36 inch astm a860 wphy70 butt weld elbows 3d nickel alloy pipe fitting Inconel 600 601 625 718

Duplex Elbow Fittings – Duplex steel elbows are installed between two lengths of pipe or tubing, allowing a 180¡ã, 90¡ã or 45¡ã change in direction. End machining is used for butt welding when the two ends are different in size, called a reducer or a reducer elbow. Fitting elbows are available as 1D, 1.5D, 2D, 3D, 5D, 6D, 8D, 10D radius 180¡ã elbows, 90¡ã elbows or 45¡ã elbows as short and long radius elbows.

The higher strength results from deliberate control of the carbon, aluminum, and titanium contents in conjunction with a high-temperature anneal.

A234 WPB SCH 80 Elbow is a standardization that conforms to schedule 80. ASTM A234 WPB Elbow could also be threaded or machined; sometimes it is also socketed.

ASTM A860 WPHY 52 Fittings are made up of a high yield carbon steel with carbon, manganese, sulfur, phosphorus, silicon, nickel, chromium, molybdenum, copper, titanium, vanadium and cobalt in the composition.The increased durability ensures a long work life, therefore proving that the A860 WPHY 52 elbow is a cost saving solution.

30 deg long radius 304 316 321 stainless steel pipe fittings weld S30400 elbow for incredible corrosion resistance in chemical environments containing phosphoric, nitric, sulphuric and chloride acids. However, it is significantly resistant to warm sulfuric acid. The increased power of the tube may also require better forming pressures.

AL-6XNalloy (UNS N08367) is a low carbon, high purity, nitrogen-bearing “super-austenitic” stainless alloy. The AL-6XN alloy was designed to be a seawater resistant material and has since been demonstrated to be resistant to a broad range of very corrosive environments. The high strength and corrosion resistance of the AL6XN alloy make it a better choice than the conventional duplex stainless steels and a cost effective alternative to more expensive nickel-base alloys where excellent formability, weldability, strength and corrosion resistance are essential.

The manufacturing process of pipe fittings includes forging and forming operations. As well as pressing, hammering, piercing, extrusion, upsetting, rolling, bending, fusion welding and machining. Or a combination of two or more of these operations.

All ASTM A234 Elbow & Elbow A234 Wpc are manufactured from plate, pressed in two halves with two weld seams. We offer 100% radiography on all welds as standard.

The molybdenum gives SS 316 better overall corrosion resistant properties than Stainless Steel 304, particularly higher resistance to pitting and crevice corrosion in chloride environments.

Our Stainless Steel 904L Buttweld Fittings (WNR 1.4539) are used in Power plants using fossil or nuclear fuels, and also in geothermal energy for harnessing heat from the earth. SS 904L Welded Tube Fittings are used for the cold chain to keep produce fresh, drinks, and frozen foods at a set temperature. SS WERKSTOFF NR. 1.4539 Buttweld Pipe Fittings are used in industries such as Off-Shore Oil Drilling Companies, Power Generation, Petrochemicals, Gas Processing, Specialty Chemicals, Pharmaceuticals, Pharmaceutical Equipment, Chemical Equipment, Sea Water Equipment, Heat Exchangers, Condensers, Pulp and Paper Industry.

Pipe Fittings are available in various forms like Elbow Fittings, Return Bend Fittings, Cross Pipe Fittings, Cap Pipe Fittings, Tee Pipe Fittings, Stub End Pipe Fittings, Reducer Pipe Fittings, and Coupling Pipe Fittings. Each of these forms has their own role to play as pipe fittings but with common intent of enhancing the pipe utility in various conditions.

Monel K500 pipe bend and elbow are exceptionally good dimensional stability.

Monel K500 alloy has the same corrosion resistance as Monel 400 alloy.

Hastelloy C2000 pipe fittings is a nickel-chromium-molybdenum alloy. It is most commonly available in wrought forms at the mill level. Hastelloy C2000 can be used in applications requiring high metallurgical stability in reducing or oxidizing atmosphere. It is also sed in chemical process equipment applications.

MONEL K500 retains the excellent corrosion resistant characteristics of 400 and has enhanced strength and hardness after precipitation hardening when compared with 400.

This nickel-copper alloy is precipitation hardenable due to the addition of aluminum and titanium. It combines the corrosion resistance of Monel 400 with the added benefits of superior strength and hardness (derived from its age-hardenability). Monel K-500 is also known for its ease of fabrication compared to other superalloys, and the fact that it is essentially nonmagnetic even at low temperatures.

