316 28mm stainless astm a479 304h uns s30409 a276 304 sus304 super duplex steel round bar tgp

Stainless steel 316 round bar is a product made of stainless steel. Different industries use different grades of stainless steel. Stainless steel rods are used for their strength and corrosion resistance.

Grade 316L is a low carbon version of grade 316 stainless steel with increased resistance to surface corrosion and can be used in the same temperature range. It is also more commonly used in applications that require large size components to be welded. Although the 316/316L is widely considered the default choice for applications requiring marine grade products, it has reduced performance in warm salt water.

High strength for stainless steel bars
Stainless steel tends to have higher tensile strength than mild steel. Duplex stainless steels have higher tensile strength than austenitic steels. Martensite (431) and precipitation hardening grades (17-4 PH) have the highest tensile strength. These grades are twice as strong as the most commonly used stainless steels, 304 and 316.

The most common problem with stainless steel alloys is that they tend to undergo a process called oxidation. Oxidative corrosion can weaken the structural integrity of any project. Use appropriate materials in combination with a good finish delay, or in some cases prevent corrosion. One such example is the use of 310 stainless steel round bars, which have excellent corrosion resistance. As a heat-resistant alloy, this austenitic steel is considered a versatile multi-faceted grade. From food processing to furnaces, grade stainless steel 310 round bars are used in countless ways.

Grades 303 and 304 are interchangeable in many cases, but the composition of each grade is slightly different, making either of them the obvious choice for certain applications.

Hardening properties of stainless steel
The advantage of work-hardenable grades of stainless steel is that the strength of the metal can be significantly increased simply by cold working. A combination of cold working and annealing stages can be employed to impart a specific strength to the manufactured part. A typical example is wire drawing. The wire used as the spring will be work hardened to a specific tensile strength. If the same wire is used as a bendable tie wire, it is annealed, resulting in a softer material.

Grade 316 is known for its toughness and excellent corrosion resistance. This alloy has proven useful in many metal engineering projects, especially in exterior and coastal applications and where welding is required. Machining at level 316 is a little more difficult, but can be done successfully with the right tools.

F55 round steel is produced by a combination of rolling and forging. They are used for application flame hardening where the surface hardness needs to meet the general standard of ASTM A182 F55. Another bar standard, UNS S32760 F55 Rods, has a high fatigue strength of 450 MPa and a modulus of elasticity of 200 GPa.

Some of the properties found in these stainless steel round bars are excellent general corrosion resistance, resistance to sensitization, ease of manufacture, good formability, high tensile strength, robust construction, corrosion resistant body, long service life, high temperature resistance, Good dimensional accuracy and surface smoothness finish. In our high-operations manufacturing, the development of high-grade round bars is done under the appropriate supervision of a team of dedicated experts.

SS 304L Square Bar has a multipurpose steel section which is mainly used for manufacturing and repairs. It is a part of our light and re-rolled section, making it suitable for everyday commercial projects.

Steel bars are one of the core components of any manufacturing
industry or for that matter any industry that relies on machineries.
Thanks to its versatile applications, steel bars find itself in the
epicenter of most of engineering industries, be it automotive, textile,
fabrication, construction, cement, ship building, paper and pulp,
defence, heavy earth moving equipments or aerospace.
The overwhelming popularity of steel bars is owed to the fact that
it is possible to be produced in varying types, shapes, sizes, and
grades of bars to cater the exact technical requirements. Steel
bars generally have the shapes such as flat, round, hexagonal,
square and channel and on most of the occasions, it is the shape
of the bar that defines its application area

304 stainless steel is the most common form of stainless steel used around the world due to excellent corrosion resistance and value. 304 can withstand corrosion from most oxidizing acids. That durability makes 304 easy to sanitize, and therefore ideal for kitchen and food applications.
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

This stainless steel round bar is very weldable. Strength, corrosion resistance and simplified manufacturing can make it a cost-effective alternative to high strength carbon steel and other stainless steel grades.

Stainless Steel 410 Hollow Rod resists grain boundary precipitation structures in the weld heat affected zone, which makes it useful for most welding forms of chemical procedures. These stainless steel 410 hex bars have good resistance to stress corrosion cracking and pitting corrosion. Well, the low carbon content in these stainless steel 410 triangular bars minimizes grain boundary carbide precipitation throughout the welding process, designed to maintain corrosion resistance in the heat affected zone of the welded joint.

Stainless steel round bars are also sometimes called bright bars or solid bars. Since it is made of stainless steel containing chromium, this product has excellent corrosion resistance. Those grades with higher alloy content have the added benefit of being highly resistant to acid, chlorine and alkaline solutions. These properties, combined with inherent strength and longevity, have helped make stainless steel round bars popular in industries such as transportation, construction, automotive, and petrochemicals.

