304 astm b16.9 stainless steel pipe fittings tee

317L is non-magnetic in the annealed condition but may become slightly magnetic as a result of welding.Fittings supplied under this specification shall be examined visually for surface discontinuities, surface checks, and mechanical marks.

L2S 90 degree elbows are 304 or 316L stainless steel with a polished finish (No. 7) featuring a butt weld x butt weld connection. This 90 degree elbow is used to change flow direction in many applications for the semiconductor, cosmetics, food, dairy and beverage industries.

ASTM A403 Gr WP316 standard are ideal for pressure piping applications. It defines all the seamless and welded pipe fittings made with 316 grade stainless steel.

Inconel 625 is a non-magnetic nickel-based alloy. Known for its high strength and toughness, high corrosion and oxidation resistance, and excellent fatigue strength, Inconel 625? also offers a very wide operating temperature range, from cryogenics to 2,000¡ãF (1,093¡ãC).

The austenitic structure of 316 stainless steel pipe bend gives excellent toughness, even at cryogenic temperatures.

The alloy has been used in a variety of applications. It has excellent resistance to rapidly flowing brackish water or seawater. It is particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

ASTM a403 wp304 pipe bend is done to under control conditions to avoid carburization, decarburization and scaling surface. Heat treatment methods are stress relieving, hardening and annealing which strength the ductility and corrosion resistance properties.

C276 Elbow has excellent corrosion resistance to a wide range of concentrated hot acids and reducing environments and can be easily used in hot sulfuric and hydrochloric applications.

Hastelloy C-276 is available in the form of plate, sheet, strip, billet, bar, wire, covered electrodes, pipe, tubing, pipe fittings, flanges, fittings.

Duplex UNS S32205 alloy is equally ferritic and austenitic in nature, and hence a widely used grade of Stainless Steel. UNS S32205 consist of 22% Cr and 3% Mo, 5 to 6% Ni alloyed stainless steel.

ASTM A403 WP317L covers the standard for wrought austenitic stainless steel fittings for pressure piping applications.
R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom

They are generally used to attach (or join) two or more pipes (or tubes) together using pipe fittings. They help to make the joint stronger by adding additional strength to the joint, thereby helping to maintain the position of joint with increased stability. Pipe Fittings helps to change the direction of pipe/tube and ensures smooth flow of the content within. Pipe Fittings are also known as Buttweld Fittings.

316L Pipe Fittings the low carbon version of 316 and is immune from sensitisation (grain boundary carbide precipitation). Thus it is extensively used in heavy gauge welded components (over about 6mm). There is commonly no appreciable price difference between 316 and 316L stainless steel.

These Stainless Steel 316L Pipe Fittings have high tensile strength, smooth internal finish, solidity and it is precisely designed. We also offer competitive range of Steel 316L pipe fittings like Stainless 316l tee, Steel 316l pipe reducer, steel 316l elbow, ss 316l butt weld fitting stub end and stainless steel 316l pipe caps in client¡¯s requirement.

A pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction
or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Monel K500 pipe bend and elbow are resistant to a sour-gas environment

The seamless fitting is made up of seamless pipe and is available in 12 inches. Whereas the welded SS Equal tee is made up of welded pipe and is available in the size range of ? inches to 72 inches. The welded buttweld fittings are economical when compared to the welded ones. The Stainless steel concentric reducer is used to connect pipe sections or tube sections on the same axis and is usually used when there is a shift in diameter.

All SA234 WPB Elbow are manufactured in India and produced from strictly European sourced raw material. All ASTM A234 Elbow & Elbow A234 Wpc are manufactured from plate, pressed in two halves with two weld seams.

ASTM A403 WP347H ismainly used where corrosion resistance and sustained operations at temperatures between 800¡ã F. and 1600¡ã F. is of the utmost importance. It is also a superior grade for use on heavy welded objects, which cannot be re-annealed.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Alloy 32750 is a super duplex stainless steel supplied in hot worked and solution annealed conditions. As a super duplex stainless steel, it combines the desirable aspects of austenitic and ferritic steels. Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature over 50¡ãC.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

An important feature of Incoloy UNS N08800 Elbow is that it not only exhibits good mechanical properties at ambient temperature conditions, but also performs well at high temperature settings up to 1000¡ãF.

Incoloy 825 alloy is a nickel-iron-chromium alloy that combines molybdenum, copper and titanium for excellent resistance to many corrosive environments. Incoloy 825 is very corrosion resistant. It has a high nickel content, sufficient to resist chloride ion stress corrosion cracking, and a very stable austenitic configuration.

HT PIPE is a leading supplier of Alloy 800 and other high-quality special metal alloys with decades of experience and extensive specifications.

We can manufacture and supply high quality carbon steel pipe elbows with bending radius ranging from R=3D-10D and bending angle from 10 degrees to 180 degrees. In addition, we can also manufacture carbon steel elbows according to the customized requirements of our esteemed customers. All our carbon steel fittings and flanges are supplied with relevant raw material and finished product test certificates. Carbon steel pipe elbows with bend radii of 3D, 5D and 7D are most commonly used in various industries. Our main elbow products include – high quality carbon steel long radius pigging elbows, seamless long radius pigging elbows and welded long radius pigging elbows.

Large selection of finished and semi-finished stainless steel caps/end caps, crosses, elbows, reducers, tees, stub ends and many other stainless steel butt weld fittings for use in power plants, oil and gas, water treatment, food processing , petrochemical, LNG industry, automotive, heavy engineering, offshore and chemical. We can supply butt welded pipe fittings individually or in conjunction with our other plumbing products.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Monel K500 alloy has the same corrosion resistance as Monel 400 alloy.

800H, AT (Incoloy 800) is an austenitic heat resistant alloy designed for high temperature structural applications.