304 316l sanitary ts certificate stainless steel pipe fittings long custom logo china elbows fitting tube equal all flange elbows

Hastelloy C276 is one of the few grades resistant to wet chloride gas and chlorine dioxide.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Compared to austenitic stainless steel alloy 304, UNS S31600, commonly referred to as marine grade stainless steel, has better mechanical properties and corrosion resistance. Similar to Alloy 304, 316 stainless steel fittings belong to the family of austenitic stainless steels. Although it is known as a chromium-nickel stainless steel alloy, this molybdenum-containing alloy grade imparts good pitting resistance to fittings compared to common stainless and carbon or alloy steel grades.

The presence of this sigma phase in UNS S31803 dual-phase steel elbows is detrimental to the alloy because, in addition to the corrosion resistance of the material, it greatly reduces properties such as impact resistance at room temperature.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

ASTM A420 WPL6 Pipe Fittings are made up of a carbon steel alloy that is made up of carbon, manganese, phosphorus, sulfur and silicon.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Our stainless steel UNS S31600 reducer price list is very competitive with market prices. Reducers are used to reduce the diameter of pipes. There are eccentric reducers and concentric reducers.

We offer tees like ANSI B16.9 alloy UNS N08020 with good machinability and can be painted with different finishes to enhance their surface quality as required. ASTM B366 Alloy DIN 2.4660 Welded Fittings Eliminate Corrosion in Chemical, Shipbuilding, Food and Beverages. We are also an exporter of ASTM SB366 Alloy 20 Seamless Pipe Fittings for non-corrosive use in oil rigs.

This nickel-copper alloy is precipitation hardenable due to the addition of aluminum and titanium. It combines the corrosion resistance of Monel 400 with the added benefits of superior strength and hardness (derived from its age-hardenability). Monel K-500 is also known for its ease of fabrication compared to other superalloys, and the fact that it is essentially nonmagnetic even at low temperatures.

HastelloyC-276 (Hastelloy) is a tungsten-nickel-chromium-molybdenum alloy with extremely low silicon-carbon content and is considered to be an all-around corrosion-resistant aluminum alloy. The key moisture-resistant chlorine, various air-oxidizing fluorides, isopropyl titanate solutions, hydrochloric acid and air-oxidizing salts, have good corrosion resistance in ultra-low temperature and standing temperature sulfuric acid. Therefore, in the past 30 years, it has been widely used in extremely corrosive natural environments such as chemical plants, petrochemicals, flue gas desulfurization, pulp and paper industry, and environmental protection.

Corrosion resistance

The aluminum alloy has the following characteristics: 1. It has good corrosion resistance to most corrosive substances under the two conditions of air oxidation and repair. ¢ÚIt has good resistance to pitting corrosion, void corrosion and intergranular corrosion. The higher content of Mo and Cr makes the aluminum alloy resistant to corrosion by chloride ion content, and the W element further improves the corrosion resistance. At the same time, Hastelloy C-276 aluminum alloy is one of the only types of raw materials that are resistant to wet chlorine, hypochlorite and chlorine dioxide saturated solutions. Ester solution has obvious corrosion resistance. It is one of the very few raw materials that can be used as a hot sulfuric acid saturated solution.

304L stainless steel construction. It is composed of chromium-nickel material and has very good corrosion resistance. Couplings are suitable for unthreaded pipes in air, water, oil and gas applications.

We manufacture UNS S31803 double pipe fittings with a wealth of benefits. Some benefits are its high mechanical strength and high resistance to corrosion stress cracking. These duplex butt welded fittings are lightweight and therefore ductile;

253 MA Pipe Fittings are austenitic stainless steel nickel-chromium alloyed fitting adding with unusual earth metals and nitrogen. The fittings have superior oxidation resistance up to 1150 degree C and general corrosion resistance. It offers outstanding creep strength along with superior resistance to erosion and sulfidation at elevated temperature. Through the tight control of micro-alloy addition these demonstrate superior heat resistance properties. The fittings have superior ductility and maintain its good formability. The presence of nitrogen and chromium content possess resistance to pitting and stress corrosion cracking.

316L has a lower proportion of carbon in its composition.

Butt weld fittings connect with pipe to deliver air, water, natural gas, and oil in plumbing applications and food and dairy processing. Butt weld (BW) fittings form pipe joints with strength, fatigue, corrosion resistance, and temperature compliance.

The standards are ASME B16.9 and B16.28 and the schedules range from sch5s to XXS.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Monel K500 pipe bend and elbow are exceptionally good dimensional stability.

ASTM A234 Alloy Steel WP12 Pipe Fittings, which is a low-carbon plain chromium Ferritic stainless steel. Along with this, these ASTM A234 Alloy Steel WP12 Butt Weld Fittings are widely used for fabrication work and are available at industry leading prices.

UNS N10665 or W.Nr. 2.4617, Hastelloy B2 (also known as “Alloy B2”), is a solid solution reinforced Ni Mori with low additions of carbon, silicon and iron. It can be used to reduce chemical environment and chemical processing industry. However, Hastelloy B2 should not be used in temperatures from 1000¡ãF to 1600¡ãF and should not be used in oxidizing media.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

The corrosion resistance of Monel alloy K-500 is subtantially equivalent to that of alloy 400 except that, when in the age-hardened condition, alloy K-500 has a greater tendency toward stress-corrosion cracking in some environments.

We are a manufacturer, supplier and distributor of premium quality Nickel Alloy Forged Elbow. Our primary purpose in providing this product is to understand and meet our customers’ operational requirements. We have supplied these products to large industrial sectors for many years and have earned the trust and satisfaction of our valued customers.

Inconel 600 butt welded pipe fittings have excellent mechanical and physical properties. They have high strength and enhanced solderability over a wide temperature range. They show good resistance in different types of corrosive media and the fittings are non-magnetic in nature.

When standard 90-degree elbows won¡¯t work with your system design or space requirements, bent pipes and tubing are an excellent routing option.

Inconel 600 butt welded fittings are also resistant to stress-related corrosion cracking in chloride environments. They are effective against alkaline environments. Inconel 601 fittings also exhibit all of these properties, but due to the addition of aluminum to their chemical composition, they exhibit improved mechanical performance even in extremely hot environments.

It also has mechanical chambers suitable for various environments and extended temperatures. Resistant to chloride pressure corrosion cracking. Select it regularly to clear up pressure corrosion cracking problems. It is good at resisting the corrosion of warm sulfuric acid.

ANSI B16.9, ANSI B16.28, MSS SP-43, or MSS SP-79 Super Duplex 2507 Butt weld Pipe Fitting, Super Duplex Steel ASTM A815 Fittings, Werkstoff No 1.4410 Super Duplex Buttweld Pipe Fittings, Manufacturer Of ASTM A815 Super Duplex Steel UNS S32750 Buttweld Fittings in China.