316ti astm a276 square flat 410 1.4021 304 – 316l – 201 stainless steel round bar

Stainless steel round bars are also sometimes called bright bars or solid bars. Since it is made of stainless steel containing chromium, this product has excellent corrosion resistance. Those grades with higher alloy content have the added benefit of being highly resistant to acid, chlorine and alkaline solutions. These properties, combined with inherent strength and longevity, have helped make stainless steel round bars popular in industries such as transportation, construction, automotive, and petrochemicals.

904l stainless steel round bar is an austenitic grade alloy. The added molybdenum content in stainless steel 904L square bar alloy gives it excellent resistance to localized corrosion such as pitting and crevice corrosion if compared to alloy grade 316l.

Stainless steel black bars are manufactured through a forging process. Here, the steel passes through several rolls and raw materials such as billets and blooms are heated to around 1200 degrees Celsius. It exceeds the recrystallization temperature of steel.

The 316L Round Bars are made up of the low carbon version of the 316 grade stainless steel alloy. It has a maximum carbon content of only 0.03%, whereas it is 0.08% for the 316 grade ss. The 316L ss round bars offers better corrosion resistance and is more suitable for high temperature applications.

The A479 specification contains tensile strength, yield strength, elongation, and hardness values for many different heat treatments. Special instructions for heat treatment and additional corrosion testing of austenitic stainless steels are also included in the specification. The grades of A479 steel are also defined by their chemical composition.

Round bars can be manufactured using cold-finishing or hot-finishing processes, and are often available in many different grades and diameters, making them suitable for many different applications. Grade 303 – This is generally considered the best grade for machining, so is naturally popular in projects that require a lot of machining.

304 Stainless Steel Round Bar, the most widely used stainless and heat resistant steel 304 has good corrosion resistance to many chemical corrosive agents as well as industrial environments.

Our stainless steel round bar stock ranges from 1/8¡± to 24¡± diameter. We are the industry leader in long bar stock ranging from 20′-24′ R/L. This means we are able to supply stainless steel for projects requiring lengths longer than the industry standard 12′. The long length also provides flexibility in part length, often leaving excess scrap on the standard 12′ length.

Grade 316 is known for its toughness and excellent corrosion resistance. This alloy has proven useful in many metal engineering projects, especially in exterior and coastal applications and where welding is required. Machining at level 316 is a little more difficult, but can be done successfully with the right tools.

Super duplex stainless steel 2507 round bars are used in a wide variety of industrial applications.

ASTM A638 Grade 660 alloy is a precipitation hardening stainless steel suitable for high temperature applications. This grade is suitable for applications requiring good corrosion resistance and high strength at temperatures up to 700°C. It can be used for lower stress applications at higher temperatures.

Applications and typical uses of stainless steel round bars are: Offshore (foils, helideck platforms, etc.), food industry, pulp and paper industry, aerospace (turbine blades, etc.), mechanical parts, nuclear waste barrels, valve stems, balls, liners sleeves, valve seats, etc.

The advantages of stainless steel bar include long material life, corrosion resistance, attractive appearance, ease of manufacture, impact resistance and long-term value. Stainless steel is one of the most widely used metals in modern construction.
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

Magnetic Response of Stainless Steel
Magnetic response is the attractive force of steel to a magnet. Austenitic grades are generally not magnetic, although a magnetic response can be induced in low austenitic grades by cold working. High nickel grades such as 316 and 310 will remain non-magnetic even when cold worked. All other grades are magnetic.

The stainless steel rectangular bar 304 can be hot rolled or cold drawn. Stainless Steel Rectangular Bars are ideal for structural applications where strength, toughness and excellent corrosion resistance are required. It also maintains excellent load-bearing properties, high corrosion resistance, excellent durability, high strength-to-weight ratio, good thermal and electrical conductivity, and more.

Stainless steel round bars are available in three grades. 304 is the most common grade with easy weldability, good formability and corrosion resistance. Grade 316 offers excellent corrosion resistance, making it ideal for harsh environments such as salt water or heavy industrial areas. Like grade 304, it is also easy to weld, but more difficult to machine. Finally, grade 303 is easier to machine, drill and cut than other grades. However, it is not as suitable for welding as grades 304 and 316.

