304L rf wn flange sch80 wholesale

ASME B36.19M is the standard specification for stainless steel pipes, which specifies the dimensions, tolerance, and manufacturing requirements for both welded and seamless pipes.

Flange is the parts which connects two pipe ends, flange connection is defined by the flange, gasket and bolt three are connected as a group of combined sealing structure of the detachable connection. The gasket is added between the two flanges and then fastened by bolts. Different pressure flange, thickness is different, and the bolts they use are different, when pump and valve connect with pipe, the parts of the equipment are also made of the corresponding flange shape, also known as flange connection, usually closured bolted connection parts are also known as flanges, such as the connection of ventilation pipe, this kind of parts can be called “flange type part”, but this connection is only part of a device, such as the connection between flange and water pump, it’s not inapposite to call water pump as flange type parts,but relative small valve,it can be called as flange type parts .

Although molybdenum is a good element, excessive use of it may reduce the creep ductility of Gr F11 plate flanges. Graphitization and decomposition of iron carbide may occur when the temperature exceeds 500 degrees Celsius. Chromium has been added to SA A182 F11 alloy steel CL.2 forged pipe flanges to prevent creep ductility reduction and graphitization. In addition, the added chromium also provides oxidation resistance.

Stainless Steel UNS S30400 Socket Weld Flanges also offer higher creep, rupture stress and tensile strength at elevated temperatures, excellent corrosion resistance and strength properties, making them ideal for manufacturing or forming applications.

Spectacle Blinds are simple safety devices that are installed between two pipe flanges. During normal operation, the open end is installed as a spacer to allow uninterrupted flow. To stop the flow in the pipeline, the blind end is rotated into place between the flanges.

Stainless Steel 304 weld neck flanges
Sometimes called a blanking flange; use to blank off pipelines, valves, and pumps, or as an inspection cover. Suitable for use with Schedule 40 or 80 stainless steel pipe, in applications with air, water, natural gas, and steam.

Slip-on flanges, also known as ‘hubbed flanges’, have a hub with a very low profile. This type of flange is usually connected to a pipe by one or two fillet welds (one outside the flange and one inside the flange), it is however possible to use only a single weld.

ASME B16.5 flanges are available in sizes 1/2″ to 24″ in classes 150, 300, 400, 600, 900, 1500, 2500.

ASME B16.47 317L Pipe Flange hardenability will be reduced if constant feeds and low speeds are used. 317L Stainless steel Flanges can be welded using fusion and resistance methods.

Smo 254 Flanges has even been found to be a more cost effective solution for high nickel and titanium content alloys.

SAE 304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel. It is less electrically and thermally conductive than carbon steel. It is magnetic, but less magnetic than steel. It has a higher corrosion resistance than regular steel and is widely used because of the ease in which it is formed into various shapes.[1]

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

Stainless Steel 316L Flange is used to terminate the end of a piping system. The Stainless Steel 316L blind flange is basically a flange that does not have a hub or a bored center. Blind flanges have the face thickness of a flange, a matching face type, and similar bolting pattern. Stainless Steel 316L Blind flanges can also be used to seal a nozzle opening on a pressure vessel.

ASME B16.47 Series A are available in Classes 150, 300, 400, 600, 900; that of ASME B16.47 Series B are available in Classes 75, 150, 300, 400, 600, 900

Alloy 317 flange is an austenitic chromium-nickel stainless steel with excellent corrosion resistance. The high molybdenum content of ASME SA182 SS 317 flanges contributes to the grade’s excellent pitting resistance.

It is also a cost-effective alternative to less expensive alloys, such as Type 316, that do not have the strength or corrosion resistance required to minimize life cycle costs in certain applications.

ASTM A182 Flange is a method of connecting pipes, valves, pumps and other equipment to form a piping system. It also provides easy access for cleaning, inspection or modification. Flanges are usually welded or screwed. Flanged joints are made by bolting together two flanges with a gasket between them to provide a seal.

UNS N08904 Flange
UNS N08904, A182 F904L is designed for moderate to high corrosion resistance in a wide rangeof process environments. The combination of high chromium and nickel content, coupled with additions of molybdenum and copper, assure good to excellent corrosion resistance.With its highly alloyed chemistry¡ª25% nickel and 4.5%molybdenum, 904L provides good chloride stress corrosion cracking resistance, pitting and general corrosion resistance superior to 316Land 317L molybdenum enhancedstainless steels.Alloy 904L was originally developed to withstand environments containing dilutesulfuric acid. It also offers good resistance to other inorganic acids such as hot phosphoric acid as well as most organic acids.

