304 316l 310S stainless steel pipe fittings welded eccentric elbows

ASTM A234 WPB Elbow is a standard specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel suitable for for Moderate and High Temperature Service.

S31803 is the Unified Numbering System (UNS) designation for the original duplex stainless steel. The UNS system was created by multiple trade groups in the 1970s to reduce confusion when the same alloy was called different things, and vice versa. Each metal is represented by a letter followed by five numbers, where the letter represents the metal series, i.e. S for stainless steel.

For paper mill applications requiring lower alloy grades that do not have sufficient corrosion resistance. Based on a 22% chromium content, they have a combined austenitic:ferritic microstructure that provides greater strength, corrosion resistance and cost-effectiveness.

The UNS S31803 (ASTM F51) specification has been largely superseded by UNS S32205 (1.4462, ASTM F60). This reflects their desire to maximize the alloy’s corrosion properties, thanks to the development of the AOD steelmaking process, which allows for tighter control of composition. In addition, it allows to influence the nitrogen addition level rather than just being present as a background element. Therefore, the highest performing duplex grades seek to maximize the content of chromium (Cr), molybdenum (Mo) and nitrogen (N).

321 stainless steel, also known as UNS S32100 and Grade 321, is primarily comprised of 17% to 19% chromium, 12% nickel, .25% to 1% silicon, 2% maximum manganese, traces of phosphorus and sulfur, 5 x (c + n) .70% titanium, with the balance being iron. With regards to corrosion resistance, 321 Stainless Steel is equivalent to Grade 304 in the annealed condition and is superior if the application involves service in the 797¡ã to 1652¡ã F range. 321 Stainless Steel combines high strength, resistance to scaling and phase stability with resistance to subsequent aqueous corrosion.
UNS S32100 Reducing Tee is preferred due to its ability to work in high pressure and temperature even at a higher temperature.
Stainless Steel 321 / 321H Pipe Fittings are used in filtration, refrigeration, oil, gas, petrochemical and in offshore oil drilling industries. The material has chromium, nickel, titanium and other elements along with carbon. The 321H has higher carbon than the other versions. There are different types of fittings such as the 321/321H Stainless Steel Buttweld Fittings which are most commonly used but there are also the seamless fittings. The Stainless Steel UNS S32100 Pipe Elbow is a fitting type that is used in high temperature applications to change direction of flow.

The melting of titanium can only occur in a chemically inert atmosphere such as a vacuum.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Being a two ¨C phase material (austenitic ¨C ferritic) stainless Steel BW Pipe Fittings will present a different tool wear profile from that of single ¨C phase steels of type 304L.

We are also a supplier and exporter of tees such as ASME A182 Duplex Steel S31803/S32205, which crosses the word with hydrogen sulfide, the leading culprit in causing sulfide corrosion cracking in sour service. We have the widest stock of Duplex ASTM A815 Fittings such as Duplex S31803 Tee, Duplex S32205 Stub End, S32205 Double End Cap, Duplex 2205 Reducer, Duplex Cross, Duplex steel S31803 elbow, etc.

According to ASME Boiler and Pressure Vessel Code, ASTM A420 WPL6 is not permitted for use in the construction of power boiler.

Stainless steel 304 fittings are made of 18/8 chrome-nickel alloy steel. The composition of the material contains 18% chromium and 8% nickel. This makes the material stronger, with a minimum yield strength of 215MPa and a minimum tensile strength of 505MPa.

The fittings can also come with different types of surface treatments such as the rust-proof black oil or hot galvanized and transparent oil treated.The raw material for making ASTM A234 fittings hall be fully killed, consisting of forgings, bars, plates, sheet, and seamless or fusion-welded pipe products with filler metal added and shall conform to the chemical requirements of Table 1.

S31803 is the Unified Numbering System (UNS) designation for the original duplex stainless steel. The UNS system was created by multiple trade groups in the 1970s to reduce confusion when the same alloy was called different things, and vice versa. Each metal is represented by a letter followed by five numbers, where the letter represents the metal series, i.e. S for stainless steel.

For paper mill applications requiring lower alloy grades that do not have sufficient corrosion resistance. Based on a 22% chromium content, they have a combined austenitic:ferritic microstructure that provides greater strength, corrosion resistance and cost-effectiveness.

The UNS S31803 (ASTM F51) specification has been largely superseded by UNS S32205 (1.4462, ASTM F60). This reflects their desire to maximize the alloy’s corrosion properties, thanks to the development of the AOD steelmaking process, which allows for tighter control of composition. In addition, it allows to influence the nitrogen addition level rather than just being present as a background element. Therefore, the highest performing duplex grades seek to maximize the content of chromium (Cr), molybdenum (Mo) and nitrogen (N).

