304 or 316 stainless steel pipe fittings 30 degree elbows

What makes this material a cost-effective alternative is that the nickel content that manufacturers use to produce dual-phase steel butt-welded pipe fittings is lower than that of super-duplex steel. While the reduction in nickel content gives the metal lower mechanical properties, the higher molybdenum and chromium content almost makes up for the lack of nickel in duplex stainless steel fittings.

The nickel content makes the alloys highly resistant to both chloride stress-corrosion cracking and to embrittlement from precipitation of sigma phase.

A equal tee is the most common pipe fitting. It is used to either combine or split a fluid flow. It is a type of pipe fitting which is T-shaped having two outlets, at 90¡ã to the connection to the main line. It is a short piece of pipe with a lateral outlet. A tee is used for connecting pipes of different diameters or for changing the direction of pipe runs. They are made of various materials and available in various sizes and finishes. They are extensively used in pipeline networks to transport two-phase fluid mixtures.

A stainless steel butt weld cap is a type of pipe fitting that covers the end of a pipe. Since it can have female threads, it can screw on to the male end of the pipe. It can also be welded on to close the end of the pipe. On a weld, if it is a temporary close, or the contractor wants to add to the piping system in the future, he or she should allow additional pipe before closing so the pipe cap can be cut off and the pipe system extended as needed. This way you will not have less pipe than you need and the new fitting can be attached correctly.
A Stainless Steel Butt Weld Cap is used to seal the end of a pipe or a particular butt weld fitting branch or orifice. Typically butt weld pipe caps are used at the end of a piping system or if maintenance is required the pipe cap can blind or isolate the rest of the system to keep it running while maintenance or repairs are performed.

Inconel 625 elbow works well even in extreme temperatures under high stress.

Grade 310S Stainless Steel Butt Weld Pipe Fitting contains low Carbon, with higher Nickel and Chromium content curbing Hydrogen sulphide attack, which used in various industries like heat exchangers, furnace parts, shipbuilding, heat treatment baskets, condensers, offshore etc.
The fittings are shaped up and then heated to a high temperature following a rapid cooling closer to the cooling in still air. This rapid cooling adds to the strength of the Stainless Steel 310 Pipe Fittings and makes them much stronger. The SS 310S Fitting is used in industries like the sea water processing, thermal energy generation plants and much domestic piping as well. 310S SS Weld Fittings is used in different pressure classes to cope up with the pressure containment requirement of the application as well.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Nickel 800H reducing butt welded pipe fittings are also used in heat exchangers, dampers, pressure vessels, etc. Our Alloy 800HT Elbow Butt Weld Fittings can also be used in industrial furnaces and heat treating equipment.

Stainless steel threaded pipe cap is a kind of stainless steel threaded pipe fittings, cast from high-quality 304/316 stainless steel. Threaded pipe caps cover pipe ends, stop fluid flow and protect pipe threads.

Monel 400 is a nickel-copper alloy (about 67% Ni ¨C 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions.?Butt-weld and forged fittings are available.Excellent corrosion resistance in many acidic and alkaline environments Especially suitable for reducing conditions. Good ductility and thermal conductivity Ideal for seawater applications.

Duplex steel pipe fittings are the profession of repairing or installing pipes or piping systems that carry liquids, gases and occasionally solid materials. It is a ferritic-austenitic microstructure with a phase balance of approximately 50% ferrite and 50% austenite.

317L offers higher creep, stress-to-rupture, and tensile strength at elevated temperatures than conventional stainless steels. It is a low carbon grade which provides resistance to sensitization during welding and other thermal processes.

Inconel 600 fittings are made from a nickel-chromium alloy that contains a minimum of 72% nickel and 14% chromium in a composition with carbon, manganese, silicon, sulfur, copper and iron.

304 covers the standard for wrought austenitic stainless steel pipe fittings for pressure piping applications. The material of pipe fittings shall include forgings, bars, plates or seamless or welded pipes. Forging or forming operations shall be performed by hammering, pressing, piercing, extruding, upsetting, rolling, bending, fusion welding, machining, or a combination of two or more of these operations. All accessories should be heat treated.

S31803 is the Unified Numbering System (UNS) designation for the original duplex stainless steel. The UNS system was created by multiple trade groups in the 1970s to reduce confusion when the same alloy was called different things, and vice versa. Each metal is represented by a letter followed by five numbers, where the letter represents the metal series, i.e. S for stainless steel.

For paper mill applications requiring lower alloy grades that do not have sufficient corrosion resistance. Based on a 22% chromium content, they have a combined austenitic:ferritic microstructure that provides greater strength, corrosion resistance and cost-effectiveness.

