316 material iso 4144 standard bsp thread stainless steel pipe fittings tees

Alloy Steel Weld Fittings is a pipe attachment detail in which a pipe is inserted into a recessed area of a Valve, fitting or flange. It is mainly used small pipe diameters generally for piping whose nominal diameter is NPS 2 or smaller. Its tensile strength of is between 758-1882 MPa which is higher than the tensile strength of stainless steel.

We warmly welcome our regular and new clients to join us for ASTM Seamless Tee B366 (WP20CB, UNS N08020, Alloy20).

The 317L (00Cr19Ni13Mo3, UNS S31726) alloy is a molybdenum-based austenitic stainless steel. It is more resistant to chemical corrosion than conventional chromium-nickel austenitic stainless steels such as 304 alloy. In addition, compared with conventional stainless steel, 317L alloy has higher ductility, stress corrosion resistance, compressive strength and high temperature resistance. It is a low carbon grade or L grade, which is resistant to sensitization during welding and heat treatment.
Compared with 316L, 317L steel has good seawater resistance and SCC resistance, and is used in chemical ships, chemical products Reactor and other chemical equipment requiring high corrosion resistance.

Inconel 601 has good resistance to stress corrosion cracking. Due to the control of carbon content and grain size, 601 has high creep rupture strength, so it is recommended to use 601 in the field above 500 ¡ãC.

In addition to providing resistance to intergranular corrosion, 317L stainless steel pipe fittings offer higher creep, rupture stress and higher tensile strength, even at elevated temperatures, compared to conventional stainless steel grades. The lower carbon content in fittings produced from this stainless grade is why the alloy resists sensitization during practices involving heat, such as welding and other thermal processes.

Inconel 625 Pipe Fittings are strong and are used in high corrosive applications that need stronger pipes. The material is a nickel chromium molybdenum alloy with niobium in the composition for stabilization. It can operate from cryogenic temperatures up to 1093 degrees Celsius. So the fittings are preferable for applications that require high strength, corrosion resistance and high temperature resistance. The Alloy 625 Buttweld Fittings are used with ease of welding and this is the most used type of fittings. The Inconel UNS N06625 Pipe Elbow is used to turn the pipe away by an angle, usually 45 degrees or 90 degrees. The ANSI B16.9 ASTM B366 625 Inconel Monel Tee can range from ? inches to 48 inches in nominal bore size and it branches a pipe into two.

Sanitary pipe fittings AISI304, AISI304L, AISI316, AISI316L, its standard is DIN/SMS/3A/ISO/IDF, pipeline flow control: DN10-DN200&1 /4″”-8″, it is used in stainless steel pipe system, its working principle It can be welded on the pipeline to adjust the flow in the pipeline. Its medium includes beer, dairy products, beverages and pharmaceuticals.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Typical industrial fields of SUS 316 butt welded pipe fittings are brewing, chemical industry, dairy products, food processing, marine equipment, petrochemical, pharmaceutical, etc. Typical product applications for these ASME SA182 SS 316 fittings are condensers, heat exchangers, filters, pressure vessels, valves, etc.

These Stainless Steel 304/ 304L Fittings/Fittings feature exceptional quality finishing and pressure for long life, high pressure and zero defects. We manufacture stainless steel 304/ 304L pipe fittings for end users such as marine engineering, chemical processing, hydrocarbon processing, heat exchangers, valves and pumps. And ship worldwide.

These curved products are used in the dairy, food, pharmaceutical, biotechnology and other industries for condensers, heat exchangers, process lines and product transport. We specialize in sanitary certified 316L stainless steel custom swept elbow production and provide mill test reports, our long radius elbows can provide sweeps up to 180 degrees.

They can be processed by cold working techniques and their austenitic Inconel structure exhibits robustness at low temperatures. We provide easy-to-manufacture DIN 1.4436 SS seamless pipe fittings for third-party inspection services for the sugar, paper, textile, dairy, power generation and other industries. We also offer a variety of Stainless Steel ASTM A403 WP316 Fittings such as SS WP316 Tee, WP316 SS End Cap, SS 316 Reducer, SS 316 Cross, SS 316 Elbow, SS 316 Stub End, etc.