The 304L Stainless Steel Flange Pressure Ratings differ ranging from 150 to 2500 and PN6 through PN64. The temperature tolerance is also high for these flanges and they can operate at up to 870 degrees Celsius.

The addition of molybdenum and chromium to its alloys ensures better mechanical properties and a certain degree of corrosion resistance. ASTM A182 F22 Class 3 flanges have good atmospheric corrosion resistance and some resistance to scaling when they are exposed to high temperatures. The addition of molybdenum to alloys is generally associated with high stiffness and hardness. Therefore, when included in the chemical composition of Astm A182 F22 Class 1 WNRF Flanges, its toughness gives the alloy an advantage over conventional carbon steel grades.

304 stainless steel is a low carbon (0.08% max) version of base 18-8 (also known as 302). Type 302 contains 18% chromium and 8% nickel. Type 304 is slightly less strong than 302 due to its lower carbon content. Type 304 is used in welding applications because the low carbon allows some exposure in the carbide precipitation range of 800¡ãF – 1500¡ãF without the need for a post annealing operation . However, the severity of corrosive environments may require annealing after welding or using 304L. Type 304L has a carbon content of 0.03% or less.

ASTM A182 F316 is a forging material specification for 316 grade stainless steel and is used for manufacturing bare forgings or forged and machined products for applications involving high temperature service.

SS 317 / 317L Flanges, which is available in different sizes and shapes to our esteemed clients. These Stainless Steel 317 Flanges is a molybdenum containing, low carbon austenitic stainless steel with increased additions of chromium, nickel, and molybdenum.

Grade 310s Stainless Steel Flanges is readily available for applications in the industrial, architectural, and transportation fields. Grade 310s also has outstanding welding characteristics. Post-weld annealing is not required when welding thin sections.

321H Stainless steel Flange is a modification of 321 steel flange with a higher carbon content, to provide improved high temperature strength.

SAE 304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel. It is less electrically and thermally conductive than carbon steel. It is magnetic, but less magnetic than steel. It has a higher corrosion resistance than regular steel and is widely used because of the ease in which it is formed into various shapes.[1]

It is important that the material used for any project has the correct mechanical properties for the specific application. Heat treatment processes are often used to alter the mechanical properties of metals, and one of the more common heat treatment processes is normalizing.

Stainless steel flanges will not be corroded, pitted, rusted and easy to wear. Stainless steel is one of the metal materials with the highest strength for building.

The threaded flange design (also called a ‘screwed flange’) uses a screw thread to connect the flange to a pipe. A male thread is cut onto a pipe end whilst a female thread is cut into the bore of the flange; the male threaded pipe is then screwed into the female threaded flange.

A flange is a ring of steel (forged, cut from plate, or rolled) designed to connect sections of pipe, or to join pipe to a pressure vessel, valve, pump or other integral flanged assembly. Flanges are joined to each other by bolts, and to the piping system by welding or threading (or loose when stub ends are used). Stainless steel flange simplified as SS flange, it refers to the flanges that made of stainless steel. Common material standards and Grades are ASTM A182 Grade F304/L and F316/L, with pressure ratings from Class 150, 300, 600 etc and to 2500. It used in more industries than carbon steel as stainless steel has better resistant performances on corrosion environment and always provides with a good appearance.

SAE 304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel. It is less electrically and thermally conductive than carbon steel. It is magnetic, but less magnetic than steel. It has a higher corrosion resistance than regular steel and is widely used because of the ease in which it is formed into various shapes.[1]

Flanges are of great advantage for high pressure industries where pitting due to chlorides is involved: they contribute to increased high temperature strength. Our brand of SS 316/316L Threaded Flanges (WNRF) offers essential properties such as high corrosion resistance, superior set-up resistance, and greater resistance to wear than 304 stainless steel flanges.

SS 316/316L flanges can be fabricated from ASTM A182 F316 or F316L forgings, ASTM A351 CF8M or CF3M castings, and ASTM A240 316 or 316L plates per ASME B16.5 and ASME B16.47.