Type 347 stainless steel has slightly improved corrosion resistance in strongly oxidizing environments than Type 321 stainless steel. Type 347 is stabilized with columbium and is more suitable for aqueous and low temperature environments due to its good resistance to intergranular corrosion. Both 347 and 321 have good resistance to polythionate stress corrosion cracking encountered in refineries. The high temperature oxidation resistance of 347 is similar to that of 304 stainless steel. For 1500¡ãF.
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

Stainless steel rods are popular for their corrosion resistance and are widely used in the construction of building foundations, bridges and marine environments. 304/304L Stainless Steel Round, an economical grade stainless steel ideal for all applications requiring strength and superior corrosion resistance.

A sharp tool is required, and the correct speed and feed are very important – taking care to ensure the cut is deep enough to clear the surface is a must, as excessive contact can harden the material.

Because of this resistance, some of the applications and uses of stainless steel bars are in machining, fasteners, grills and construction. The 304, 304L, and 304H may be considered to perform uniformly in most corrosive environments. Plain round bar is commonly used to separate mesh in concrete slabs and is used in a range of commercial and infrastructure applications.

304 Stainless Steel Rod Applications: As the most widely used of all stainless steel grades, 304 is most prominently found in industrial applications and kitchen equipment.

A479 is a specification for bars and rods produced in several grades of austenitic, ferritic, duplex or simply austenitic-ferritic and martensitic stainless steels. Since this designated stainless steel A479 round bar can be produced in any of the above grades, it can be heat treated differently.

310 Stainless Steel Rods at Competitive or Lowest Prices – At HT PIPE, we are committed to providing our customers with the lowest possible prices for 310 Stainless Steel rods. We can also offer quantity discounts as the quantity increases.

Steel bars are one of the core components of any manufacturing
industry or for that matter any industry that relies on machineries.
Thanks to its versatile applications, steel bars find itself in the
epicenter of most of engineering industries, be it automotive, textile,
fabrication, construction, cement, ship building, paper and pulp,
defence, heavy earth moving equipments or aerospace.
The overwhelming popularity of steel bars is owed to the fact that
it is possible to be produced in varying types, shapes, sizes, and
grades of bars to cater the exact technical requirements. Steel
bars generally have the shapes such as flat, round, hexagonal,
square and channel and on most of the occasions, it is the shape
of the bar that defines its application area

A sharp tool is required, and the correct speed and feed are very important – taking care to ensure the cut is deep enough to clear the surface is a must, as excessive contact can harden the material.

The ASTM A479 specification covers hot-rolled and cold-rolled stainless steel bar, including round, square, and hexagonal, as well as hot-rolled or extruded shapes for boiler and pressure vessel construction, such as angles, tees, and channels. Four grades of stainless steel are available, including austenitic, austenitic-ferritic, ferritic and martensitic grades. Mechanical properties, such as tensile strength, yield strength, elongation, and hardness, shall be determined for specimens subjected to normalized, tempered, annealed, and quenched conditions.

Super Duplex UNS S32760 Bar High resistance to pitting and chloride ions. The bars are heat treated at 1100 degrees Celsius and then water quenched. They have different standards like ASTM A479 UNS S32760 Hex Bar with different tolerance classes like H8 – H12, K10 to K12. These bars are used in the marine, food and surgical industries.

Stainless steel round bars 3mm to 90mm cold drawn and polished, larger diameter peeled and polished. Stainless steel round bars are ordered according to ISO H9 (H tolerance is negative). European Steel Stock Stainless Steel Round Bars are available in the following grades 303, 304, 316, 431 EN 57, 904L Other grades available on request. The length is random and varies between 4 and 6 meters. We offer a full cut service so we can provide the exact size and length you need.

ASTM A276 316 Round Bars can clearly say that rebar is one of the core components of any manufacturing industry or any industry that relies on machinery. Widely used in automotive, textile, manufacturing, construction, cement, shipbuilding, paper and pulp, defense, heavy earthmoving equipment or aerospace.

Grade 304 – This is a standard “18/8” stainless steel with excellent forming and welding characteristics. 304L is a low carbon version of 304 and does not require post weld annealing. This makes it ideal for heavy components.