4 inch nickel alloy pipe fitting Incoloy 825 elbow

It is a tee fitting with two outlets at a 90¡ã junction to the main line.

Grade 310S Stainless Steel Butt Weld Pipe Fitting contains low Carbon, with higher Nickel and Chromium content curbing Hydrogen sulphide attack, which used in various industries like heat exchangers, furnace parts, shipbuilding, heat treatment baskets, condensers, offshore etc.
The fittings are shaped up and then heated to a high temperature following a rapid cooling closer to the cooling in still air. This rapid cooling adds to the strength of the Stainless Steel 310 Pipe Fittings and makes them much stronger. The SS 310S Fitting is used in industries like the sea water processing, thermal energy generation plants and much domestic piping as well. 310S SS Weld Fittings is used in different pressure classes to cope up with the pressure containment requirement of the application as well.

The ASTM A234 WP5 specification consists of wrought carbon steel and alloy steel in seamless and welded form. The ASTM A234 WP5 Pipe Fittings are widely used in pressure vessel fabrication. These fittings have application under moderate to high temperatures and can also be effectively used in pressure piping systems.

Alloy 20 (Alloy 20) is an iron-based austenitic alloy developed to resist sulfuric acid corrosion. It has excellent resistance to sulfuric acid corrosion; it has strong resistance to phosphoric acid, nitric acid and chloride environments, chloride stress corrosion, pitting corrosion and crack corrosion. Therefore, alloy 20 has the name of anti-corrosion alloy; it has a wide range of applications: such as: chemical, food, medicine, power production and plastics industries will use it. For resistance to pitting corrosion and chloride corrosion, stress corrosion cracking problems, etc., alloy 20 is often used.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Inconel 718 Elbow Fittings offer excellent weldability compared to aluminum and titanium hardened nickel-based superalloys.

Type 304 stainless steel is a T 300 Series Stainless Steel austenitic. It has a minimum of 18% chromium and 8% nickel, combined with a maximum of 0.08% carbon. It is defined as a Chromium-Nickel austenitic alloy.304 stainless steel is used for a variety of household and industrial applications such as food handling and processing equipment, screws,[3] machinery parts, utensils, and exhaust manifolds. 304 stainless steel is also used in the architectural field for exterior accents such as water and fire features. It is also a common coil material for vaporizers.

ASTM A403 WP316 Elbows are used to reduce pipe size from larger to smaller sizes. Reducers are one of the most commonly used fittings, as the complexity of large pipes often requires size reduction.

Stainless steel tees are used to connect 3 pipes and join them into 1 to mix fluids. Whereas steel reducers are used to reduce the diameter of pipes. Stainless steel welded pipe fittings have a melting point of 1400 degrees Celsius and an operating temperature of 870 degrees Celsius.

Duplex steel UNS S32205 fittings (austenitic and ferritic) are widely used for functions requiring excellent corrosion resistance and efficacy. Duplex steel UNS S31803 butt welded pipe fittings generally have excellent corrosion resistance compared to other austenitic steels.

It is applicable in various applications like car headers, machinery parts, screws and also food handling equipment. Hot / Cold / Fabricate / Seamless / Welded / Induction

We have a massive stock of Super Duplex WPS 32750 Tee, known for its high ductility, and its excellent corrosion resistive nature makes it an excellent option for marine applications.

Duplex S31803 Disc Lid Fittings are almost never used above 300 degrees Celsius. Duplex steel S31803 bent butt welded pipe fittings generally perform well in environments that cause premature failure of austenitic grades. Although duplex steel S31803 short end butt welded pipe fittings have good high temperature oxidation resistance, this grade – like other duplex stainless steels – can embrittle even for short periods of time if held at temperatures above 300 degrees Celsius. If embrittled, duplex S31803 end caps can only be corrected by full solution annealing. Duplex S31803 Disc Lid Fittings are almost never used above 300 degrees Celsius.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Monel 400 is a nickel-copper alloy (about 67% Ni ¨C 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions.?Butt-weld and forged fittings are available.Excellent corrosion resistance in many acidic and alkaline environments Especially suitable for reducing conditions. Good ductility and thermal conductivity Ideal for seawater applications.

