316 forged round bar 317l price astm a479 304 sus304 uns stainless steel rod 304l and316l

904l stainless steel round bar is an austenitic grade alloy. The added molybdenum content in stainless steel 904L square bar alloy gives it excellent resistance to localized corrosion such as pitting and crevice corrosion if compared to alloy grade 316l.

A round bar is a cylindrical metal rod with a radius of 5 mm to 450 mm and a length of 2 to 6 meters. Bars and bars are also available in hexagonal and square shapes. One of them is UNS S32760 round bar, equivalent to Werkstoff NR 1.4410. It has a diameter of 10 to 100 mm, an ultimate tensile strength of 750 ksi and a minimum stress of 550 N/mm2.

Grade 410 stainless steel is a general-purpose martensitic stainless steel containing 11.5% chromium with good corrosion resistance. However, through a series of processes such as quenching, tempering, and polishing, the corrosion resistance of grade 410 steel can be further enhanced. Quenching and tempering can harden grade 410 steel. They are typically used in applications involving mild corrosion, heat resistance and high strength.

Stainless steel UNS S30400 round bars are used to grow a variety of utensils, chemical equipment, cookware and loads of various digital and electrical machinery and parts. They are also used in the cement industry, shipbuilding industry, petrochemical industry, chemical industry, sugar mills, etc.
We use the best metal alloys available to manufacture the round bars and their finish is clean and precise.

Although stainless steel construction has been around since the 60s, it is only in recent decades that the industry has shown great interest. The main reasons are small quantity, irregular consumption, small supply, long delivery time, high price and little knowledge of materials. HT PIPE focused on these market deficiencies in the early 90s and achieved some significant changes by strengthening the supply network and introducing new manufacturing techniques. Today, HT PIPE is a well-known supplier and shareholder of stainless steel structural profiles and stainless steel bright strips.

Stainless steel round bar, as the name suggests, is a product made of different grades of stainless steel material. Depending on the grade of stainless steel, they can be used in various industries. These round bars have high strength, and due to their high chromium content, they are effectively resistant to corrosion.

The standard for ASTM A276 specification covers both, hot -finished or cold-finished stainless steel bars with the exception of re-forged bars. The ASTM A276 Type 304 is one of the most commonly used and versatile grades of stainless steel.

316 stainless steel round bars are ideal for most machining techniques and for indoor and outdoor applications. AISI 316 stainless steel is a non-magnetic, high-strength material with excellent corrosion resistance. 316 is slightly stronger than 303 and 304 stainless steel. Making it ideal for the food and pharmaceutical industries, as well as in areas involving marine environments, aerospace, process equipment, chemicals or other aggressive substances.

Stainless steel bars or rods are used in a variety of applications and are widely used in the construction industry due to their durability and resistance to corrosion and rust.
We stock bars and rods in diameters ranging from 3mm to 76.2mm, lengths up to 3m and available in 3 metal grades.
303 – has good corrosion resistance, can be freely processed, not suitable for welding or forming.
304 – has good corrosion resistance, suitable for forming and welding, general machining.
316 – is our highest grade, has excellent corrosion resistance, is suitable for forming and welding, but is slightly more difficult to machine.

Precipitation hardening stainless steels are characterised by the addition of aluminium, niobium and copper to very high strengths Relatively machinable without significant deformation, depending on the additives more or less corrosion resistance compared to other types but higher Corrosion resistance results in considerable costs.

Stainless steel round bars are available in three grades. 304 is the most common grade with easy weldability, good formability and corrosion resistance. Grade 316 offers excellent corrosion resistance, making it ideal for harsh environments such as salt water or heavy industrial areas. Like grade 304, it is also easy to weld, but more difficult to machine. Finally, grade 303 is easier to machine, drill and cut than other grades. However, it is not as suitable for welding as grades 304 and 316.

Grade 316L is a low carbon version of grade 316 stainless steel with increased resistance to surface corrosion and can be used in the same temperature range. It is also more commonly used in applications that require large size components to be welded. Although the 316/316L is widely considered the default choice for applications requiring marine grade products, it has reduced performance in warm salt water.

These stainless steel 304 round bars and rods are the common 18/8 in stainless steel aggregates. Specifications include excellent weldability and an unbiased austenitic structure, and these stainless steel 304 bars are mostly used as part of transport and modern machines. SS 304L bar (UNS S30403) is a standard “18/8 stainless steel” commonly found in pans and cooking utensils.

