316 stainless steel seamless pipe

Nickel based 800 Incoloy Hexagonal Pipe is known to have a good resistance to corrosion. Specifically speaking, the Incoloy 800 Pipe offers sufficient resistance against both carburization as well as oxidation corrosion.

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

AL6XN is a superaustenitic stainless steel with outstanding resistance to chloride pitting, crevice corrosion and stress corrosion cracking. AL6XN is a 6 moly alloy that was developed for and is used in highly aggressive environments. It has high nickel (24%), molybdenum (6.3%), nitrogen and chromium contents that give it excellent resistance to chloride stress corrosion cracking, chloride pitting, and exceptional general corrosion resistance. AL6XN is primarily used for its improved pitting and crevice corrosion resistance in chlorides. It is a formable and weldable stainless steel.

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

It is able to withstand a wide range of oxidizing and non-oxidizing chemicals, and exhibits outstanding resistance to pitting and crevice attack in the presence of chlorides and other halides.

UNS N08367 also commonly referred to as alloy AL6XN is a low carbon, high purity, nitrogen-bearing “super-austenitic” nickel-molybdenum alloy with excellent resistance to chloride pitting and crevice corrosion.

A789 UNS S31803 and UNS S32205 are two grades of duplex stainless steel that are widely used in various industrial applications. These Duplex S31803 Seamless Pipes are known for their excellent corrosion resistance, high strength, and good weldability. A789 is a specification that covers seamless and welded tubes made from duplex stainless steel.

Nilo / Alloy K W.Nr.: 1.3981
UNS: K94610 ASTM F15
Fixed-expansion glass-encapsulated iron-nickel-cobalt alloys, Kovar alloys, have a linear thermal expansion coefficient similar to that of hard glass within a certain temperature range
For mating sealing with hard glass

Nickel Alloy 400 and Monel 400, also known as UNS N04400, is a ductile nickel-copper-based alloy consisting primarily of two-thirds nickel and one-third copper. Nickel Alloy 400 is known for its resistance to a variety of corrosive conditions, including alkalis (or acids), salt water, hydrofluoric acid, and sulfuric acid. Since Monel 400 or Alloy 400 is a cold worked metal, this alloy has high hardness, stiffness and strength. By cold working ASTM B164 UNS N04400 bar stock, the alloy is subjected to higher levels of mechanical stress, which in turn causes changes in the alloy’s microstructure.

Incoloy 800H Flange We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

Alloy 800 is a nickel-iron-chromium alloy with high strength and excellent resistance to oxidation and corrosion at high temperatures. ASTM B407 UNS N08800 Incoloy 800 W. Nr. 1.4876 Welded Pipe is widely used for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500°F (816°C).

Inconel 718 is a nickel-chromium-based alloy that is commonly used in high-temperature applications such as aerospace and gas turbines. One of the most important factors in the production of ASTM B670 Inconel 718 Sheet is the plate rolling process. There are two main types of Inconel 718 plates available on the market: hot rolled and cold rolled plates.

It demonstrates good resistance to neutral and reducing environments. This alloy creates a tenacious oxide, protective film that does not spall off, but it retains superior oxidation resistance at soaring temperatures.

316L 1.4401 S31603 Stainless Steel Pipe is a highly versatile and durable pipe option commonly used in a wide range of industrial and commercial applications. This SS UNS S31603 pipe is made from high quality 316L stainless steel with excellent resistance to corrosion, oxidation and staining, making it ideal for harsh environments or high stress applications.

SCH40 Monel 400 Pipe is designated as Werkstoff Number 2.4360 and UNS N04400. Alloy 400 Pipe also known as Monel Alloy 400 Pipe, Monel 400 Pipe & Nickel Alloy 400 Pipe.

Inconel 625 Coil is characterized by its excellent resistance to oxidation, high-temperature corrosion and fatigue. ASTM B443 UNS N06625 Inconel Plate is widely used in the aerospace, chemical processing and oil and gas industries due to its superior strength, toughness and durability even in extreme environments.

ASTM A312 TP316 is a standard specification for seamless, straight-seam welded, and heavily cold worked welded austenitic stainless steel pipes used in high-temperature and general corrosive service applications. The 316 Seamless Industrial Steel Pipe is made from a combination of chromium, nickel, and molybdenum, which gives SS 316 Seamless Tube excellent resistance to corrosion and rust.

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

SMO 254 Pipes can withstand high mechanical stress and Alloy 254 SMO Pipe high pressure work in high temperatures and corrosive environments.