Our ASME SA403M SS 304 caps are highly demanded by the printing and textile industries for their versatility and excellent solderability.

HT PIPE has an excellent production company for designing and developing superior Pipe Fittings SS 316/316L. During the testing and production phases, our expert team examines strictly SS 316/316L buttweld pipe fittings.

We never compromise on the quality and quantity standards and specifications to manufacture these duplex steel UNS S31803 butt welded pipe fittings. We are mass producing these duplex accessories using highly advanced technology and tools. Help our clients in emergencies or any emergency.

Inconel 718 Reducer is a nickel-based superalloy ideal for applications requiring high strength in temperatures ranging from cryogenics to 1400 degrees Fahrenheit.

Regarding ASTM A815 WPS31803 s32750 s32760 904L S31254 254SMO 180deg ELBOW ASME B16.9, duplex stainless steels are a family of stainless steels. These are called duplex (or austenitic-ferritic) grades because their metallurgical structure consists of roughly equal proportions of austenite (face-centered cubic lattice) and ferrite (body-centered cubic lattice) two phase composition. They are designed to provide better corrosion resistance, especially chloride stress corrosion and chloride pitting.

S31803 is the Unified Numbering System (UNS) designation for the original duplex stainless steel. The UNS system was created by multiple trade groups in the 1970s to reduce confusion when the same alloy was called different things, and vice versa. Each metal is represented by a letter followed by five numbers, where the letter represents the metal series, i.e. S for stainless steel.

For paper mill applications requiring lower alloy grades that do not have sufficient corrosion resistance. Based on a 22% chromium content, they have a combined austenitic:ferritic microstructure that provides greater strength, corrosion resistance and cost-effectiveness.

The UNS S31803 (ASTM F51) specification has been largely superseded by UNS S32205 (1.4462, ASTM F60). This reflects their desire to maximize the alloy’s corrosion properties, thanks to the development of the AOD steelmaking process, which allows for tighter control of composition. In addition, it allows to influence the nitrogen addition level rather than just being present as a background element. Therefore, the highest performing duplex grades seek to maximize the content of chromium (Cr), molybdenum (Mo) and nitrogen (N).

Inconel 625 Pipe Fittings are strong and are used in high corrosive applications that need stronger pipes. The material is a nickel chromium molybdenum alloy with niobium in the composition for stabilization. It can operate from cryogenic temperatures up to 1093 degrees Celsius. So the fittings are preferable for applications that require high strength, corrosion resistance and high temperature resistance. The Alloy 625 Buttweld Fittings are used with ease of welding and this is the most used type of fittings. The Inconel UNS N06625 Pipe Elbow is used to turn the pipe away by an angle, usually 45 degrees or 90 degrees. The ANSI B16.9 ASTM B366 625 Inconel Monel Tee can range from ? inches to 48 inches in nominal bore size and it branches a pipe into two.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

We also offer Super Duplex S32760 Butt Weld Fittings and Super Duplex S32750 Fittings according to customer specific requirements. We also offer various shapes such as Super Duplex S32760 Stub Ends, Super Duplex S32750 Coupling Reducers, Super Duplex S32760 Elbows, Super Duplex S32750 Tube End Caps, S32760 Super Duplex Three links, etc.

Stainless steel 304 for resistance to corrosion and high temperatures. It has a maximum operating pressure rating of 250 pounds per square inch (psi) at 70 degrees F ambient temperature. This 90-degree unpolished weld elbow with tangent sanitary fitting is suitable for use in food, beverage, and dairy applications.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Incoloy 800HT Buttweld Pipe Fittings play an important role where fluids are getting operated at high temperatures and extreme pressures. Pipe Fittings are mainly used in a piping system to change the flow. By using the types of buttweld fittings the industrial applications are working smoothly and performing the flow of fluids from one place to another

Titanium, zirconium, and silica all belong to the first transition group in the periodic table.

Inconel 600 alloy is arguably a standard engineering material used in a variety of applications requiring high temperature and corrosion resistance. Inconel 600 fittings have some excellent mechanical properties and are popular for their enhanced strength and high workability. Due to its chemical composition, the material possesses all these excellent properties. It contains high concentrations of various important elements such as chromium, molybdenum and nickel. It also shows good antioxidant properties.