316 stainless steel tube fitting compression connector elbows

We have been a leading manufacturer and supplier of Duplex 2205 Fittings for the past ten years. Our goal is to produce the best product for everyone at the most reasonable price.

A234 WPB Elbow is produced and supplied in the butt welded form. SA234 WPB Elbow usually comes in either of three angles; 22.5, 45 or 90 degrees.

Alloy 825 fittings are manufactured like other nickel-based alloys. This means that the material used to manufacture Incoloy 825 elbows is easily formed and welded by a variety of techniques. For example, according to ASTM B366, the list of forging or forming operations includes hammering, piercing, upsetting, rolling, extrusion, pressing, bending, and fusion welding. In addition to withstanding Incoloy 825 fittings for chemical and product analysis, specified fittings also need to meet chemical requirements. Typical applications for Incoloy 825 fittings include their applications in air pollution control, chemical and petrochemical, food processing, petroleum refining, ore processing, steel pickling and waste processing industries, nuclear industry, and offshore oil and gas production.

This combination makes the material resistant to corrosion and high temperatures up to 889 degrees Celsius. 304 stainless steel butt weld fittings meet standard ASTM A403 and are available in outside diameters from ?” to 48″. For seamless fittings, diameters range from ? to 10 inches.

ASTM A234 WPB Elbow is a standard specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel suitable for for Moderate and High Temperature Service.

We sincerely look forward to providing you with the best quality and most affordable Heat-Resistant Stainless Steel Strips, 321 Stainless Steel Coils, 301 Stainless Steel Coil and bringing the best and fastest economic benefits to your business. Our company is committed to innovation, because we know that only unremitting innovation, the brand can be sustainable development. We may stick on supplying original and good quality parts even a little profit earned. In terms of business innovation, our company shapes the corporate image, implements the brand strategy, establishes the modern corporate culture, and reasonably arranges the network.

C276 Elbow has excellent corrosion resistance to a wide range of concentrated hot acids and reducing environments and can be easily used in hot sulfuric and hydrochloric applications.

Alloy C22 is one of the most corrosion-resistant alloys available, even outperforming C276 and 625. It is resistant to almost all reducing and oxidizing environments, including strong oxidizers, seawater, and organic acids.

Monel K500 pipe bend and elbow are usually used in propeller, pump shafts, pumps, valves used in the manufacture of perchlorethylene, and chlorinated plastics.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

It is not useful in oxidizing acids, such as nitric acid and nitrous.

Our reducers have high strength and corrosion resistance and are suitable for various industries.

Inconel 625 elbows are made from a non-magnetic nickel alloy. It has high toughness and strength. The material is resistant to corrosion and oxidation. Inconel 625 elbows are used for high temperature and high pressure applications.

ASTM A234 is Standard Specification for wrought or forging steel pipe fittings includes carbon and alloy steel material for moderate and high temperature services.

The versatility of INCONEL alloy 600 has led to its use in a variety of applications involving temperatures from cryogenic to above 2000¡ãF (1095¡ãC).

Alloy 400 has corrosion resistance, high strength and good weldability. Monel 400 has amazing mechanical properties at sub-zero temperatures. It has a melting point of 2370-2460¡ãF and is easily used at temperatures up to 1000¡ãF.

304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel.When it comes to uses, SS304 can be found in kitchen sinks and other appliances such as toasters and microwave ovens. SS304 is also used to make pressure vessels, wheel covers as well as for building facades.

C22 is typically provided in the annealed condition with a minimum yield strength of 45 ksi. However, C22 can be cold worked to higher strength levels.

Stainless steel types 1.4401 and 1.4404 are also known as grades 316 and 316L respectively. Grade 316 is an austenitic grade second only to 304 in commercial importance.

We manufacture premium duplex 31803/32205 fittings with many key properties such as high resistance to corrosion fatigue, stress corrosion cracking, especially chloride stress corrosion cracking, erosion, excellent workability and weldability.

MONEL K500 is non-magnetic. MONEL K500 should be annealed when welded and the weldment then stress relieved before aging.

HT PIPE has an excellent production company for designing and developing superior Pipe Fittings SS 316/316L. During the testing and production phases, our expert team examines strictly SS 316/316L buttweld pipe fittings.

For maximum strength alloy 617 (ERNiCrCoMo-1) bare wire or 117 (ENiCrCoMo-1) covered electrodes are suggested.

ASTM A403 is the standard of pipe fittings material,it indicates the materials properties of different kinds of stainless steel,WP304 is one of the steel grade in this standard. 304 a kind of common stainless steel,it is widely used to make for the manufacture of equipment and parts which needs good comprehensive performance,corrosion resistance and formability.

The 317L (00Cr19Ni13Mo3, UNS S31726) alloy is a molybdenum-based austenitic stainless steel. It is more resistant to chemical corrosion than conventional chromium-nickel austenitic stainless steels such as 304 alloy. In addition, compared with conventional stainless steel, 317L alloy has higher ductility, stress corrosion resistance, compressive strength and high temperature resistance. It is a low carbon grade or L grade, which is resistant to sensitization during welding and heat treatment.
Compared with 316L, 317L steel has good seawater resistance and SCC resistance, and is used in chemical ships, chemical products Reactor and other chemical equipment requiring high corrosion resistance.

304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel.When it comes to uses, SS304 can be found in kitchen sinks and other appliances such as toasters and microwave ovens. SS304 is also used to make pressure vessels, wheel covers as well as for building facades.

ASTM A403 WP 316 Elbow covers the standard for wrought austenitic stainless steel fillers. These are used in pressure piping applications. SS 316 45 degree elbows and other 306 pipe fittings shall be performed using a variety of operations such as pressing, piercing, hammering, rolling, bending, upsetting, fusion welding, extrusion, machining, or the combination of two or more of these methods. combination.

Stainless steel pipe fittings are used to connect 2 pipes as they have a pipe fitting at one or both ends. The stainless steel reducing tee has a tensile strength of 515 MPa and a yield strength of 205 MPa.

Generally speaking, carbon steel pipe fittings and flanges are widely used in applications that do not require higher corrosion resistance materials such as stainless steel and nickel alloys. Carbon steel products are easy to corrode and rust when exposed to water.

All kinds of pipe products have DIN, ISO, 3A, SMS, BS, IDF, DS, BPE standard. And pipe fitting: 45¡ã/90¡ã/180¡ãbend series, tee/cross series, concentric(eccentric) series make your pipeline system free connectivity. Each series pipe fittings have weld, clamp, thread and flange four common install ways with your pipe system standard connections.