304 or 316 stainless steel construction pipe fittings S30400 90 deg. elbows

HT PIPE is a leading supplier of Alloy 800 and other high-quality special metal alloys with decades of experience and extensive specifications.

These A234 WP9 Alloy Steel Reducer are relevant to use in low-pressure product flow services, however, their working pressure can vary depending upon the pipe’s built.This is because of the decreased inclination to accelerate malicious inter-metallic stages in these Alloy Steel WP9 Stub End, subsequently, bearing it more noteworthy flexibility than different alloys amid and following different thermal cycling conditions.

Upon exposure to oxidising agents, Inconel 625 is protected naturally by its nickel-chromium matrix.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Hastelloy C276 is one of the few grades resistant to wet chloride gas and chlorine dioxide.

An important feature of Incoloy UNS N08800 Elbow is that it not only exhibits good mechanical properties at ambient temperature conditions, but also performs well at high temperature settings up to 1000¡ãF.

Incoloy 825 alloy is a nickel-iron-chromium alloy that combines molybdenum, copper and titanium for excellent resistance to many corrosive environments. Incoloy 825 is very corrosion resistant. It has a high nickel content, sufficient to resist chloride ion stress corrosion cracking, and a very stable austenitic configuration.

These A234 WPB B16.9 Elbows are used in pipe system construction. We are manufacturing ASTM A234 WPB Elbow from pipes using “mandrel” method which allows the pipe to expand and bend simultaneously.

A pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction
or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

A high nickel alloy with the addition of substantial amounts of copper to give the alloy excellent resistance to sodium chloride solutions, including brine and seawater. Therefore, UNS N04400 Alloy 400 Forged Fittings and Socket Weld Elbows can be used as part of an offshore piping system that may require a change of direction.

Adding a small amount of Mg to Monel K-500 alloy can increase the grain boundary bonding force and improve high temperature plasticity.

Type 304 stainless steel is a T 300 Series Stainless Steel austenitic. It has a minimum of 18% chromium and 8% nickel, combined with a maximum of 0.08% carbon. It is defined as a Chromium-Nickel austenitic alloy.304 stainless steel is used for a variety of household and industrial applications such as food handling and processing equipment, screws,[3] machinery parts, utensils, and exhaust manifolds. 304 stainless steel is also used in the architectural field for exterior accents such as water and fire features. It is also a common coil material for vaporizers.

S32205 is a duplex stainless steel with twice the strength of austenitic stainless steel. Duplex stainless steel composed of 21% chromium, 2.5% molybdenum and 4.5% nickel-nitrogen alloy. It has high strength, good impact toughness and good overall and local stress corrosion resistance. The yield strength of duplex stainless steels is twice that of austenitic stainless steels, a feature that allows designers to reduce weight when designing products, making this alloy more affordable than 316, 317L. This alloy is particularly suitable for use in the -50¡ãF/+600¡ãF temperature range. For applications outside this temperature range, this alloy can also be considered, but there are some limitations, especially when applied to welded structures. Duplex stainless steel has twice the compressive strength compared to austenitic stainless steel, and designers can reduce its weight compared to 316L and 317L. Alloy 2205 is particularly suitable for use in the -50¡ãF/+600¡ãF temperature range, and can also be used at lower temperatures under severe restrictions (especially for welded structures).

Our ASME SA403M SS 304 caps are highly demanded by the printing and textile industries for their versatility and excellent solderability.

ASTM A234 includes wrought carbon steel and alloy steel fittings of seamless and welded construction covered by the latest revision of ASTM B16.9, B16.11, MSS-SP-79, MSS-SP-83, MSS-SP-95, and MSS-SP-97. etc.

Pipe or tube is bent using a combination of dies and other various components working in a rotary action.

Duplex 2507 possesses excellent mechanical properties. Often a light gauge of 2507 material can be used to achieve the same design strength of a thicker nickel alloy. The resulting savings in weight can dramatically reduce the overall cost of fabrication.

Type : Seamless / Welded.This steel type contains as low as 0.03% of carbon content and thus reduces its susceptibility to intergranular corrosion.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Incoloy 800 is an alloy with a higher content of iron. Due to the alloy having a higher content of ferrous, and lower content of nickel, the cost of Inconel 800 becomes low.

Chrome-Molybdenum ASTM A234 WPB Reducer Elbow for the petrochemical, nuclear, gas and oil industries, Norsok Ed4, BP, Saudi Aramco, SABIC, and Shell approved, producing ASTM A234 WPB alloy steel butt welding pipe fittings.

ASTM A815 specification covers two general classes, WP and CR, of wrought ferritic, ferritic/austenitic, and martensitic stainless steel fittings of seamless and welded construction. Class WP fittings are subdivided into four subclasses: Classes WP-S, WP-W, WP-WX, and WP-WU. The material for fittings shall consist of forgings, bars, plates, or seamless or welded tubular products.
Teel Industry has grown in the past few decades and there are a variety of products available in the market. ASTM A815 UNS S32750 Pipe Fittings are one of those products and are available in various sizes, shapes, and dimensions. ASTM A815 UNS S32760 Pipe Fittings are designed to be resistant to corrosion and are said to have perfect weldability. These Super Duplex S32750 Buttweld Fittings are resistant to erosion corrosion and fatigue. They have a mixed microstructure of 50% austenitic and 50% ferrite.

ASTM A420 WPL6 Pipe Fittings are one kind of butt welding pipe fittings,they are commonly produced from the steel pipes of ASTM A333 Grade 6.

Made of stainless steel 304/304L, this fitting is low in carbon to minimize harmful carbide precipitation during welding and ensure corrosion resistance. Elbow meets 304 steel strength standard and 304L extra low carbon standard for quality assurance. Fittings are components used in many different industries to connect, terminate, control flow and change the direction of pipes.

Incoloy 800H is a high carbon grade of these 800 alloys. These alloys exhibit excellent resistance to post-weld carburization and graining. They remain ductile for extended periods of time at temperatures below 700 degrees Celsius.

It is more resistant to general corrosion and pitting than conventional nickel chromium stainless steels such as 302-304.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Stainless Steel 304 Fitting Elbow is an austenitic chromium alloy with a steel composition of 18% chromium and 8% nickel. Stainless steel 304 pipe fittings have high ductility, excellent forming, spinning and drawing properties.

Stainless steel is an alloy of iron that is resistant to rusting. It contains at least 11% chromium and may contain elements such as carbon, other nonmetals and metals to obtain other desired properties. Stainless steel’s resistance to corrosion results from the chromium, which forms a passive film that can protect the material and self-heal in the presence of oxygen.
A stainless steel pipe system is the product of choice for carrying corrosive or sanitary fluids, slurries and gases, particularly where high pressures, high temperatures or corrosive environments are involved. As a result of the aesthetic properties of stainless steel, pipe is often use in architectural applications.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.