellent resistance to oxidation, carburization, and sulfidation at elevated temperatures. However, C22 should not be used at temperatures above 1250¡ãF due to the possible formation of embrittling phases.

Hastelloy C-276 has a higher molybdenum content.

Alloy 800H/800HT is frequently used in applications that involve long-term exposure to elevated temperatures where resistance to oxidation, carburization and other types of elevated temperature corrosion is required.