ASTM A240 Type 2205 Plate is a duplex stainless steel plate that is used extensively in various industries such as chemical processing, oil and gas exploration, and marine engineering. SA 240 GR 2205 Sheet is made from grade 2205 stainless steel, which is a combination of ferritic and austenitic steel.

Titanium’s density is about 60% that of stainless steel and nickel alloys, this weight saving makes it a popular choice in applications where this is critical such as aerospace.

Common Trade Names: Nickel Alloy 36, Invar 36®, Nilo 6®, Pernifer 6®
Invar 36® is a nickel-iron, low expansion alloy that contains 36% nickel, Invar 36 has a low coefficient of expansion from cryogenic temperatures to about +500°F (260°C).
Invar 36 Tube OD:0.2-6mm, WT: 0.02-2mm

The 316 stainless steel pipe has become an indispensable material for the industrial sector. This alloy of iron and chrome is recognized for its high resistance to corrosion, as well as its durability. 316 stainless steel tubing can be produced in both seamless and welded tubes to meet specific customer needs.

304 Piping Spools are made of 304 Stainless Steel, a common and popular material in many industrial applications that require resistance to corrosion and oxidation. These S30400 Piping Spools are prefabricated using specialized machinery and processes, which ensure that they are highly accurate and reliable.

Nickel-copper-based alloy 400 Monel 2.4360 cold drawn rod is virtually immune to chloride stress-related corrosion cracking when exposed to corrosive media in typical environments. Monel 400 is a copper and nickel based alloy that is popular today due to its high performance. The alloy has excellent acid and alkali resistance. In addition, it has good tensile strength, ductility, excellent thermal conductivity, and can be hardened by cold work. Additionally, it can be used in applications with temperatures ranging from minus to 538 degrees Celsius.

ASME B36.19M is the standard specification for stainless steel pipes, which specifies the dimensions, tolerance, and manufacturing requirements for both welded and seamless pipes.

Inconel 600 round bar is a nickel-based alloy with benign carburization and excellent corrosion resistance at high temperatures. Inconel 600 round bars are effective against drying Cl2 and many other different gases at mild and high temperatures. Alloy 600 bar is a nickel-chromium alloy with good oxidation resistance and resistance to chloride pressure decomposition cracking, high cleanliness water corrosion and acid oxidation at elevated temperatures.

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

While it is a very useful metal, it is cost prohibitive in most applications. Monel 400 costs 5 to 10 times as much as regular nickel or copper.

Forging fittings Carbon content 0.35% maximum and Silicon content 0.35% maximum, no minimum.

NAS NW276 is a Ni Cr Mo alloy with excellent corrosion resistance in both oxidizing and reducing atmospheres. In this alloy, carbide precipitation in the heat affected zone (HAZ) is suppressed and corrosion resistance is improved by reducing the contents of C and Si.

A wide range of industries, shops and systems rely on high-performance flanges, and custom pipe flanges are often critical to getting the job done right.

SB564 UNS N02200 Flange The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

Incoloy 800HT will not become brittle even after prolonged use in the 1200-1600¡ã F range where many stainless steels become brittle. 800HT exhibits excellent cold forming properties typically associated with Nichrome. When cold forming is extensive, the grain size produces a distinct undulating surface known as “orange peel”. Incoloy 800HT can be welded by common techniques used on stainless steel.

Monel K500 is a Nickel-Copper alloy that is precipitation hardenable, due to the additions of Aluminium and Titanium.

MONEL K-500 alloy has corrosion resistance comparable to 400, but has higher mechanical strength and hardness. Has good thermal corrosion resistance and long-term tissue stability. It is mainly used in the manufacture of turbine blades and gas turbine blades with a working temperature below 750¡ãC on aero-engines, and in the manufacture of fasteners and springs on ships; pumps and valve parts on chemical equipment, and scraping on paper-making equipment. Blades etc.

We supply ASTM A182 F11 long butt weld flanges with niobium and titanium added to the mining, construction, rail and aerospace industries for sensitization resistance and maximum strength. We closely monitor market trends and needs to invent new, sustainable and economical products that can be customized. Our products are fully certified and 100% durable.

The carbon form can be iron carbide or Alloy Steel F9 Weld Neck Flanges can be carbide of an alloying component, for example, titanium. The A182 F9 Steel Slip On Flanges are good for use with seamless pipes because the flanges allow for the pipes to slip onto them for precise location for the connection.

