304 steel pipe S30400 tube

Nilo Alloy 36, W.Nr 1.3912, Invar 36® is a nickel-iron, low controlled expansion alloy that contains 36% nickel and possesses a rate of thermal expansion approximately one-tenth that of carbon steel.
Invar 36 Specifications: UNS K93600, W.Nr 1.3912

ASME B36.19M is the standard specification for stainless steel pipes, which specifies the dimensions, tolerance, and manufacturing requirements for both welded and seamless pipes.

Inconel 718 is a nickel-chromium-based alloy that is commonly used in high-temperature applications such as aerospace and gas turbines. One of the most important factors in the production of ASTM B670 Inconel 718 Sheet is the plate rolling process. There are two main types of Inconel 718 plates available on the market: hot rolled and cold rolled plates.

ASTM A312 TP316 is a standard specification for seamless, straight-seam welded, and heavily cold worked welded austenitic stainless steel pipes used in high-temperature and general corrosive service applications. The 316 Seamless Industrial Steel Pipe is made from a combination of chromium, nickel, and molybdenum, which gives SS 316 Seamless Tube excellent resistance to corrosion and rust.

It demonstrates good resistance to neutral and reducing environments. This alloy creates a tenacious oxide, protective film that does not spall off, but it retains superior oxidation resistance at soaring temperatures.

ASTM A240 Type 2205 Plate is a duplex stainless steel plate that is used extensively in various industries such as chemical processing, oil and gas exploration, and marine engineering. SA 240 GR 2205 Sheet is made from grade 2205 stainless steel, which is a combination of ferritic and austenitic steel.

Alloy 800 is a nickel-iron-chromium alloy with high strength and excellent resistance to oxidation and corrosion at high temperatures. ASTM B407 UNS N08800 Incoloy 800 W. Nr. 1.4876 Welded Pipe is widely used for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500°F (816°C).

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

Incoloy 800H Flange We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

Nickel Alloy 400 and Monel 400, also known as UNS N04400, is a ductile nickel-copper-based alloy consisting primarily of two-thirds nickel and one-third copper. Nickel Alloy 400 is known for its resistance to a variety of corrosive conditions, including alkalis (or acids), salt water, hydrofluoric acid, and sulfuric acid. Since Monel 400 or Alloy 400 is a cold worked metal, this alloy has high hardness, stiffness and strength. By cold working ASTM B164 UNS N04400 bar stock, the alloy is subjected to higher levels of mechanical stress, which in turn causes changes in the alloy’s microstructure.

SMO 254 Pipes can withstand high mechanical stress and Alloy 254 SMO Pipe high pressure work in high temperatures and corrosive environments.

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

304 Piping Spools are made of 304 Stainless Steel, a common and popular material in many industrial applications that require resistance to corrosion and oxidation. These S30400 Piping Spools are prefabricated using specialized machinery and processes, which ensure that they are highly accurate and reliable.

A789 UNS S31803 and UNS S32205 are two grades of duplex stainless steel that are widely used in various industrial applications. These Duplex S31803 Seamless Pipes are known for their excellent corrosion resistance, high strength, and good weldability. A789 is a specification that covers seamless and welded tubes made from duplex stainless steel.

The pipes of seamless configurations have higher load-bearing capacity and strength over other grades.

This provides greatly enhanced resistance to sulfuric acid. It also has a high chromium content, to maximize its resistance to oxidizing chemicals and process streams contaminated with ferric ions and dissolved oxygen.

Inconel 625 Coil is characterized by its excellent resistance to oxidation, high-temperature corrosion and fatigue. ASTM B443 UNS N06625 Inconel Plate is widely used in the aerospace, chemical processing and oil and gas industries due to its superior strength, toughness and durability even in extreme environments.

SCH40 Monel 400 Pipe is designated as Werkstoff Number 2.4360 and UNS N04400. Alloy 400 Pipe also known as Monel Alloy 400 Pipe, Monel 400 Pipe & Nickel Alloy 400 Pipe.

Nilo / Alloy K W.Nr.: 1.3981
UNS: K94610 ASTM F15
Fixed-expansion glass-encapsulated iron-nickel-cobalt alloys, Kovar alloys, have a linear thermal expansion coefficient similar to that of hard glass within a certain temperature range
For mating sealing with hard glass

Common Trade Names: Nickel Alloy 36, Invar 36®, Nilo 6®, Pernifer 6®
Invar 36® is a nickel-iron, low expansion alloy that contains 36% nickel, Invar 36 has a low coefficient of expansion from cryogenic temperatures to about +500°F (260°C).
Invar 36 Tube OD:0.2-6mm, WT: 0.02-2mm

AL6XN is a superaustenitic stainless steel with outstanding resistance to chloride pitting, crevice corrosion and stress corrosion cracking. AL6XN is a 6 moly alloy that was developed for and is used in highly aggressive environments. It has high nickel (24%), molybdenum (6.3%), nitrogen and chromium contents that give it excellent resistance to chloride stress corrosion cracking, chloride pitting, and exceptional general corrosion resistance. AL6XN is primarily used for its improved pitting and crevice corrosion resistance in chlorides. It is a formable and weldable stainless steel.