Stainless steel reducer fittings are similar to couplings, but they can be detached and attached to the pipe and then screwed back to connect them. 316 stainless steel pipe fittings are used in the water pipeline, natural gas, manufacturing and nuclear power plant industries.

317L offers higher creep, stress-to-rupture, and tensile strength at elevated temperatures than conventional stainless steels. It is a low carbon grade which provides resistance to sensitization during welding and other thermal processes.

Stainless steel pipe fitting is part that connect pipe to pipe, its purpose to connect, control and change the direction, split, sealed, support various parts and components in pipeline system, selecting and preparing proper pipe fitting to joint together, there are various types, sizes, grades & specifications to meet specific requirement.

ASTM A815 specification covers two general classes, WP and CR, of wrought ferritic, ferritic/austenitic, and martensitic stainless steel fittings of seamless and welded construction.

These salts may develop when hydrochloric acid comes in contact with iron and copper. Therefore, if this alloy is used in conjunction with iron or copper piping in a system containing hydrochloric acid, the presence of these salts could cause the alloy to fail prematurely.

Grade 316 pipe bend also has given excellent service in potable water. Pitting and crevice corrosion may occur in waters with higher chloride content, and 2000 ppm is accepted as the upper limit. The higher molybdenum content of 316 make it significantly more corrosion resistant than grade 304.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Hastelloy X is a nickel-based superalloy ideal for gas turbine engine, aircraft, industrial furnace, and chemical processing applications.

From the perspective of composition, the high nickel content of INCONEL 600 alloy makes the alloy resistant to corrosion of many organic and inorganic compounds, and makes it almost immune to chloride ion stress corrosion cracking; chromium imparts resistance to sulfur compounds, and in Provides anti-oxidation conditions in high temperature or corrosive solutions.

Thermodynamically, titanium is a very reactive metal due to its negative redox potential, and it burns in the atmosphere at a temperature lower than its melting point. It can react with chlorine at 550 ?C and can also combine with other halogen gases although it absorbs hydrogen.

These fittings are built with non-toxic, corrosion-resistant materials for use in industries that demand ¡°food-grade¡± cleanliness, ensuring zero contamination of the fluid medium.

A pipe cap, also known as a head, a plug, and a baffle, is a pipe fitting that is welded on the pipe end or installed on the external thread of the pipe end to cover the pipe. It is used to close the pipe, and the function is the same as the pipe plug. Stainless steel caps are made of stainless steel. HT PIPE is a high quality stainless steel pipe cap supplier, manufacturer, exporter, wholesaler, factory and company in China, mainly exporting high quality 304/316 stainless steel threaded pipe caps.

The dual-phase steel S31803/S32205 reducer suppresses deformation and cracking at high temperature, which is superior to ordinary steel parts in the chemical industry that are sensitive to chloride stress corrosion cracking.

It is readily brake or roll formed into a variety of parts for applications in the industrial, architectural, and transportation fields. SS 316 also has outstanding welding characteristics.

Inconel 625 pipe fittings are available in ATSM B366 and ASME SB366 specifications. The tensile strength of Din 2.4856 Welded Buttweld Fittings is 1,35,000 psi 930 MPsand yield strength is 75,000 psi 517 MPa. UNS N06625 Cross are manufactured using push, cast, press, and forge processes. These fittings are available in the price range of Rs. 12,700 to Rs 2 lakh. We are among the leading manufacturers of alloy 625 reducer fittings and provide you the best quality product at an affordable price. Customer satisfaction is our ultimate goal. We assist in choosing the fittings as per the customers’ needs and specifications.

Stainless Steel 316L is an extra-low carbon version of the grade 316.

304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel.When it comes to uses, SS304 can be found in kitchen sinks and other appliances such as toasters and microwave ovens. SS304 is also used to make pressure vessels, wheel covers as well as for building facades.

MONEL K500 retains the excellent corrosion resistant characteristics of 400 and has enhanced strength and hardness after precipitation hardening when compared with 400.