304 stainless steel pipe fittings tee-stainless steel water pipe fitting-egr water pipe fitting for auto cooling

Advantages of 304/304L stainless steel pipe fittings, 304/304L flanges Excellent corrosion resistance in a wide range of atmospheric environments, good oxidation resistance in intermittent use at 870¡ãC and continuous use at 925¡ãC, good Resistant to carbide precipitation, good machinability, stainless steel 304H provides higher strength at elevated temperatures and excellent weldability with and without filler metals.

ASTM A403 WP304L covers the standard for wrought austenitic stainless steel fittings for pressure piping applications. The material for fittings shall consist of forgings, bars, plates, or seamless or welded tubular products.

304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel.When it comes to uses, SS304 can be found in kitchen sinks and other appliances such as toasters and microwave ovens. SS304 is also used to make pressure vessels, wheel covers as well as for building facades.

We are a manufacturer of stainless steel 304 butt welded pipe fittings, offering a variety of constructions, styles, details, evaluations and sizes, each fitting to meet industry needs. The stiffness of 75 ksi ensures unparalleled finesse, with a high enough stack load limit to work at a stable weight.

Stainless steel 316L fittings are one such product, made from grade 316 with a lower carbon content. Low carbon is indicated by the suffix letter “L”. They show higher resistance to oxidation and corrosion.

Hastelloy C276 is one of the few grades resistant to wet chloride gas and chlorine dioxide.

Incoloy Alloy 800 is widely used in equipment that must have high strength and resistance to oxidation, carburization and other harmful effects of high temperature exposure. For services requiring optimum creep and rupture properties, use Incoloy 800H or 800 HT. The high content of nickel and chromium in the alloy also provides good corrosion resistance.

The UNS S32750 standard of Pipe Fittings consists of 25% chromium, 4% molybdenum, and 7% nickel. The UNS S32750 Pipe Fittings have a 50-50 microstructure of ferritic and austenitic steel grades with improved strength.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Monel 400 is a nickel-copper alloy (about 67% Ni ¨C 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions.?Butt-weld and forged fittings are available.Excellent corrosion resistance in many acidic and alkaline environments Especially suitable for reducing conditions. Good ductility and thermal conductivity Ideal for seawater applications.

Incoloy 800H Pipe Fittings (UNS N08810) is in fact an iron-nickel-chromium alloy having the same basic composition as Incoloy 800, with significantly higher creep rupture strength.

Strong and Oxidation Resistant to 2200 Deg. F (1200 Deg. C) – HASTELLOY X pipe bend is a solid solution strengthened grade has good strength and oxidation resistance up to 2200 Deg. F (1200 Deg. C).

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

ASTM A234 WP22 Pipe Fittings are made up of the specification that has carbon, manganese, silicon, sulfur, phosphorous, chromium and molybdenum in its composition. The molybdenum content is 0.9-1.1% of the composition which makes this grade specific. This grade has a tensile strength of 380MPa minimum and a yield strength of 585MPa minimum.

Both AISI 04 stainless steel and 304L stainless steel provide a general purpose stainless steel with good resistance to atmospheric corrosion, to many organic and inorganic chemicals and to food and beverages.

Monel 400 Butt Weld Reducers are resistant to aggressive solvents, acids and bases, and seawater, are highly robust at high temperatures, and are also operable for use in many marine engineering applications.

Our Alloy Steel A234 WP9 Pipe Elbow are available in a number of pipe end connections, like threaded, bevelled, square, grooved, bent, barbed and seamless and in a variety of wall thickness.The salts in Alloy Steel WP9 Pipe Reducer may create when hydrochloric acid interacts with iron and copper.

316 pipe bend is primarily used in construction and infrastructure because it is strong, resistant to pitting, and corrosion resistant in most circumstances.

The Stainless Steel Fittings Manufacturers produce these fittings with the addition of manganese, phosphorus, carbon, silicon, and sulfur apart from the 2 main elements.

ASTM A403 WP321 pipe fittings mean the pipe fitting which material is Wrought Austenitic Stainless,they are used for the pressure piping systems of moderate and high temperature services.

ASTM A403 WP321H is the higher carbon (0.04¨C0.10) version of the alloy. It was developed for enhanced creep resistance and for higher strength at temperatures above 1000¡ãF (537¡ãC). In most instances, the carbon content of the plate enables dual certification. Alloy 321 cannot be hardened by heat treatment, only by cold working. It can be easily welded and processed by standard shop fabrication practices.

Monel 400 is a Nickel-Copper alloy, resistant to sea water and steam at high temperatures as well as to salt and caustic solutions.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

316 Fittings cover the standard for wrought austenitic stainless steel fittings for pressure piping applications. The material of pipe fittings shall include forgings, bars, plates or seamless or welded pipes.

The 2.4858 Long Stub End uses modern technology to provide these fittings with the perfect thickness, high strength and standard length. If desired, we can also customize these ASTM B366 Incoloy N08825 end caps to the end user in the application. They can withstand high pressures when transferring liquids.

In our factory, all fittings, such as 90¡ã carbon steel short radius elbow pipe fittings, go through a strict quality inspection system at all stages of production. This rigorous quality inspection ensures that our buyers receive only our highest quality products. These ANSI/ASME B16.9 90¡ã Stainless Steel Short Radius Elbows 1.5d are designed to international quality standards. As a result, these ASME B16.9 short radius elbows are dimensionally corrosion resistant and durable.

304 stainless steel elbow is a pipe fitting that connects two pipes with the same or different nominal diameters in the piping system, so that the pipes are bent at a certain angle. According to the angle, the most commonly used are 45¡ã, 90¡ã, 180¡ã. In addition, according to engineering needs, other abnormal angle elbows such as 60¡ã are also included. The connection methods with the pipeline include direct welding (the most common method), flange connection, threaded connection, socket connection, etc.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Stainless steel, thanks to its passive chromium oxide coating, does not react with other substances. Thanks to this, it can be freely used in contact with food. Strict HACCP standards require the use of stainless steel in contact with food. All because steel is non-toxic and easy to keep clean. Stainless steel elements can be cleaned with most common detergents and we do not have to worry that the steel surfaces will lose their properties or change their appearance.

For industrial purposes, in pipeline systems usually we need to change the transmission direction; Adjust fluids (oil and gas, water, slurry) flow rate; Open or close the pipelines, etc. So to complete these activities, steel pipe fittings will be applied.