High strength for stainless steel bars
Stainless steel tends to have higher tensile strength than mild steel. Duplex stainless steels have higher tensile strength than austenitic steels. Martensite (431) and precipitation hardening grades (17-4 PH) have the highest tensile strength. These grades are twice as strong as the most commonly used stainless steels, 304 and 316.

A round bar is a long cylindrical metal bar stock that has many industrial and commercial applications. The most common application is shafts. Products are usually measured by measuring their diameter. Standard diameters range from 1/4″ all the way up to 24″. Other sizes may be available.

Steel pipes can be disintegrated on the basis of its application. Typical applications of steel pipes are in the area of water pipelines, industrial water lines, oil pipe lines, cross country pipe line, agriculture and irrigation pipes, tube lines for natural gas, chemical industries, automobile industry, construction industries and other purposes.

Grade 304 (aka 1.4301, 1.4037, 18/8, A2) Stainless Steel Round Bars
Grade 304 is the most popular stainless grade. These round bars are easily TIG, ARC and MIG welded and can also be brazed. While grade 304 is not a machinable grade of stainless steel (grade 303 is best for machining), it can be machined under the right conditions.

Polished stainless steel bars are made of 304 stainless steel. They have good machinability, good formability and excellent weldability. They also show good corrosion resistance. These rebars are used in a variety of architectural and structural applications. Instead of working wheels, these bars are polished with leather chain straps. This is done for a smoother and brighter surface. They are also available in a mirror finish.

Applications and typical uses of stainless steel round bars are: Offshore (foils, helideck platforms, etc.), food industry, pulp and paper industry, aerospace (turbine blades, etc.), mechanical parts, nuclear waste barrels, valve stems, balls, liners sleeves, valve seats, etc.

347 stainless steel is an austenitic stainless steel with excellent resistance to intergranular corrosion when exposed to chromium carbide precipitation temperatures ranging from 800 to 1500 degrees Fahrenheit. Alloy 347 with tantalum – tantalum (known as niobium) has good mechanical properties at high temperatures.

Martensitic stainless steels are characterized by a higher carbon content than ferritic alloys, allow tempering (hardness treatment), are stronger but less resistant to corrosion than most other stainless steel types, are not particularly formable or formable Welded, more commonly used for stainless steel bars and other long products than plates.

This stainless steel round bar is very weldable. Strength, corrosion resistance and simplified manufacturing can make it a cost-effective alternative to high strength carbon steel and other stainless steel grades.

The Stainless Steel 304 Round Bar, as the name suggests is made up of 304 grade stainless steel material. It has around 18% chromium and 8% nickel in its chemical composition. The round bar shows high resistance to corrosion and enhanced strength properties. The material is quite strong with around 515 Mpa min tensile strength and min yield strength of 205 MPa.

F55 is the common industry name for UNS S32760 stainless steel. Industry uses ASTM A276 F55 Duplex Round Bar because of its high mechanical strength and resistance to pitting and crevice corrosion. It is available in thicknesses from 3 to 12 mm and in ISO tolerance classes h11, h11-DIN 1013. It is a ductile product and can therefore be used in railway engines and passenger cars.

Stainless steel forged bars are harder and more durable. They are versatile and therefore available for a wide range of services.

Magnetic Response of Stainless Steel
Magnetic response is the attractive force of steel to a magnet. Austenitic grades are generally not magnetic, although a magnetic response can be induced in low austenitic grades by cold working. High nickel grades such as 316 and 310 will remain non-magnetic even when cold worked. All other grades are magnetic.

Our 347 stainless steel bars are extremely resistant to prolonged heat and corrosion, making them ideal for power generation, engines, welded fabrication and other high temperature applications. Also known as UNS S34700 bars, these 347 stainless steel bars have superior creep and stress rupture properties compared to other grades such as 304 stainless steel, with excellent mechanical properties.

Excellent oxidation resistance under mild cycling conditions at 2000¡ãF is characteristic of 310. Due to its high chromium and moderate nickel content, 310 has good resistance to sulfidation and other forms of hot corrosion. 310 is widely used in moderate carburizing atmospheres, such as petrochemical environments.

The high strength and corrosion resistance of AL6XN alloys make them a better choice than traditional duplex stainless steels and a cost-effective alternative to more expensive nickel-based alloys, which offer excellent formability, weldability, strength and Corrosion resistance.

ASTM A276 316 Round Bars can clearly say that rebar is one of the core components of any manufacturing industry or any industry that relies on machinery. Widely used in automotive, textile, manufacturing, construction, cement, shipbuilding, paper and pulp, defense, heavy earthmoving equipment or aerospace.