Nickel-copper-based alloy 400 Monel 2.4360 cold drawn rod is virtually immune to chloride stress-related corrosion cracking when exposed to corrosive media in typical environments. Monel 400 is a copper and nickel based alloy that is popular today due to its high performance. The alloy has excellent acid and alkali resistance. In addition, it has good tensile strength, ductility, excellent thermal conductivity, and can be hardened by cold work. Additionally, it can be used in applications with temperatures ranging from minus to 538 degrees Celsius.

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

The 316 stainless steel pipe has become an indispensable material for the industrial sector. This alloy of iron and chrome is recognized for its high resistance to corrosion, as well as its durability. 316 stainless steel tubing can be produced in both seamless and welded tubes to meet specific customer needs.

Titanium’s density is about 60% that of stainless steel and nickel alloys, this weight saving makes it a popular choice in applications where this is critical such as aerospace.

316L 1.4401 S31603 Stainless Steel Pipe is a highly versatile and durable pipe option commonly used in a wide range of industrial and commercial applications. This SS UNS S31603 pipe is made from high quality 316L stainless steel with excellent resistance to corrosion, oxidation and staining, making it ideal for harsh environments or high stress applications.

Nickel 200 flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

UNS N08367 also commonly referred to as alloy AL6XN is a low carbon, high purity, nitrogen-bearing “super-austenitic” nickel-molybdenum alloy with excellent resistance to chloride pitting and crevice corrosion.

It is able to withstand a wide range of oxidizing and non-oxidizing chemicals, and exhibits outstanding resistance to pitting and crevice attack in the presence of chlorides and other halides.

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

NAS NW276 is a Ni Cr Mo alloy with excellent corrosion resistance in both oxidizing and reducing atmospheres. In this alloy, carbide precipitation in the heat affected zone (HAZ) is suppressed and corrosion resistance is improved by reducing the contents of C and Si.

Hastelloy G30 is a combination of nickel, chromium, iron, cobalt, molybdenum, tungsten and manganese. Hastelloy G30 is primarily used to provide high resistance to chemical conditions. Hastelloy G30 is a high performance alloy with surface stability at high temperatures. In the welded form, the corrosion resistance is also carried over. Hastelloy G30 fasteners are highly ductile. Hastelloy G30 resists deformation at high temperatures. Hastelloy G30 is used in applications requiring high corrosion and deformation resistance. Using cold working, these fasteners are hardened. These fasteners have high oxidation resistance.

304 stainless steel has good oxidation resistance in intermittent use up to 870¡ãC and continuous use up to 925¡ãC. However, if corrosion resistance in water is required, continuous use at 425-860¡ãC is not recommended. In this case, 304L is recommended because of its resistance to carbide precipitation.

All our ranges of 310 310S Stainless Steel Flanges that we provide are designed by effectively using pure quality of raw material, using refined technology and not to forget as per the national and international product quality standards.

When it comes to connecting different sections of carbon steel pipes, ASME B16.9 A234 WPB Carbon Steel Pipe Butt Welded Fittings are the go-to solution. These fittings are designed to provide a reliable and secure connection, while also ensuring excellent flow through the system.

To strengthen and harden the steel and cast iron alloy Carbon Steel Slip On Flanges are passed through a process known as quenching.

Nickel alloy 20 is a low-carbon, niobium-stabilized austenitic nickel/iron/chromium alloy with additions of molybdenum and copper. ASTM B366 specification covers Inconel, Monel, Hastelloy and Nickel Alloy Pipe Fittings used in acidic and sea water.

Duplex 2205 bolts are among the most commonly used duplex grades. These are called standard duplex steel fasteners. There are different types of fasteners such as studs, bolts, nuts, screws, etc. Duplex stainless steel fasteners are used in chemical processing, transportation, storage, oil and gas, marine, paper and pulp, wine and many other industries. A wider range of applications is possible due to the combination of corrosion resistance, high temperature capability and high pressure resistance of Duplex Steel 2205 Nuts and Bolts.

Duplex 2507 is a super duplex stainless steel containing 25% chromium, 4% molybdenum and 7% nickel. This alloy is designed for applications requiring excellent strength and corrosion resistance.

