321 347 904L S31254 310S Astm A182 Weldneck 1 12 Rf So 150# Blind Ff Flange

ASME B36.19M is the standard specification for stainless steel pipes, which specifies the dimensions, tolerance, and manufacturing requirements for both welded and seamless pipes.

Flange is the parts which connects two pipe ends, flange connection is defined by the flange, gasket and bolt three are connected as a group of combined sealing structure of the detachable connection. The gasket is added between the two flanges and then fastened by bolts. Different pressure flange, thickness is different, and the bolts they use are different, when pump and valve connect with pipe, the parts of the equipment are also made of the corresponding flange shape, also known as flange connection, usually closured bolted connection parts are also known as flanges, such as the connection of ventilation pipe, this kind of parts can be called “flange type part”, but this connection is only part of a device, such as the connection between flange and water pump, it’s not inapposite to call water pump as flange type parts,but relative small valve,it can be called as flange type parts .

Although molybdenum is a good element, excessive use of it may reduce the creep ductility of Gr F11 plate flanges. Graphitization and decomposition of iron carbide may occur when the temperature exceeds 500 degrees Celsius. Chromium has been added to SA A182 F11 alloy steel CL.2 forged pipe flanges to prevent creep ductility reduction and graphitization. In addition, the added chromium also provides oxidation resistance.

AL-6XN alloy has a long history in food, beverage, dairy, personal and home care, and biotech and pharmaceutical applications.

Stainless steel flange simplified as SS flange, it refers to the flanges that made of stainless steel. Common material standards and Grades are ASTM A182 Grade F304/L and F316/L, with pressure ratings from Class 150, 300, 600 etc and to 2500.

SAE 304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel. It is less electrically and thermally conductive than carbon steel. It is magnetic, but less magnetic than steel. It has a higher corrosion resistance than regular steel and is widely used because of the ease in which it is formed into various shapes.[1]

In most cases, the corrosion resistance of our stainless steel 316 butt weld flanges is about the same in most corrosive environments.

We provide flanges for connecting valves, pipes and other equipment to avoid leakage. Duplex steel F60 flanges are highly resistant to sulfide corrosion, crevice cracking, stress corrosion cracking and chloride attack. Excellent mechanical strength and toughness allow these duplex flanges to be maintained in harsh environments.

The low carbon content of 316L provides an effective solution to a common engineering problem with 316 stainless steel. This small change in your application can have a big impact on your operating costs and quality assurance parameters as a business organization. Unlike other types of steel such as 304 and 306, the 316l stainless steel alloy can be used in a variety of applications where high corrosion resistance is required. For example, specialists in the chemical and pharmaceutical industries use it to make surgical tools and medical implants.

Our UNS S31700 SS Orifice Flanges are molybdenum bearing, that combat pitting and act as leak-proof seals to pipe endings in the breweries, water and sugar industry. Our Stainless Steel 317 Slip-On Flanges with the Chromium-Nickel-Molybdenum combination imparting it reliable sturdiness at high temperatures and offer an unmatched degree of fabricability and formability, thus securing themselves as the top choice in the aerospace industry and at Steel Plants.

The flanges are made in different face types. The face types range as flat face, raised face and ring type joint. The SA182 F55 RTJ Flange has a ring type joint. The flange is fixed in two halves.

SMO 254 Flanges have great connectivity to pipes and have a long life in the refining industry for low to high-pressure applications.

A flange is a ring of steel (forged, cut from plate, or rolled) designed to connect sections of pipe, or to join pipe to a pressure vessel, valve, pump or other integral flanged assembly. Flanges are joined to each other by bolts, and to the piping system by welding or threading (or loose when stub ends are used). Stainless steel flange simplified as SS flange, it refers to the flanges that made of stainless steel. Common material standards and Grades are ASTM A182 Grade F304/L and F316/L, with pressure ratings from Class 150, 300, 600 etc and to 2500. It used in more industries than carbon steel as stainless steel has better resistant performances on corrosion environment and always provides with a good appearance.

As there are many mechanical properties of stainless steel 304 plate flanges, but some of them are discussed, such as density, melting point, tensile strength, etc.

Commonly used to blank off pipelines, valves, and pumps, or as an inspection cover, this GRAINGER APPROVED blind flange allows you to bolt 2 flanges together with a gasket to form a tight seal that still eases access to the piping system. This model is sometimes referred to as ¡°blanking flange¡± and is for use with air, water, oil, natural gas, or steam.