The UNS S31803 (ASTM F51) specification has been largely superseded by UNS S32205 (1.4462, ASTM F60). This reflects their desire to maximize the alloy’s corrosion properties, thanks to the development of the AOD steelmaking process, which allows for tighter control of composition. In addition, it allows to influence the nitrogen addition level rather than just being present as a background element. Therefore, the highest performing duplex grades seek to maximize the content of chromium (Cr), molybdenum (Mo) and nitrogen (N).

An important feature of Incoloy UNS N08800 Elbow is that it not only exhibits good mechanical properties at ambient temperature conditions, but also performs well at high temperature settings up to 1000¡ãF.

Incoloy 825 alloy is a nickel-iron-chromium alloy that combines molybdenum, copper and titanium for excellent resistance to many corrosive environments. Incoloy 825 is very corrosion resistant. It has a high nickel content, sufficient to resist chloride ion stress corrosion cracking, and a very stable austenitic configuration.

Duplex steel UNS S32205 butt welded pipe fittings are available in a variety of styles such as elbows, elbows, equal and unequal (reducing) tees, equal and reducing (reducing) crosses, concentric and eccentric Reducers, end caps, long and short pipes, seamless butt welded pipe fittings, welded butt welded pipe fittings, etc. Also known as WNR 1.4462 pipe fittings, our duplex steels can be further customized in thickness, size and specification according to the precise requirements of our valuable customers.

Inconel 625 is a non-magnetic nickel-based alloy. Known for its high strength and toughness, high corrosion and oxidation resistance, and excellent fatigue strength, Inconel 625? also offers a very wide operating temperature range, from cryogenics to 2,000¡ãF (1,093¡ãC).

Stainless steel is an alloy of iron that is resistant to rusting and corrosion. It contains at least 11% chromium and may contain elements such as carbon, other nonmetals and metals to obtain other desired properties. Stainless steel’s resistance to corrosion results from the chromium, which forms a passive film that can protect the material and self-heal in the presence of oxygen
Completely and infinitely recyclable, stainless steel is the ¡°green material¡± par excellence. In fact, within the construction sector, its actual recovery rate is close to 100%.
Stainless steel is also environmentally neutral and inert, and its longevity ensures it meets the needs of sustainable construction. Furthermore, it does not leach compounds that could modify its composition when in contact with elements like water.
Stainless steel must contain at least 10.5 percent chromium. Depending on the grade, it may contain much higher chromium levels, and additional alloying ingredients like molybdenum, nickel, titanium, aluminum, copper, nitrogen, phosphorous or selenium.
In addition to these environmental benefits, stainless steel is also aesthetically appealing, extremely hygienic, easy to maintain, highly durable and offers a wide variety of aspects. As a result, stainless steel can be found in many everyday objects. It also plays a prominent role in an array of industries, including energy, transportation, building, research, medicine, food and logistics.

They can be furnished in accordance with a variety of ASME and MSS standards.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

The ASTM A234 WP5 specification consists of wrought carbon steel and alloy steel in seamless and welded form. The ASTM A234 WP5 Pipe Fittings are widely used in pressure vessel fabrication. These fittings have application under moderate to high temperatures and can also be effectively used in pressure piping systems.

316L elbow is particularly useful in severe corrosive conditions as it is non-magnetic and austenitic stainless steel. It offers brilliant resistance to oxidation and pitting. Pipe Fittings SS 316 /316L is ideal for many industrial processes that require a high resistance in harsh environments. These tubular fittings can withstand many acidic solvents, chemicals as well as chloride pitting. We are widely known for delivering products according to our esteemed customers’ urgent requirements.

C22 can be hot worked or cold worked. However, C22 work-hardens rapidly. Therefore, cold working must often be performed in stages with intervening anneals. Parts should be annealed after cold working.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

They can operate in a temperature range of 450¡ãC to 850¡ãC. They can also be customized to specific requirements and have passed various tests to confirm maintaining the performance of this SS 316L eccentric reducer.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Stainless Steel 304 Pipe Fittings are made from seamless steel pipes whereas ERW pipes are made from ERW steel pipes.

The strength of Inconel 625 lies not only in its nickel-chromium base but also the hardening mechanism of niobium and molybdenum.

Carbon steel is a base steel composed of carbon and iron. It may contain other substances in unmeasured quantities or in trace amounts. Carbon steel is classified according to the carbon content mixed with iron. Medium and low carbon steels may have a carbon content of less than 0.3%, while high carbon steels may have carbon content as high as 2%. The percentage difference in content is usually chosen based on solderability. Carbon is known for its ability to withstand high temperatures and strength/stress.