304 316 stainless steel sanitary tri clamp pipe fitting

For industrial purposes, in pipeline systems, we usually need to change the direction of transmission; regulate the flow of fluids (oil and gas, water, mud); open or close pipelines, etc. Therefore, to accomplish these activities, steel pipe fittings will be applied.

Due to its high strength and stiffness properties, Inconel 800 is an alloy that is ideal for demanding applications including the marine engineering, aerospace, and chemical processing industries.

The solution annealing treatment is required prior age hardening / precipitation hardening. The single phase microstructure created during solution annealing is required prior to age hardening, such that only the precipitates formed during age hardening will be present in the final product. The composition, size, and quantities of those precipitates formed during aging will determine the final product’s hardness, strength, and mechanical properties after aging. It is critical that the structure be properly solution treated prior to aging in order to meet all of these requirements.

Steel pipe fittings are made of carbon or alloy steel pipes, sheets, profiles, and have a shape that allows them to function (change the direction or rate of fluid) in a piping system. These accessories mainly include steel elbows (45 or 90 degree bends), tees, reducers (concentric or eccentric reducers), crosses, caps, pipe joints, flanges, gaskets, studs, etc.

A fitting or adapter is used in pipe systems to connect straight sections of pipe or tube, adapt to different sizes or shapes, and for other purposes such as regulating (or measuring) fluid flow.[1] These fittings are used in plumbing to manipulate the conveyance of water, gas, or liquid waste in domestic or commercial environments, within a system of pipes or tubes.

A105 Forged Steel Fittings can be ordered to meet the customer requirements by getting them customised according to the instructed dimension . The ASTM A105 Fittings Dimensions are also available as per industry standards such as MSS, ASME and API specification. The A105 Forged Fittings specification are has a limit of up to 10,000 lbs.

ASTM A182 refers to low-alloy steel forgings. It belongs to carbon steel.

ASME B16.11 Threadolet is the most popular branch connection: the branch is made by welding the item to the outlet of the run pipe. The ends of a Threadolet are bevelled to facilitate the welding process, and for this reason. Threadolet belongs to the family of butt weld fittings.

Stainless steel tee fittings are tee fittings. It has two 90¡ã angled outlets and one inlet. These fittings may have threads on the ends. These accessories are used in several industries such as oil refining, water treatment and other treatment units. Tee fittings are available in different sizes and shapes, including straight tees, equal tees, reducing tees, Y tees, transverse tees, male and female branch tees, and male and female tees.

Threaded joints are the oldest method of connecting piping systems. Mainly used for small pipe diameters, generally for pipes with a nominal diameter of NPS 2 or less.

Usually, these applications are pressure systems, and it is seen in many instances, the ASTM A105 Threaded Fittings add value to said application.

These fittings are available in different types such as elbows,couplings,tees crosses,plugs,pipe nipples etc.

ASTM 182 is used for pressure systems, including fittings, flanges,and similar parts that conform to specified dimensions or dimensional standards such as ASME codes.

A182-F11 has high thermal strength (¦Äb¡Ý440MPa) and oxidation resistance at high temperature, and has certain resistance to hydrogen corrosion.

Cu-Ni forged threaded fittings are usually supplied as redrawn tubes in the annealed condition. The combination of good ductility and strength provides excellent formability. In addition to this, these forged fittings are also resistant to rust, oxidation, pitting, stress cracking and crack stress.

Our high quality standard pattern 150 lb rated stainless steel threaded pipe fittings are manufactured to the highest standards. All stainless steel pipe fittings are monitored by quality control personnel for strict compliance with applicable standards & specifications.

Half Coupling is used for small bore branching from a vessel or large bore pipe. It can be threaded or socket type. It has a socket or thread end on only one side.

These Nickel 201 Ferrule Fittings are an improvement over Nickel 200 to control carbon and prevent it from embrittlement due to intergranular deposits in many processes at temperatures between 600¡ãF and 1400¡ãF. Our Nickel 201 double ferrule fittings also have a high Curie temperature and good magnetostrictive properties. These annealed alloy 201 pipe fittings have low hardness and good ductility and ductility.

Inconel 800 forms a thick yet stable oxide layer. This thick layer is known to protect the outer surface of the Inconel 800 component from further attack.

Solution treatment is the most common heat treatment method after stainless steel casting process. The carbide phase is completely or substantially dissolved after the austenitic stainless steel is heated to about 1100 ¡ãC .

Hence, materials with low carbon content such as ASTM A105 Fittings are not recommended to be used in those applications which have the need to be constantly exposed to a range temperatures above this value.

Solution heat treatment and annealing are common methods for heat treatment of non-ferrous metals. In my last article, I looked at the heat treatment process for ferrous metals like steel. Today you will learn about the following heat treatment processes, including solution heat treatment and annealing. You will also learn about precipitation hardening, nitriding, cold working, decarburization.

SS 316 forged pipe fittings are used to bend flow and connect two pipes to each other at different angles. They must be designed in such a way that they do not cause cavitation and excessive pressure loss.

ASTM A105 fittings possess a minimum tensile strength of 485mpa with a minimum yield strength of 250mpa. These fitting can be elongated by 22% and possess a hardness of 137 to 187 HBW. Our company is an ASTM A105 Forged Fittings manufacturer in India who make use of top-of-the-line technology to produce the best components in the industry. These coupling can be half or fully coupled. The Full Coupling A105 is employed in connecting small bore pipes. It is utilized in connecting a pipe to another pipe or to a swage or nipple. A105 Half Coupling is utilized for smaller bore branching from a large pipe bore. These couplings can be threaded and welded. A105 Threaded Coupling is preferred in applications where stress on the system is less. We are exporter and manufacturer of Carbon Steel A105 grade for forged pipe fittings.

Stainless steel 304 is a type of stainless steel that is resistant to corrosion and rusting. Stainless Steel 304 Forged Fittings are used for connecting two pipes or tubes together and can be made from a variety of metals, including copper, brass, aluminum, or stainless steel.

Little or no corrosion occurs in dry gases such as chlorine or hydrogen chloride at room temperature and high temperature. At temperatures up to 550C in these media, this alloy has proven to be one of the most corrosion resistant common alloys.

Stainless elbows are curved connecting pieces that join straight lengths of pipe, commonly at a 90¡ã or 45¡ã angle, allowing obstructions to be avoided in plumbing, ventilation, welding, and automotive applications.

Equal cross, generally for the professional term, four for pipe fittings, pipe connectors, used in the main pipeline to branch pipe.

The inclusion of chromium in combination with nickel in its chemistry makes it resilient to chemical and environmental corrosion.

Nickel alloys are combinations of nickel and a variety of other metals that make strong, oxidation-resistant products with an average lifespan of 25 to 35 years. Monel 400 is a nickel-copper alloy containing approximately 67% nickel and 23% copper.

Carbon Steel A105 Grade all products like flanges, butt weld fittings, forged fittings, outlets, round bar that is Fabricated From High Quality Raw Materials. Carbon Steel A105 products are available in Following Specification, Grade and Sizes.