304 316 stainless steel double press connects four pass cross pipe fittings

For industrial purposes, in pipeline systems, we usually need to change the direction of transmission; regulate the flow of fluids (oil and gas, water, mud); open or close pipelines, etc. Therefore, to accomplish these activities, steel pipe fittings will be applied.

In the piping system, stainless steel 304 elbow is a pipe fitting that changes the direction of the pipeline. The chemical composition contained in the stainless steel elbow will keep the surface of the elbow free from rust and corrosion for a long time. According to the angle, the most commonly used are 45¡ã and 90¡ã180¡ã. In addition, according to engineering needs, other abnormal angle elbows such as 60¡ã are also included.

Pipe caps are used to connect pipes of different diameters and are widely used in various chemical, construction industries, paper, cement and shipyards.

Alloy 600 is not an age hardening alloy; cold working is the only hardening method available.

Monel 400 contains the same levels of nickel and copper as the natural nickel ore found.

Our range of Nickel Alloy Fittings, Nickel Alloy Fasteners, High Strength Fasteners includes Butt Weld Fittings, Socket Weld Fittings, Threaded Fittings, Flanges, Fasteners, Outlets, Pipes and Bars. The company successfully engages in supplying industrial accessories and hardware products in a variety of sizes, shapes and sizes to meet customer requirements.

The 316 stainless steel receptacle is an integrally reinforced branch connector that is more secure and reliable than other traditional branch connectors. Easy to use, good performance, durable and other advantages, well received by customers.

ASTM A182 F5 belongs to the American standard Martensite type heat-resistant steel forgings, implementation standard: ASTM A182-2016

Usually, these applications are pressure systems, and it is seen in many instances, the ASTM A105 Threaded Fittings add value to said application.

The working pressure of nickel alloy fittings will vary with the size and construction of the pipe, the type and number of clamps used, the location of the clamps, the correct installation of the clamps, the temperature and the product being conveyed. Fittings are available in the widest range of wall thicknesses and materials in the industry.

Typical applications of Inconel 800 include the food and beverage industry, in addition to being used for heat treatment components.

Steel tee is a T-shaped pipe fittings that has three branches, normally has two forms with Equal Tee and Reducing Tee (Tee reducer), both are used to divide (combine) the pipelines to adjust the flow rate and change the direction.

For the pipe fittings of small size, such as tee, tee and elbow of socket welding and thread, the shape is relatively complex, so the die forging process should be used.

Little or no corrosion occurs in dry gases such as chlorine or hydrogen chloride at room temperature and high temperature. At temperatures up to 550C in these media, this alloy has proven to be one of the most corrosion resistant common alloys.

These ASTM A182 Alloy Steel pipe fittings are manufactured from high quality raw materials, so the manufactured products are of high quality. Additionally, these ASTM A182 Alloy Steel pipe fittings are manufactured with the necessary standards, codes and guidelines in mind, resulting in a high quality product.

Hastelloy C276 has a low carbon content to minimize grain boundary carbide precipitation during welding to maintain corrosion resistance in the heat affected zone of the welded joint

Bushings are similar to thin tubes most commonly used in machinery with rotating or sliding shafts to increase efficiency and reduce vibration and noise. Bushings can be used for drilling operations in drill stands, hydraulic external gear pumps and motors.

Alloy steel is divided into two categories: high-alloy steel and low-alloy steel. Low alloy steel forged fittings, on the other hand, contain about 0.05 ¨C 0.25% carbon and up to 2.0% manganese.

ASTM A105 carbon steel can be forged at temperatures in the range of 2200 to 1700 F followed by quenching and tempering or normalizing.

Nickel alloy is a component that contains nickel as a principal element and in higher concentration. It is a solid material that offers wide solubility with iron, chromium, and copper as well. The alloy is present in combined form as well. Nickel alloy is highly versatile and able to sustain heat and corrosion resistance.

Hastelloy C276 bushings are widely used in the harshest environments such as chemical processing, pollution control, pulp and paper, industrial and municipal waste treatment, and recovery of sour natural gas.

In the manufacturing industry, the production is done by obviously using the best possible quality of crude materials and alloys. It thus tends to offer various good attributes.

90 degree elbow with female National Pipe Taper (NPT) threads for changing the direction of flow between two pipes. Our high quality standard Class 150 stainless steel threaded fittings are manufactured to the highest standards.

Alloy 400 exhibits corrosion resistance to many reducing media.

A182-F11 has good process performance and welding performance, and high durable strength at 500 ~ 550¡æ.

Stainless Steel 316 is a molybdenum austenitic alloy that is highly resistant to corrosive and chloride environments. Typically, this grade of stainless steel is used in exhaust manifolds, heat exchangers, jet engines and many other applications.

This nickel alloy has good corrosion resistance, good wear resistance and high strength.

The emphasis of this alloy is placed on the fact that it is more resistant to aggressive forms of corrosion. In particular, Incoloy 800 shows very high resistance to corrosive compounds seen in aqueous environments.

Under alternating oxidizing and reducing conditions, alloys may suffer from selective oxidation.

SS 316H Forged Tee is a short pipe with a transverse connection at right angles to the pipe. Mostly used to connect multiple pipes to one pipe with two outlets. Usually, they contain an entry. The SS 316 Forged Cross is used to combine or distribute flow by connecting pipes at cross joints and splitting the flow from each pipe.

These alloys possess superior ductility and excellent formability.