ASTM A234 WPB Pipe Fittings belong to a group of pipes and fittings that are intended for moderate to high temperature services with pressure piping. The A234 is the specification for the moderate to high temperature services where the WPB stands for grade B pressure and weldable pipes.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

AL-6XNalloy (UNS N08367) is a low carbon, high purity, nitrogen-bearing “super-austenitic” stainless alloy. The AL-6XN alloy was designed to be a seawater resistant material and has since been demonstrated to be resistant to a broad range of very corrosive environments. The high strength and corrosion resistance of the AL6XN alloy make it a better choice than the conventional duplex stainless steels and a cost effective alternative to more expensive nickel-base alloys where excellent formability, weldability, strength and corrosion resistance are essential.

Alloy 20 Industrial Fitting, Werkstoff No 2.4660 Alloy Butt Weld Tee, ANSI B16.28 Alloy 20 Cross, MSS SP-43/SP-79 Alloy 20 Stub End
ASME SB366M Alloy 20 Pipe Cap, ASME/ANSI B16.9 Alloy 20 Reducer, Alloy 20 ASTM B366 Welded Fitting, China B366 Alloy 20 Seamless Fitting Price

Oil and gas exploration and offshore drilling platforms rely heavily on the use of duplex steel forged fittings as this alloy facilitates smoother operating procedures in the industry.

We are known for providing products according to the pressing requests of our esteemed customers. Our assembled SS 316/316L pipe connectors are of high quality and can withstand high pressure and high temperatures. For the manufacture of these fittings, we select high quality raw materials. These accessories are of high quality, such as a perfect finish, durability, excellent pitting resistance, low maintenance costs and a sturdy construction.

An ASTM A403 WP304 Fittings is a type of austenitic grade fitting. SS Pipe Fittings can either be seamless or ERW.

Our Incoloy 825 Buttweld Fittings are indispensable to the oil and petroleum industry; these pipes do not support porosity as they are formed through a single metal body and can be trusted for critical transmission casses.

Steel tee is a kind of three T-shaped pipe fittings. Generally, there are two forms of equal diameter tee and reducing tee (reducing tee), both of which are used to divide (join) pipelines to adjust flow and change direction. Steel pipe tee has been widely used in different industries, according to the type of material: stainless steel tee, carbon steel tee
, alloy steel tee.

304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel.When it comes to uses, SS304 can be found in kitchen sinks and other appliances such as toasters and microwave ovens. SS304 is also used to make pressure vessels, wheel covers as well as for building facades.

Duplex steel S31803 / S32205 butt welded pipe fittings, manufactured to international quality standards, using high-grade steel. Duplex Steel S31803 Elbow Butt Weld Fittings are stainless steel, a type of stainless steel designed to improve resistance to pitting, high strength, stress corrosion, crevice corrosion and cracking. Duplex steel S32205 tee butt welded pipe fittings are often used in chemical process industries: such as sulfuric acid production, nitric acid process, phosphoric acid process, ethylene oxide, polypropylene production, PVC, equipment for handling organic and fatty acids, chemical storage and tankers, thermal Duplex steel S31803 reducer fittings such as exchangers are resistant to chloride environments and sulfide stress corrosion.

Therefore, stainless steel elbows are widely used in high temperature applications. A403 WP316 elbows are widely used to change the direction of pipes and are available in different diameters, shapes and sizes. A403 WP304 elbows can be easily welded, but the material may face localized corrosion due to the risk of intergranular corrosion.

Titanium is a transition metal that also exhibits similarities in its chemical behavior, especially in lower oxidation states, to that of chrome and vanadium.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Depending on the needs of the application, the A234 Wpb Elbow Dimensions vary.