ASTM A479 Round Bar has one important thing going for them: they are made from stainless steel. Stainless steel is corrosion resistant and the stainless steel which has higher alloy content are able to withstand the onslaught of acids, “chlorine bearing environments” as well as solutions containing alkaline.

As a stainless steel bar grade supplier, HT PIPE offers bar products and services. Stainless steel is not a single material, but a name for a family of corrosion-resistant steels. Like many scientific discoveries, the origin of stainless steel was an accident. In 1913, Sheffield, England, Harry Brearley was working on the development of a new steel alloy for gun barrels. He noticed that some of his samples did not rust and were difficult to etch. These alloys contain approximately 13% chromium. The first application of these steels was in cutlery, for which Sheffield subsequently became famous. Concurrent work in France led to the development of the first austenitic stainless steels.

Applications for 410 stainless steel rods are valve and pump parts, fasteners, cutlery, turbine parts and bushings.

Stainless steel 304 round bars are made of stainless steel with a composition of 18% chromium and 8% nickel. The material has corrosion resistance and strength properties. HT PIPE is one of the leading manufacturers and suppliers of stainless steel 304 round bar products. The material is strong, with a minimum tensile strength of 515MPa and a minimum yield strength of 205MPa. It can also operate at high temperatures.

Stainless steel bars or rods are used in a variety of applications and are widely used in the construction industry due to their durability and resistance to corrosion and rust.
We stock bars and rods in diameters ranging from 3mm to 76.2mm, lengths up to 3m and available in 3 metal grades.
303 – has good corrosion resistance, can be freely processed, not suitable for welding or forming.
304 – has good corrosion resistance, suitable for forming and welding, general machining.
316 – is our highest grade, has excellent corrosion resistance, is suitable for forming and welding, but is slightly more difficult to machine.

The high strength and corrosion resistance of AL6XN alloys make them a better choice than traditional duplex stainless steels and a cost-effective alternative to more expensive nickel-based alloys, which offer excellent formability, weldability, strength and Corrosion resistance.

316 stainless steel round bar has a very wide range of industrial applications due to its unique performance characteristics, including excellent corrosion resistance and easy formability. Grade 316 stainless steel is differentiated by its molybdenum content, which supports its excellent resistance to oxidation. Grade 316L is a reduced carbon version of the standard Grade 316 and is recommended for applications requiring allergy resistance.

Another advantage of grade 304 stainless steel bar over grade 303 is that it is slightly harder and has better corrosion resistance. Because of this, grade 304 stainless steel bar is used in large quantities in the manufacture of fasteners and fixtures such as nuts, bolts, washers, clips, fittings and clamps. Products made from grade 304 stainless steel in the fastener industry are often referred to as “A2”.

The benefits of using stainless steel 304/304L round bars include low carbon content, which eliminates carbon precipitation during welding. Stainless steel 304L round bars have higher tensile yield strength and have low temperature properties that respond well to cold work hardening.

431 is a high chromium, low nickel, high hardenability martensitic stainless steel with high strength and good corrosion resistance. Compared to other 400 stainless grades, 431 stainless steel is designed to improve corrosion resistance and toughness, especially in quench hardened stainless steel. The 431 will perform well in marine environments as well as in aerospace applications such as aircraft fasteners and accessories. This alloy has great impact strength at high hardness levels.

HT PIPE is one of the well-established manufacturers and suppliers of Stainless Steel 316Ti Bar.

Stainless steel round bars 3mm to 90mm cold drawn and polished, larger diameter peeled and polished. Stainless steel round bars are ordered according to ISO H9 (H tolerance is negative). European Steel Stock Stainless Steel Round Bars are available in the following grades 303, 304, 316, 431 EN 57, 904L Other grades available on request. The length is random and varies between 4 and 6 meters. We offer a full cut service so we can provide the exact size and length you need.

Steel bars are one of the core components of any manufacturing
industry or for that matter any industry that relies on machineries.
Thanks to its versatile applications, steel bars find itself in the
epicenter of most of engineering industries, be it automotive, textile,
fabrication, construction, cement, ship building, paper and pulp,
defence, heavy earth moving equipments or aerospace.
The overwhelming popularity of steel bars is owed to the fact that
it is possible to be produced in varying types, shapes, sizes, and
grades of bars to cater the exact technical requirements. Steel
bars generally have the shapes such as flat, round, hexagonal,
square and channel and on most of the occasions, it is the shape
of the bar that defines its application area

Stainless steel rods are popular for their corrosion resistance and are widely used in the construction of building foundations, bridges and marine environments. 304/304L Stainless Steel Round, an economical grade stainless steel ideal for all applications requiring strength and superior corrosion resistance.

The balanced austenitic structure of Grade 321 enables deep drawing without intermediate annealing, which makes this grade dominant in the manufacture of drawn stainless steel parts such as sinks, hollowware and pans.