304 stainless steel pipe fittings tee-stainless steel water tee-egr water pipe fitting for auto cooling

Duplex stainless steel 2205 tee consists of branch pipe diameters, which are also tee pipes. These tees have 3 internal holes and can connect pipes of different diameters. Duplex Ss 2205 Reducers are used to accommodate pipes of different sizes in piping systems. These reducers can be concentric or eccentric.

Grade 310S Stainless Steel Butt Weld Pipe Fitting contains low Carbon, with higher Nickel and Chromium content curbing Hydrogen sulphide attack, which used in various industries like heat exchangers, furnace parts, shipbuilding, heat treatment baskets, condensers, offshore etc.
The fittings are shaped up and then heated to a high temperature following a rapid cooling closer to the cooling in still air. This rapid cooling adds to the strength of the Stainless Steel 310 Pipe Fittings and makes them much stronger. The SS 310S Fitting is used in industries like the sea water processing, thermal energy generation plants and much domestic piping as well. 310S SS Weld Fittings is used in different pressure classes to cope up with the pressure containment requirement of the application as well.

These elbows provide good service in harsh environments. The elbow is used to change the flow direction of the medium by 30 degrees.

Due to the addition of chromium, UNS N08800 butt weld elbows are resistant to oxidizing media such as nitric acid, salts and nitrates. These nickel alloy 800HT elbows can withstand high temperature environments and have a good surface finish.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Monelk500, also known as UNS N05500, has the same corrosion resistance as monel400, but has higher mechanical strength and hardness. It has good corrosion resistance and long-term organizational stability.

Duplex steel UNS S32205 fittings (austenitic and ferritic) are widely used for functions requiring excellent corrosion resistance and efficacy. Duplex steel UNS S31803 butt welded pipe fittings generally have excellent corrosion resistance compared to other austenitic steels.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Pipe Fittings are available in various forms like Elbow Fittings, Return Bend Fittings, Cross Pipe Fittings, Cap Pipe Fittings, Tee Pipe Fittings, Stub End Pipe Fittings, Reducer Pipe Fittings, and Coupling Pipe Fittings. Each of these forms has their own role to play as pipe fittings but with common intent of enhancing the pipe utility in various conditions.

ASTM A234 includes both seamless and welded pipe fittings, seamless steel pipe fittings refer to pipe fitting raw materials made from seamless steel pipes and pipes; therefore, welded steel pipe fittings cover fitting raw materials from welded steel pipes.

These fittings material consist of killed steel, forgings, bars, plates, seamless or HFW (fusion welded) pipe products, with filler metal added.A234 WPB pipe fittings are butt welding ends,commonly used to be welded with the steel pipes of A106,A53,GR.B material,or API 5L GR.B material.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

CS ASTM A420 WPL3 Pipe Fittings are combines Good ductility, High strength, Tensile strength, Yield strength, Fatigue resistance, Toughness, Wear resistance and Outstanding corrosion resistance qualities.

UNS N02200 nickel alloy pipe fittings are manufactured from high grade, commercially pure (99.6%) wrought nickel. Nickel 200 fittings are ideal for a wide range of industries including chemical equipment, gas processing, heat exchangers, pharmaceuticals, power generation, and more.

These ASTM A234 WP9 Buttweld Fittings is use in various industries like : Alloy Steel WP9 Buttweld Pipe Fitting uses in Oil and Gas Pipeline.A234 WP9 Contains 0.15% – carbon, 0.3 to 0.6% – Manganese, 8 – 10% Cromium, 0.3% max phosphorus and sulfur.

Pipe or tube is bent using a combination of dies and other various components working in a rotary action.

Stainless steel is an alloy of iron that is resistant to rusting. It contains at least 11% chromium and may contain elements such as carbon, other nonmetals and metals to obtain other desired properties. Stainless steel’s resistance to corrosion results from the chromium, which forms a passive film that can protect the material and self-heal in the presence of oxygen.
A stainless steel pipe system is the product of choice for carrying corrosive or sanitary fluids, slurries and gases, particularly where high pressures, high temperatures or corrosive environments are involved. As a result of the aesthetic properties of stainless steel, pipe is often use in architectural applications.