Monel 400 is made up of nickel and copper along with trace elements comprising of iron, manganese, carbon, and silicon. Monel 400 Fittings has excellent resistance against acids and alkalis thereby, being extremely corrosion resistant.

Hastelloy C22 pipe fittings is a combination of versatile austenitic nickel, chromium, molybdenum, and tungsten alloy. This alloy enhances the resistance to corrosion, petting, and oxidations.

They are corrosion proof and can last longer for their suppliers. They are made of top-grade metals that meet ANSI, DIN, BS, ASME and JIP specifications and are ideal for applications involving excessive stress and temperature. Incoloy UNS N08800 Tee Fittings are ideal for suppliers with excessive temperatures. Utilizing our extensive distribution network, we source and process a wide and varied range of pipe fittings that are synthesized using high-grade metals at our licensed premises. It was developed to business specifications and is ideal for use in numerous business applications. Fittings with precision drilled holes align effortlessly with pipes.

We also offer Super Duplex S32760 Butt Weld Fittings and Super Duplex S32750 Fittings according to customer specific requirements. We also offer various shapes such as Super Duplex S32760 Stub Ends, Super Duplex S32750 Coupling Reducers, Super Duplex S32760 Elbows, Super Duplex S32750 Tube End Caps, S32760 Super Duplex Three links, etc.

The Carbon Steel A234 WPB Smls Reducer is a seamless product that reduces the diameter of the pipeline.Unless specified for carbon steel plates or sheet, the steel may be made to either coarse grain or fine grain practice. Which ASTM A234 WP9 shall be made to fine grain practice.

Pipe Fittings are available in various forms like Elbow Fittings, Return Bend Fittings, Cross Pipe Fittings, Cap Pipe Fittings, Tee Pipe Fittings, Stub End Pipe Fittings, Reducer Pipe Fittings, and Coupling Pipe Fittings. Each of these forms has their own role to play as pipe fittings but with common intent of enhancing the pipe utility in various conditions.

Titanium’s thermodynamic properties do not allow it to melt in normal conditions, because it becomes more reactive at elevated temperatures and can catch fire if the oxygen molecules are present in its environment.

We also accept all orders of CS Elbow A234 WPB up to and including 90 degree to suit your requirements.

The alloy has been used in a variety of applications. It has excellent resistance to rapidly flowing brackish water or seawater. It is particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated.

This combination makes the material resistant to corrosion and high temperatures up to 889 degrees Celsius. 304 stainless steel butt weld fittings meet standard ASTM A403 and are available in outside diameters from ?” to 48″. For seamless fittings, diameters range from ? to 10 inches.

ASTM A403 WP304H has a high carbon content in chemical compositions.ASTM A403 WP304H normally is used for the pressure piping systems of moderate and high temperature services. WP304H is a kind of heat and corrosion resistant steel.It has a good pipe bending,welding performance,heat and corrosion resistance,high rupture strength and stability,also the cold deformation ability is very good.It could be used up to 650¡ãC,oxidation temperature up to 850¡ãC.

It has high creep-rupture strength. The following datasheet gives an overview of Incoloy 800HT.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

The manufacturing processes for pipe fittings includes forging and shaping operations. As well as pressing, hammering, piercing, extruding, upsetting, rolling, bending, fusion welding and machining. Or the processes of combination of two or more of these operations.

The Monel 400 alloy has many excellent mechanical properties, making it famous in pipe fittings. The Monel 400 Pipe Fittings can give high performance. It is an alloy of nickel and copper, with a small amount of iron, manganese, carbon, and silicon content.

UNS S31803 fittings are composed of duplex stainless steel with equal amounts of austenitic and ferritic microstructures. UNS S31803 fittings are two-phase, ferritic, austenitic, 22% chromium, 3% molybdenum, 5 to 6% nickel alloy stainless steel.

Fittings are used to change the direction of the pipe. The easiest way is to bend the pipe. However, it stretches and thins the outer wall of the pipe. It also thickens the inner walls of the pipe. 2205 duplex stainless steel fittings are known for their austenitic and ferritic microstructures. They show the properties of both classes. ASME SA815 Duplex Steel Butt Welded Pipe Fittings show improved localized corrosion resistance compared to Grades 316 and 317.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

They are used in different applications with different purposes. ASTM A403 WP316 Elbow is used to change the direction of the pipe. When the elbow is made of 316 steel, it can be used in chloride-rich marine applications. Elbows can have different lengths and angles.