316L astm b16.9 stainless steel pipe fittings 90 degree elbow

ASME SA 240 UNS S32205 elbows are standard elbows that can be connected to almost any size elbow. These elbows are available in NPS ? to NPS 48 and can change the direction of flow in the pipe. UNS S32205 elbows are stronger than austenitic stainless steels.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

All SA234 WPB Elbow are manufactured in India and produced from strictly European sourced raw material. All ASTM A234 Elbow & Elbow A234 Wpc are manufactured from plate, pressed in two halves with two weld seams.

Monel 400 has excellent resistance to chloride ion stress corrosion cracking.

Regarding ASTM A815 WPS31803 s32750 s32760 904L S31254 254SMO 180deg ELBOW ASME B16.9, duplex stainless steels are a family of stainless steels. These are called duplex (or austenitic-ferritic) grades because their metallurgical structure consists of roughly equal proportions of austenite (face-centered cubic lattice) and ferrite (body-centered cubic lattice) two phase composition. They are designed to provide better corrosion resistance, especially chloride stress corrosion and chloride pitting.

904L Pipe Fittings is stainless steel is a non-stabilized austenitic stainless steel with low carbon content. This high alloy stainless steel is added with copper to improve its resistance to strong reducing acids, such as sulphuric acid. The steel is also resistant to stress corrosion cracking and crevice corrosion. Grade 904L is non-magnetic, and offers excellent formability, toughness and weldability.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Stainless steel pipe fittings are used to connect 2 pipes as they have a pipe fitting at one or both ends. The stainless steel reducing tee has a tensile strength of 515 MPa and a yield strength of 205 MPa.

A234 WP91 is one of the steel grade in ASTM A234 standard.W means weldable,P means pressure,91 is grade 91.the starting material is ASTM A335 Gr P91 Seamless pipes,widely used for POWER PLANT FABRICATION,Chemical & Fertilizers, Power Generation and Nuclear Industries.

Stainless steel tees, carbon steel tees and special grade tees are widely supplied by us to many industries such as power generation, petrochemical, shipbuilding, paper manufacturing, chemical, pharmaceutical, and fabrication.

Strengthening of super alloy Hastelloy B2 pipe bend is performed by solid-solution hardening, work hardening, and precipitation hardening methods.

Duplex stainless steels are a family of stainless steels. These are called duplex (or austenitic-ferritic) grades because their metallurgical structure consists of two phases, austenite (face-centered cubic lattice) and ferrite (body centered cubic lattice) in roughly equal proportions. They are designed to provide better corrosion resistance, particularly chloride stress corrosion and chloride pitting corrosion, and higher strength than standard austenitic stainless steels such as Type 304 or 316.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

The Nickel Alloy 800H is known for its excellent cold forming characteristics.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Monel K500 pipe bend and elbow are usually used in propeller, pump shafts, pumps, valves used in the manufacture of perchlorethylene, and chlorinated plastics.

We also accept all orders of CS Elbow A234 WPB up to and including 90 degree to suit your requirements.

Stainless Steel Buttweld Fittings used in pressure piping frameworks of direct and high-temperature administrators.

Monel 400 Butt Weld Reducers are resistant to aggressive solvents, acids and bases, and seawater, are highly robust at high temperatures, and are also operable for use in many marine engineering applications.

These pipe fittings include Tee, Concentric reducer, eccentric Reducer, 5D/6D bend, elbow, unions, plugs, cross tee, pipe cap and nipple, ect for use in pressure piping and in pressure vessel fabrication for service at moderate and elevated temperatures.

UNS S32205 Pipe Fittings are applicable in chemical processing, pulp and paper production, marine and other high chloride environments, Liquor tanks and paper machines, Transport and storage, Oil and gas exploration and processing equipments. Oshwin Overseas has huge inventory of Duplex UNS S31803 Pipe Fittings in different standards and different dimensions, thickness and sizes. Oshwin Overseas are proud 2205 Duplex UNS S32205 Stainless Steel Pipe Fittings Suppliers in following forms and shapes.

Monel 400 is a nickel-copper alloy (about 67% Ni ¨C 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions.?Butt-weld and forged fittings are available.Excellent corrosion resistance in many acidic and alkaline environments Especially suitable for reducing conditions. Good ductility and thermal conductivity Ideal for seawater applications.

SA234 WPB Elbow is made up of carbon steel or alloy steel.

The UNS N10276 Fittings have high tensile strength even at elevated temperatures and demonstrate good performance under high pressure. The tensile strength of the ASTM B366 UNS N10276 Stub End is about 105.4 Ksi.The ASTM B366 WPHC276 End Cap has great fabrication properties. B366 WPHC276 is easily fabricated by cold working. Although the Grade WPHC276 Reducer can be hot worked, the process needs to be carried out adhering to certain parameters

INCOLOY Alloy 800 (UNS N08800/W. Nr. 1.4876) is a widely used material for the manufacture of equipment requiring corrosion resistance, heat resistance, strength and stability, operating temperatures up to 1500¡ãF (816¡ãC) ).

Alloy 20 (Alloy 20) is an iron-based austenitic alloy developed to resist sulfuric acid corrosion. It has excellent resistance to sulfuric acid corrosion; it has strong resistance to phosphoric acid, nitric acid and chloride environments, chloride stress corrosion, pitting corrosion and crack corrosion. Therefore, alloy 20 has the name of anti-corrosion alloy; it has a wide range of applications: such as: chemical, food, medicine, power production and plastics industries will use it. For resistance to pitting corrosion and chloride corrosion, stress corrosion cracking problems, etc., alloy 20 is often used.

Inconel 718 elbows are commonly used in gas turbine engine parts, wellhead completions and blowout preventers (BOPs).

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

There are 5 most common ASTM A234 WPB Elbow are in mainly in demand, the 45¡ã, 90¡ã and 180¡ã elbows, all three in the “long radius” version, and in addition the 90¡ã and 180¡ã elbows both in the “short radius” version.