These Stainless Steel 316L Pipe Fittings have high tensile strength, smooth internal finish, solidity and it is precisely designed. We also offer competitive range of Steel 316L pipe fittings like Stainless 316l tee, Steel 316l pipe reducer, steel 316l elbow, ss 316l butt weld fitting stub end and stainless steel 316l pipe caps in client¡¯s requirement.

Type 317L is a molybdenum-containing austenitic stainless steel designed to provide better corrosion resistance than Type 316L in highly corrosive process environments, especially those containing chlorides or other halides. The low carbon content allows 317L to be welded without intergranular corrosion due to chromium carbide precipitation at grain boundaries. Type 317L is non-magnetic in the annealed state, but can be made slightly magnetic by soldering.

Usually the ASTM A234 WP9 elbows,tees,reducers are made from steel pipes,the caps are made from plates.But the large sizes pipe fittings are commonly manufactured in pieces and welded together.In hot or concentrated solutions, rates of these Alloy Steel WP9 Cross Butt Weld Fittings are typically too high for sensible service life.

Duplex UNS S32205 Butt Weld Heads feature a butt weld for maximum grip during welding and provide great strength to the connection. Therefore, ASME SA182M Duplex Steel S32205 Butt Welded Pipe Fittings can be used for high pressure and high temperature applications. Power plants, desalination plants, chemical plants, food processing plants, and the aerospace industry use dual-phase materials because of their high yield strength and good corrosion resistance.

This dual phase steel butt weld excels in environments that result in premature stopping of austenitic grades. These duplex steels also protect against chloride environments and provide resistance to sulfide stress corrosion.

A butt weld pipe reducer enables there to be a change in pipe size to meet certain hydraulic flow requirements or sometimes it’s just a matter of connecting two different pipe sizes. An eccentric butt welding reducer is a pipe fitting that is used when a pipe on the upstream side of the fitting is larger than the downstream side of the fitting.

The 317L (00Cr19Ni13Mo3, UNS S31726) alloy is a molybdenum-based austenitic stainless steel. It is more resistant to chemical corrosion than conventional chromium-nickel austenitic stainless steels such as 304 alloy. In addition, compared with conventional stainless steel, 317L alloy has higher ductility, stress corrosion resistance, compressive strength and high temperature resistance. It is a low carbon grade or L grade, which is resistant to sensitization during welding and heat treatment.
Compared with 316L, 317L steel has good seawater resistance and SCC resistance, and is used in chemical ships, chemical products Reactor and other chemical equipment requiring high corrosion resistance.

304 and 304L are austenitic alloys, which means that iron carbide or a non-magnetic solid solution of carbon in iron is used to impart corrosion resistance to this stainless steel. We manufacture stainless steel 304/304L forged fittings in socket weld and threaded forms as well as stainless steel 304/304L elbows in standard and non-standard sizes with bend radii from 1D to 10D. We offer stock delivery of Stainless Steel 304/ 304L Fittings, Stainless Steel 304/ 304L Flanges and Stainless Steel 304/ 304L Bends in a variety of standard sizes and types.

Pure titanium is almost 99.2% pure and is a lustrous metal with low density and high corrosion resistance.

These salts may develop when hydrochloric acid comes in contact with iron and copper. Therefore, if this alloy is used in conjunction with iron or copper piping in a system containing hydrochloric acid, the presence of these salts could cause the alloy to fail prematurely.

Ordinary steel fittings are susceptible to chloride stress corrosion cracking. However, ASME SA815 Duplex Pipe Reducers are better because they inhibit deformation and avoid corrosion cracking even at high temperatures. UNS S31803 Duplex Steel Tee is said to have amazing resistance to toxicity and elasticity, so it is used in the gas desulfurization industry. WERKSTOFF NR. 1.4462 end caps are highly resistant to intergranular corrosion and are therefore used for termination connections.

The Carbon Steel A234 WPB Smls Reducer is a seamless product that reduces the diameter of the pipeline.Unless specified for carbon steel plates or sheet, the steel may be made to either coarse grain or fine grain practice. Which ASTM A234 WP9 shall be made to fine grain practice.

HT PIPE has an excellent production company for designing and developing superior Pipe Fittings SS 316/316L. During the testing and production phases, our expert team examines strictly SS 316/316L buttweld pipe fittings.