304 astm b16.9 stainless steel pipe fittings 30 degree elbow

This kind of steel can be continuously exposed to temperatures of about 1500¡ãF without appreciable scaling.Schedules :Sch.40 to Sch.XXs

When choosing pipe fittings, material is always a big part of the choice. Stainless steel offers excellent protection against corrosion and rust, something which could prove hugely troublesome within water and gas pipes. Brass and copper pipes wouldn’t have the same resistance to these kinds of issues.

The versatility of INCONEL alloy 600 has led to its use in a variety of applications involving temperatures from cryogenic to above 2000¡ãF (1095¡ãC).

The source raw material for ASTM A234 WPB steel pipe fittings may come from steel pipes such as ASTM A106 Gr.B and C. Also from steel plates like ASTM A285 Gr.C, ASTM A516 Gr 70, ASTM A572 etc.

This 316L Stainless Steel 90 Degree Weld Elbow is a common connection pipe fitting used in plumbing installation. It is used for connecting the bend of pipe and changing the direction of pipe. Since the 90 degree weld elbow has good strength and resistance to corrosion, it has long service life and low maintenance cost.

The Monel 400 alloy has many excellent mechanical properties, making it famous in pipe fittings. The Monel 400 Pipe Fittings can give high performance. It is an alloy of nickel and copper, with a small amount of iron, manganese, carbon, and silicon content.

Stainless Steel Duplex 2205 is the most widely used duplex (ferritic/austenitic) stainless steel grade. It finds applications due to both excellent corrosion resistance and high strength. Duplex 2205 is a nitrogen enhanced stainless steel that was developed to combat common corrosion problems encountered with the 300 series stainless steels.

Inconel 718 elbows are commonly used in gas turbine engine parts, wellhead completions and blowout preventers (BOPs).

Monel 400 is a nickel-copper alloy (about 67% Ni ¨C 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions.?Butt-weld and forged fittings are available.Excellent corrosion resistance in many acidic and alkaline environments Especially suitable for reducing conditions. Good ductility and thermal conductivity Ideal for seawater applications.

Alloys 800, 800H and 800HT are nickel-iron-chromium alloys with good strength and excellent resistance to oxidation and carburization at high temperature exposure.

Its glossy off-white appearance also makes it useful for metal coating or display.

These alloy steel wp22 seamless pipe fittings are produced with the aim to provide better performance and fulfill all the requirements of industrial applications.Our A234 WPL22 Street Elbows have both the ends threaded, thus affixing on pipes in the drainage, plumbing, and water piping systems effortlessly.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

The alloy is used in many fields, especially marine and chemical processing.

The microstructure of duplex stainless steels is split approximately 50:50 between austenite and ferrite, and the balance of these phases provides the following benefits: Higher strength, approximately twice that of Type 304 austenitic stainless steel . This results in a reduction in the thickness of the plates used in fabrication, resulting in reduced weight, which is of particular importance in structural applications such as pressure vessels, storage tanks and bridges, as well as good weldability of thick plates, good low temperature toughness, stress resistance Corrosion cracking is important in many applications including hot water tanks, processing plants, brewing tanks and desalination plants.

Duplex Steel S31803 Reducer Fittings are resistant to chloride environments and sulfide stress corrosion. Meanwhile, these Duplex Steel S31803 Cross Pipe Fittings are also available to our customers in different sizes and shapes. Duplex steel S31803 bent butt welded pipe fittings generally perform well in environments that cause premature failure of austenitic grades. Although duplex steel S31803 short end butt welded pipe fittings have good high temperature oxidation resistance, this grade – like other duplex stainless steels – can embrittle even for short periods of time if held at temperatures above 300 degrees Celsius.

High creep strength is attained through control over crystal grains¡ªvia high temperature heat treatment, together with fine control over carbon, titanium, and aluminum content.

Alloy X pipe bend is known for its excellent high temperature strength withstanding up to 2200¡ãF. The alloy can also be easily fabricated with forming and welding characteristics by both manual and automatic methods.

