304-316 90 deg. food grade stainless steel pipe fitting sanitary elbows

At the same time, depending on the heat treatment of these stainless steel 304 cross pipe fittings, we may do solution treatment, annealing treatment, or aging treatment according to the needs of our esteemed customers. And depending on the surface finish of these stainless steel 304L reducer fittings, we can offer them in black finish, polished to glossy, peeled to glossy, or roughed to glossy.

Type 317L is a molybdenum-containing austenitic stainless steel designed to provide better corrosion resistance than Type 316L in highly corrosive process environments, especially those containing chlorides or other halides. The low carbon content allows 317L to be welded without intergranular corrosion due to chromium carbide precipitation at grain boundaries. Type 317L is non-magnetic in the annealed state, but can be made slightly magnetic by soldering.

Inconel 600 fittings are made from a nickel-chromium alloy that contains a minimum of 72% nickel and 14% chromium in a composition with carbon, manganese, silicon, sulfur, copper and iron.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Super duplex 2507 / UNS S32750 pipe fittings have great resistive properties to chloride stress corrosion cracking and a high thermal conductivity with a low coefficient of thermal expansion. These pipe fittings have a great resistance to inorganic acids used in dilute hydrochloric acid.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

These elbows provide good service in harsh environments. The elbow is used to change the flow direction of the medium by 30 degrees.

It is commonly referred to by the tradename Hastelloy C22 and the universal designation UNS N06022. C22 has excellent corrosion and oxidation resistance, great mechanical properties over a wide range of temperatures, and good fabrication properties.

This exotic alloy is used in oil and gas exploration and is also used in the chemical processing industry. Most of the processing equipment uses Duplex 2205, which is also used in industrial storage and transportation units. Pulp and paper digesters, liquid tanks and paper machines also use Duplex 2205. It is ideal for use in marine environments.

Stainless steel 316L elbows are used to divert pipes or turn them in another direction. It provides high creep and excellent fracture stress resistance at higher temperatures. They are said to be ideal for manufacturing or forming applications.

The sheer variety of pipe bend sizes and materials also make them suitable for routing everything from hot or caustic liquids to maintaining pressure and movement in high viscosity liquids or those with suspended solids, such as Oil Sands slurry lines which contains a high concentration of silica sand.

Butt weld fittings connect with pipe to deliver air, water, natural gas, and oil in plumbing applications and food and dairy processing. Butt weld (BW) fittings form pipe joints with strength, fatigue, corrosion resistance, and temperature compliance.

These fittings are also resistant to crevice corrosion in chloride environments due to higher molybdenum and nickel content and pitting corrosion. We are one of the suppliers of grade 316 cut-to-length fittings. ASTM A403 Gr WP316 SS Reducer Tee is a variety of pipe fittings to connect 3 pipes of different diameters and can be customized according to customer requirements.

Alloy 20 (Alloy 20) is an iron-based austenitic alloy developed to resist sulfuric acid corrosion. It has excellent resistance to sulfuric acid corrosion; it has strong resistance to phosphoric acid, nitric acid and chloride environments, chloride stress corrosion, pitting corrosion and crack corrosion. Therefore, alloy 20 has the name of anti-corrosion alloy; it has a wide range of applications: such as: chemical, food, medicine, power production and plastics industries will use it. For resistance to pitting corrosion and chloride corrosion, stress corrosion cracking problems, etc., alloy 20 is often used.

Monel 400 is made up of nickel and copper along with trace elements comprising of iron, manganese, carbon, and silicon. Monel 400 Fittings has excellent resistance against acids and alkalis thereby, being extremely corrosion resistant.

Duplex steel UNS s31803 pipe fittings are mass produced and widely used duplex steels. This grade of steel can withstand stress corrosion cracking due to contact with sulfur. UNS S31803 elbow grade is inherently economical and reliable as it provides longer service life. Duplex steel UNS S31803 fittings are easy to weld and will not expand at high temperature and stress levels.

This modification was to control carbon (.05-.10%) and grain size to optimize stress rupture properties. Incoloy 800HT has further modifications to the combined titanium and aluminum levels (.85-1.20%) to ensure optimum high temperature properties.

Our fittings are supplied and manufactured according to ASTM STD, all materials are standardized at the proper temperature to maintain their strength, and are always NACE compliant. SPI manufactures carbon steel pipe fittings and stocks them for urgent needs of our customers.

ASTM A403 WP316 Elbows are used to reduce pipe size from larger to smaller sizes. Reducers are one of the most commonly used fittings, as the complexity of large pipes often requires size reduction.

There is a complete solid solution between nickel and copper. The wide solubility range between iron, chromium and nickel enables many alloy combinations. There are many different stainless steel grades in this category with their unique properties and performance in different conditions and environments.

ASME B366 Incoloy 800 Elbow resists water corrosion at moderate temperatures.

Our products, such as Duplex Steel S31803 Butt Welded Pipe Fittings, are custom made to our esteemed customers’ requirements and manufactured with precision. We believe in timely delivery without compromise.

When you need to decide on a metal, the first deal breaker is determining whether it can perform with some corrosive media, such as brine or processing chemicals. If so, you will need a less reactive metal. It’s probably best to choose stainless steel tubing, but double-check the properties of the materials you’ll be using to see if they’ll react.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Stainless Steel 316H Butt Weld Fittings may be susceptible to chloride stress corrosion cracking, where post-weld heat treatment is generally not required. Stainless Steel 316H Butt Weld Pipe Fittings may also be used as an alternative to 316 for heavy section welding.

HT PIPE is one of the leading manufacturers of different types of high-quality products, such as pipe fittings of different shapes, sizes, thicknesses, etc. On the other hand, we are also a major supplier and exporter of the popular product duplex steel UNS S31803 pipe fittings. Pipe fittings are manufactured to all national and international standards of our organization. There are many kinds of pipe fittings, which are widely used in piping systems for various purposes. They are both used to mount profiled pipes to each other. In this way, liquids, fluids, gases, etc. pass through the pipes without any leakage. Also, fittings come in many sizes, sizes, standards, alloys, grades, etc., but most importantly our Duplex 1.4462 fittings are the most demanded fittings on the market today and for many years.

Inconel 600 alloy is arguably a standard engineering material used in a variety of applications requiring high temperature and corrosion resistance. Inconel 600 fittings have some excellent mechanical properties and are popular for their enhanced strength and high workability. Due to its chemical composition, the material possesses all these excellent properties. It contains high concentrations of various important elements such as chromium, molybdenum and nickel. It also shows good antioxidant properties.

In addition to the properties of 304, 316 stainless steel long and short tube ends have increased corrosion resistance due to the addition of molybdenum to their composition. There are duplex steel short end flanges and fittings.

UNS S32750 ( F53 / 1.4410 / Alloy 2507) has a lower coefficient of thermal expansion and higher thermal conductivity than austenitic steel, and is suitable for operating temperatures up to 300 ℃.

Modern processing systems are often a complex network of turns, elevation changes, fittings, and more.