Steel bars are one of the core components of any manufacturing
industry or for that matter any industry that relies on machineries.
Thanks to its versatile applications, steel bars find itself in the
epicenter of most of engineering industries, be it automotive, textile,
fabrication, construction, cement, ship building, paper and pulp,
defence, heavy earth moving equipments or aerospace.
The overwhelming popularity of steel bars is owed to the fact that
it is possible to be produced in varying types, shapes, sizes, and
grades of bars to cater the exact technical requirements. Steel
bars generally have the shapes such as flat, round, hexagonal,
square and channel and on most of the occasions, it is the shape
of the bar that defines its application area

After hot working, anneal the tube by heat to 1725 and 1850 for at least half an hour to match the inch thickness observed by water quench. Intergranular corrosion (IGC) in pipe fittings, also known as intergranular corrosion (IGA), is a form of corrosion in which the crystallite boundaries of fabrics are particularly susceptible to corrosion. UNS S30403 fittings can be properly hot formed with forces very similar to those required to pass through austenitic steels.

Alloy B2 pipe bend provides resistance to pure sulfuric acid and a number of non-oxidizing acids.

These flanges are best suited to the high demands imposed by the oil, gas and petrochemical industries

The grade mark consists of the grade symbol “2H” and the manufacturer’s identification mark.

Our stainless steel UNS S31600 reducer price list is very competitive with market prices. Reducers are used to reduce the diameter of pipes. There are eccentric reducers and concentric reducers.

The ASTM A312 TP304 Pipe is used for high pressure and high temperature applications because of the high operating temperature of 870 degrees Celsius and the strength. The minimum yield strength of the SS UNS S30400 ERW Pipe is 205MPa and the minimum tensile strength is 515MPa. The applications include commercial, industrial, domestic and general corrosive services. The ASME SA312 Grade 304 Welded Pipe is one of the most cost effective stainless steel pipes in the market.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Incoloy 800H is a higher carbon version of the alloy 800. The Incoloy 800H Pipe is designed with a superior chemical composition consisting of 30 to 35% of nickel with 19 to 23% of chromium and other constituent alloys.

To be sure, huge numbers of the reactions of Alloy Steel F9 Slip On Flanges meddle with each other, requiring the utilization of process models to help in analysing alternatives, improving contending reactions, outlining productive commercial practices. The specification is for high temperature pressure services. The SA 182 Gr F9 Steel Pipe Flanges come in the size range of ? inches to 48 inches with dimensions varying according to the ASTM, ASME and other international standards.

ASTM A182 F11 Alloy Steel Flanges are used in manufacturing of flanges and fittings and are used in industries where cold temperature is observed and corrosion resistance doesn¡¯t matter much.

Among many applications, products include instrumentation components for the mechanical, chemical, petroleum, watchmaking, food and beverage, and medical industries.

316L can be used in large diameter annealed condition or small cross section cold worked condition.

Compared to chromium-nickel austenitic stainless steels, 316L stainless steel offers higher creep, stress to rupture and tensile strength at elevated temperatures.

SA182 F5 Plate Flange can be used in those environments where there is a presence of mild corrosive compounds. It can also be used in non-corrosive applications as well as in erosive applications at the temperature between ranging between -30oC up to +650oC. ASTM A182 Grade F5 Flanges in conditions characterized by increased levels of carbon dioxide (CO2), hydrogen sulphide (H2S), and as well chlorides (Cl). The highlight of A182 F5 Steel Slip On Flanges are Precise plan, Accurate measurements, Resistant to corrosion, Less costs, pitting and crevice resistance.

Hastelloy Nickel Alloy B2 is a very chemically resistant alloy with high resistance to pitting and stress corrosion cracking in the heat affected zone. In particular, this alloy performs well in harsh environments such as sulfuric acid, hydrogen chloride and phosphoric acid. Alloy B is also known as WNR 2.4617 bolts and we offer these types of alloys in all material grades, gauges and sizes.

Alloy 400 pipe bend and elbow have excellent corrosion resistance together with increased strength and hardness.

ASTM A193 Grade B7 specification covers the requirements for high strength alloy steel bolting materials for high temperature or high pressure service and other special purpose applications. It is a standard specification that defines typical chemical composition, mechanical properties, hardness requirements, preferential heat treatment, product marking, certification, and other requirements for bolted connections used in pressure vessel service, valves, flanges, and fittings. ASTM A193 defines SI (metric) and inch-pound units.

A182-F11 has high thermal strength (¦Äb¡Ý440MPa) and oxidation resistance at high temperature, and has certain resistance to hydrogen corrosion.

The thickness and the inner diameter of the flange will be as per the size of the pipe for which this welding neck flange is being made.

Alloy N10675 is a high corrosion resistant nickel molybdenum Alloy. This alloy is characterized by a high resistance against hydrochloric acid and other reducing media in a wide range of temperature and concentration.

These alloy of flanges primarily noted for good oxidation and heat resistance.