A flange is a ring of steel (forged, cut from plate, or rolled) designed to connect sections of pipe, or to join pipe to a pressure vessel, valve, pump or other integral flanged assembly. Flanges are joined to each other by bolts, and to the piping system by welding or threading (or loose when stub ends are used). Stainless steel flange simplified as SS flange, it refers to the flanges that made of stainless steel. Common material standards and Grades are ASTM A182 Grade F304/L and F316/L, with pressure ratings from Class 150, 300, 600 etc and to 2500. It used in more industries than carbon steel as stainless steel has better resistant performances on corrosion environment and always provides with a good appearance.

ASTM A182 SS 321H Slip On Flanges
Featuring 304 stainless steel for very good corrosion resistance, this GRAINGER APPROVED weld neck flange can be attached to a system via a circumferential weld at the neck. The welded area can be easily examined by radiography. Matched pipe and flange bore reduces turbulence and erosion inside the pipeline. Flange is excellent for use in your critical applications and is ideal for use with air, water, oil, natural gas, and steam.

UNS N08926 forging rings, UNS N08926 forging spindles, UNS N08926 forging bars,UNS N08926 forging gears that are used in power transmission, turbine,gas compressor,gear boxes and so on.

Incoloy 925 flange also contains additional levels of titanium and aluminum compared to 825.

A flange is a ring of steel (forged, cut from plate, or rolled) designed to connect sections of pipe, or to join pipe to a pressure vessel, valve, pump or other integral flanged assembly. Flanges are joined to each other by bolts, and to the piping system by welding or threading (or loose when stub ends are used). Stainless steel flange simplified as SS flange, it refers to the flanges that made of stainless steel. Common material standards and Grades are ASTM A182 Grade F304/L and F316/L, with pressure ratings from Class 150, 300, 600 etc and to 2500. It used in more industries than carbon steel as stainless steel has better resistant performances on corrosion environment and always provides with a good appearance.

The flanges are used in high temperature services to connect pipes and piping materials together.

We offer different kinds of 304 SS flanges, such as SS 304 Reducer Flange, SS 304 Slip Flange, SS 304 Nebo Flange, SS 304 Orifice Flange, Stainless Steel 304 Loose Flange, SS 304 Lap Method flange and SS 304 blind flange. Our thorough quality checks help us build efficient products that provide excellent usability in different usage environments.

Stainless steel 304 flanges are widely used in petrochemical, oil and gas, power generation, bulk liquid transportation, chemical, pharmaceutical, pulp and paper, textile and other industries.

SAE 304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel. It is less electrically and thermally conductive than carbon steel. It is magnetic, but less magnetic than steel. It has a higher corrosion resistance than regular steel and is widely used because of the ease in which it is formed into various shapes.[1]

hough lower in tensile strength than SS 304, this SS UNS S30403 Slip On Flanges is strengthened through hardening by cold working techniques. We possess the skills and the workforce to impart and offer various businesses, large, moderate and small, SS DIN 1.4306 Forged Flanges which are supreme in quality

Normalizing is a heat treatment process used to make metals more ductile and ductile after a thermal or mechanical hardening process. Normalizing involves heating the material to a high temperature and then exposing it to room temperature air after heating, allowing it to cool to room temperature. This heating and slow cooling alters the metal’s microstructure, reducing its hardness and increasing its ductility.

ASTM A182 F316L is a forging material specification for 316L grade stainless steel and is used for manufacturing bare forgings or forged and machined products for applications involving high temperature service.

SS 321 Slip On Flange
Featuring 304 stainless steel for very good corrosion resistance, this GRAINGER APPROVED weld neck flange can be attached to a system via a circumferential weld at the neck. The welded area can be easily examined by radiography. Matched pipe and flange bore reduces turbulence and erosion inside the pipeline. Flange is excellent for use in your critical applications and is ideal for use with air, water, oil, natural gas, and steam.

Stainless Steel 304 316 317 Slip On Flange
Featuring 304 stainless steel for very good corrosion resistance, this GRAINGER APPROVED weld neck flange can be attached to a system via a circumferential weld at the neck. The welded area can be easily examined by radiography. Matched pipe and flange bore reduces turbulence and erosion inside the pipeline. Flange is excellent for use in your critical applications and is ideal for use with air, water, oil, natural gas, and steam.

The flange itself is not welded, but the short pipe end is inserted/slid over the flange and welded to the pipe. This arrangement facilitates flange alignment where misalignment can be an issue. In a lap flange, the flange itself is not in contact with the fluid. The stub end is the part that is welded to the pipe and is in contact with the fluid.

It is also called a butt weld flange because the flange neck has a reduced diameter and can be welded to smaller diameter pipes.

Stainless Steel 304 Spectacle Blind Flange, also known as a SS 304 Figure-8 Blind Flange or a paddle blind, is a special type of flange used in piping systems. SS 304 Spectacle Blind Flange is primarily used for isolating sections of a pipeline or for temporary closure during maintenance or inspection activities.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.