Inconel 625 round bar is one of the more common grades of Inconel round bar available. The Round Bar is AMS 5666 compliant. Inconel 625 can be used in a variety of applications. Inconel 625 has high strength, excellent fabrication and excellent corrosion resistance. The viable temperature range for Inconel 625 starts at cryogenic temperatures up to 1800¡ãF.

Stainless steel 310 sheet is a medium carbon austenitic stainless steel, for heat applications such as furnace parts and hotness procedure tools.

Incoloy 800-800H-800HT bolts are a nickel-iron-chromium alloy with good strength and resistance to oxidation and carburization under high temperature exposure. These nickel-steel alloys are the same, except the 800H alloy has a higher carbon content, and up to 1.20% aluminum and titanium have been added to the 800HT alloy. General corrosion resistance is considered by many to be very good. Alloys 800H and 800HT exhibit excellent creep and stress rupture under solution annealed conditions.

Due to the excellent physical and mechanical properties of Super Duplex, the quality of Super Duplex steel fasteners can meet the high demands of the gas, oil and marine industries.

A350 LF3 material is often referred to as low temperature carbon steel fittings or flanges.

Generally speaking, the carbon-free content of carbon steel pipe flanges is lower than that of molten flanges. They don’t oxidize very quickly. They are flat and fairly light in construction, and the fused flanges have excellent mechanical properties. Improper forging methods often result in broad or irregular grains; hardening cracks and forging are taller than cast flanges.

Inconel 718 studs and other fasteners have different types of threads. Available in BSW, UNC, BSF, UNF, Metric or others as required.

Duplex 2205 is a nitrogen-enhanced duplex stainless steel designed to solve common corrosion problems encountered with 300 series stainless steels. “Duplex” describes a family of stainless steels that are neither fully austenitic (such as 304 stainless steel) nor purely ferritic (such as 430 stainless steel).
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.65

La aleacion C276 se considera una de las listas de productos de superaleaciones. Las superaleaciones (o metales especiales) se utilizan en entornos hostiles debido a su capacidad para manejar condiciones corrosivas.

La aleacion es un derivado del acero inoxidable 316 y es una parte integral de las aplicaciones relacionadas con la estructura. Especificaciones como ASTM A312 cubren tuberias de acero inoxidable 316ti de aleacion austenitica de construccion soldada y sin soldadura.

Inconel 718 is highly resistant to phosphoric and sulfuric acids as well as crevice and pitting corrosion. Our Inconel 718 fasteners have good mechanical properties at both room and elevated temperatures.

Alloy 600 is not an age hardening alloy; cold working is the only hardening method available.

Inconel X750 is a nickel-chromium alloy that has been used for both wrought products and castings. Inconel X750 offers excellent resistance to corrosion and oxidation along with high strength and good toughness properties at elevated temperatures.

A blind flange is a solid flange as shown below. The purpose of these is to block off a section of pipe or a nozzle on a vessel that is not used.

UNS N08926 forging rings, UNS N08926 forging spindles, UNS N08926 forging bars,UNS N08926 forging gears that are used in power transmission, turbine,gas compressor,gear boxes and so on.

BS10 Table D, Table E, DIN Standard Flanges, SS UNS S31635 Pipe Flanges, Stockist of SS 316Ti Slip On Flanges, Global Supplier of SS 316Ti Weld Neck Flange, Stainless Steel 316Ti Flanges, ANSI B16.5 SS 316Ti Orifice Flanges, SS F316Ti Flange, SS 316Ti Blind Flanges

In addition to good corrosion resistance and high tensile strength, Duplex 2205 Hex Bolts also have high surface toughness. This and the passive oxide layer formed by the addition of chromium is the reason why 2205 duplex stainless steel fasteners are used in the marine industry.

Our supplied 309 Stainless Steel Flanges are hardness test and other mechanical tests of tensile of the area and so on before packaging and transportation to guarantee long lasting service to the customers.

Monel K500 Washers have the same basic iron and carbon composition, but steel also contains a healthy dose of chromium that gives its famous corrosion resistance.

Hastelloy X Nippo Flange is additionally being offered in customized sizes and shapes to our customers. Hastelloy X Socket Weld Flange is extremely ductile, exhibits excellent weldability, and is definitely fabricated into industrial components. Hastelloy X Ring Joint Type Flange is a fully austenitic advanced corrosion-resistant alloy that gives resistance to both aqueous corrosion and attack at elevated temperatures. Hastelloy X Flanges has greater thermal stability than Hastelloy B-2 Flanges.

Monel 400 is corrosion resistant to most salts, water, alkalis, organic substances, food products, and atmospheric conditions at both normal and elevated temperatures.