304 4 inch steel pipe fittings 3 way tee best tee

The alloy has great mechanical properties at subzero temperatures.For catering to the needs of our customers better, it is essential that we manufacture Monel Pipe Fittings in different types, with each one serving some specific purpose.

The alloy also has excellent mechanical properties and presents the desirable combination of high strength and good workability.

Grade 310S Stainless Steel Butt Weld Pipe Fitting contains low Carbon, with higher Nickel and Chromium content curbing Hydrogen sulphide attack, which used in various industries like heat exchangers, furnace parts, shipbuilding, heat treatment baskets, condensers, offshore etc.
The fittings are shaped up and then heated to a high temperature following a rapid cooling closer to the cooling in still air. This rapid cooling adds to the strength of the Stainless Steel 310 Pipe Fittings and makes them much stronger. The SS 310S Fitting is used in industries like the sea water processing, thermal energy generation plants and much domestic piping as well. 310S SS Weld Fittings is used in different pressure classes to cope up with the pressure containment requirement of the application as well.

An important feature of Incoloy UNS N08800 Elbow is that it not only exhibits good mechanical properties at ambient temperature conditions, but also performs well at high temperature settings up to 1000¡ãF.

Incoloy 825 alloy is a nickel-iron-chromium alloy that combines molybdenum, copper and titanium for excellent resistance to many corrosive environments. Incoloy 825 is very corrosion resistant. It has a high nickel content, sufficient to resist chloride ion stress corrosion cracking, and a very stable austenitic configuration.

316 Fittings cover the standard for wrought austenitic stainless steel fittings for pressure piping applications. The material of pipe fittings shall include forgings, bars, plates or seamless or welded pipes.

These pipes work efficiently under reducing and oxidizing conditions in acid and can be used as structural materials for gas desulfurization units. The higher nitrogen content ensures excellent corrosion resistance.

Our high quality standard grade 150 lb 304 316 stainless steel threaded fittings are manufactured to the highest standards. All stainless steel pipe fittings are monitored by quality control personnel for strict adherence to applicable standards and codes. These stainless steel fittings are ideal for applications involving potentially corrosive chemicals or liquids. In addition to being resistant to corrosion, stainless steel pipe fittings also prevent contamination, making them useful for many professionals.

Our stainless steel 310S butt weld fittings are said to be the most commonly used and easiest to use, offering more forms and finishes than any other grade in the stainless steel range. Since it is the low carbon form of the alloy, these SS 310 butt welded pipe fittings are used to simplify production.

A standard AMS 5666 or UNS N06625 variant of Inconel 625 may contain 58% nickel, 22% chromium, and 3.5% niobium.

The cast stainless steel pipe fittings such as 304 or 3016l are available in several different types for use in different applications such as threaded, flared, without flare and flange adapters. They provide a safe and leak-proof seal for refineries, chemical processing units, power supply units, and different processing lines. They are suitable for high-pressure applications as well as high temperatures, for instance, nuclear industry and petrochemical, etc.

In fact, the above properties of 317L fittings are considered to be much better than traditionally used stainless grades such as 304, 304L, 316 and 316L. The alloys used for stainless steel 317L are known to provide better resistance than 316L, especially in highly corrosive environments, which may contain chemicals such as sulfur-containing media, chlorides and other halides.

The corrosion resistance of Monel alloy K-500 is subtantially equivalent to that of alloy 400 except that, when in the age-hardened condition, alloy K-500 has a greater tendency toward stress-corrosion cracking in some environments.

Alloy 400 is virtually immune to chloride ion stress corrosion cracking in typical environments.

Both AISI 04 stainless steel and 304L stainless steel provide a general purpose stainless steel with good resistance to atmospheric corrosion, to many organic and inorganic chemicals and to food and beverages.

Duplex Steel 2101 Butt Weld Pipe Fittings, which is the most widely used duplex (ferritic & austenitic) stainless steel grade made at par with the international quality standards making use of high-grade steel.?Duplex?Steel 2101 Pipe Fittings?are extremely corrosion resistant and work hardenable alloys.?Duplex Steel 2101 Buttweld Fitting?are almost never used above 300 Degree C.

Duplex Steel UNS S31803 / S32205 Butt Welded Pipe Fittings, we make sure to provide you with a product that meets the required quality standards and has a longer service life. Our ASTM A815 Duplex Steel S31803/S32205 Elbows limit localized corrosion types and are essential for applications requiring a compact yet flexible seal.

Monel 400 is a nickel-copper alloy (about 67% Ni ¨C 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions.?Butt-weld and forged fittings are available.Excellent corrosion resistance in many acidic and alkaline environments Especially suitable for reducing conditions. Good ductility and thermal conductivity Ideal for seawater applications.

Duplex Steel S31803 Front Ferrule Fittings are used in commercial and aerospace applications and can be freely formed and have best-in-class weldability. Given that the dual-phase steel S32205 rear ferrule joint is only about one-third the weight of comparable steel parts, it is the clear choice when weight is an aspect.

Alloy 20 is also known as UNS N08020 which is a stainless steel grade containing high alloy with excellent resistance to stress corrosion and sulfuric acid. This alloy grade contains various elements like copper, nickel; chromium and molybdenum that together help in offering crevice corrosion, resistance to corrosion and pitting.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

This nickel alloy is attacked in sulfur-bearing gases above approximately 700¡ã F and molten sulfur attacks the alloy at temperatures over approximately 500¡ã F.

Monel K500 pipe bend and elbow have corrosion resistance in an extensive range of marine and chemical environments. From pure water to non-oxidising mineral acids, salts and alkalis.

C22 has excellent resistance to chloride-induced localized corrosion, including pitting, crevice corrosion, and stress corrosion cracking.

1.4529 German numeral code. Is a super duplex stainless steel, the main components: 20Cr-25Ni-6Mo-1Cu-0.2N corresponding to the United States: N08926, 254SMo…
1.4529 (UNS N08926) has very high resistance to pitting and crevice corrosion in halide media and in acidic environments containing sulfur and hydrogen
It can effectively resist chloride ion stress corrosion, and also has good corrosion resistance and good stability in oxidizing and reducing media.
The mechanical properties are slightly better than 904L, and it can be used in the manufacture of pressure vessels from -196 to 400 ¡ãC.

904L Pipe Fittings is stainless steel is a non-stabilized austenitic stainless steel with low carbon content. This high alloy stainless steel is added with copper to improve its resistance to strong reducing acids, such as sulphuric acid. The steel is also resistant to stress corrosion cracking and crevice corrosion. Grade 904L is non-magnetic, and offers excellent formability, toughness and weldability.

Stainless steel fittings are made of corrosion-resistant 304 stainless steel for durability and dependability. Suitable for diverse industrial applications such as vibration, high pressure or corrosive conditions.

As the most pipe bending methods are quite cost-efficient, using bent pipes and tubes will have a minimal impact on the overall design budget when using the ideal length and sizing for your application.

Type 316 alloy is considered suitable for some marine environment applications, such as ship rails and hardware, and the exterior walls of buildings near the ocean that are exposed to salt spray. Type 316 stainless steel shows no evidence of corrosion in the 100-hour, 5% salt spray (ASTM-B-117) test.