Alloy 20 Industrial Fitting, Werkstoff No 2.4660 Alloy Butt Weld Tee, ANSI B16.28 Alloy 20 Cross, MSS SP-43/SP-79 Alloy 20 Stub End
ASME SB366M Alloy 20 Pipe Cap, ASME/ANSI B16.9 Alloy 20 Reducer, Alloy 20 ASTM B366 Welded Fitting, China B366 Alloy 20 Seamless Fitting Price

Monel 400 is a nickel-copper alloy (about 67% Ni ¨C 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions.?Butt-weld and forged fittings are available.Excellent corrosion resistance in many acidic and alkaline environments Especially suitable for reducing conditions. Good ductility and thermal conductivity Ideal for seawater applications.

Adding a small amount of Mg to Monel K-500 alloy can increase the grain boundary bonding force and improve high temperature plasticity.

1.4529 German numeral code. Is a super duplex stainless steel, the main components: 20Cr-25Ni-6Mo-1Cu-0.2N corresponding to the United States: N08926, 254SMo…
1.4529 (UNS N08926) has very high resistance to pitting and crevice corrosion in halide media and in acidic environments containing sulfur and hydrogen
It can effectively resist chloride ion stress corrosion, and also has good corrosion resistance and good stability in oxidizing and reducing media.
The mechanical properties are slightly better than 904L, and it can be used in the manufacture of pressure vessels from -196 to 400 ¡ãC.

Cuni 70/30 elbows have superior strength to withstand higher speeds in seawater.

These Hastelloy fittings are available in a variety of styles such as Hastelloy end caps, short ends, fittings, equal tees, unequal tees, concentric reducers, eccentric reducers, collars, Long radius elbows, short radius elbows, return elbows, elbows and joints, etc.

ASTM a403 wp304 Elbow is an industrial fitting that changes the direction of a pipe. This connection allows conventional threaded pipe to be rearranged for turns or installation in limited spaces without the need to purchase a pipe bender.

The carbon steel seamless pipe fittings, buttwelded fitting and fabricated ones are available in the market.

304 and 304L are austenitic alloys, which means that iron carbide or a non-magnetic solid solution of carbon in iron is used to impart corrosion resistance to this stainless steel. We manufacture stainless steel 304/304L forged fittings in socket weld and threaded forms as well as stainless steel 304/304L elbows in standard and non-standard sizes with bend radii from 1D to 10D. We offer stock delivery of Stainless Steel 304/ 304L Fittings, Stainless Steel 304/ 304L Flanges and Stainless Steel 304/ 304L Bends in a variety of standard sizes and types.

The ASME SA 234 Gr WPB Pipe Elbow and other fittings can come in different dimensions according to the ASME/ ANSI B16.9 and B16.28 standards.Common use material are ASTM A234 Grade WPB, WPC, WP5, WP9, WP11, WP22 and WP91. It covers the butt-welded pipe fittings of Elbow, Tee, Reducer, Cap and Cross, and some socket welding, threaded pipe fittings.

We offer a wide range of stainless steel 904l buttweld fittings such as ANSI B16.9 Stainless Steel 904L Buttweld Elbow, 904L Stainless Steel Buttweld Reducer, Stainless Steel UNS N08904 Buttweld Fittings, Stainless Steel 904L Buttweld Tees, B366 Stainless Steel 904L Long Radius Bend Pipe Fittings, 904L Stainless Steel Buttweld 90 deg Elbow, Stainless Steel DIN 1.4539 Pipe Fittings, 904L Stainless Steel Buttweld End Pipe Cap. etc. These stainless steel 904l buttweld fittings are available in various sizes, shapes as per the requirements of our clients.

A403 316L Stainless Steel covers the standard for wrought austenitic stainless steel fittings for pressure piping applications.Compared to grade 316, the pitting resistance properties of ASME B16.9 SS 316L Fitting is much higher.