4 inch nickel alloy pipe fittings Inconel 600 601 625 718 elbow

Inconel 625 is a non-magnetic nickel-based alloy. Known for its high strength and toughness, high corrosion and oxidation resistance, and excellent fatigue strength, Inconel 625? also offers a very wide operating temperature range, from cryogenics to 2,000¡ãF (1,093¡ãC).

ASTM A234 includes the latest editions of ASTM B16.9, B16.11, MSS-SP-79, MSS-SP-83, MSS-SP-95 and wrought carbon and alloy steel fittings of seamless and welded construction covered by MSS- SP-97.

Super Duplex Steel 1.4410 End Pipe Cap, Super Duplex Steel 2507 Cross Suppliers, We are india’s most trusted Manufacturer, Suppliers & Exporter of S32750 Super Duplex Steel Pipe Fittings, Super Duplex Steel S32750 Buttweld Fittings are Available in Different Dimensions and Specifications in China.

A butt weld pipe reducer enables there to be a change in pipe size to meet certain hydraulic flow requirements or sometimes it’s just a matter of connecting two different pipe sizes. An eccentric butt welding reducer is a pipe fitting that is used when a pipe on the upstream side of the fitting is larger than the downstream side of the fitting.

Type 317L is a molybdenum-containing austenitic stainless steel designed to provide better corrosion resistance than Type 316L in highly corrosive process environments, especially those containing chlorides or other halides. The low carbon content allows 317L to be welded without intergranular corrosion due to chromium carbide precipitation at grain boundaries. Type 317L is non-magnetic in the annealed state, but can be made slightly magnetic by soldering.

ASTM A403 WP304L covers the standard for wrought austenitic stainless steel fittings for pressure piping applications. The material for fittings shall consist of forgings, bars, plates, or seamless or welded tubular products.

S31803 is the Unified Numbering System (UNS) designation for the original duplex stainless steel. The UNS system was created by multiple trade groups in the 1970s to reduce confusion when the same alloy was called different things, and vice versa. Each metal is represented by a letter followed by five numbers, where the letter represents the metal series, i.e. S for stainless steel.

For paper mill applications requiring lower alloy grades that do not have sufficient corrosion resistance. Based on a 22% chromium content, they have a combined austenitic:ferritic microstructure that provides greater strength, corrosion resistance and cost-effectiveness.

The UNS S31803 (ASTM F51) specification has been largely superseded by UNS S32205 (1.4462, ASTM F60). This reflects their desire to maximize the alloy’s corrosion properties, thanks to the development of the AOD steelmaking process, which allows for tighter control of composition. In addition, it allows to influence the nitrogen addition level rather than just being present as a background element. Therefore, the highest performing duplex grades seek to maximize the content of chromium (Cr), molybdenum (Mo) and nitrogen (N).

Hastelloy C276 Fittings is used in high temperature and high corrosion prone applications. The material is corrosion resistant and heat resistant because of its unique composition. It is a nickel molybdenum chromium super alloy that is stabilized with tungsten. The Hastelloy C276 Fittings come under the ASTM B366 specification. HT pipe is a leading supplier and manufacturer of these fittings in different types, sizes and threads. There are seamless fittings and buttweld fittings.

In industry, pipes are used for transportation. Fluids, liquids, gases, and other products are often transported by pipelines in industry. Industrial pipes are extremely prone to dust, debris and damage, so to protect the pipe and its ends, pipe caps are widely used. We provide 1-4 to 4 chinese ss304 ss316 2205 stainless steel pipe fitting cap.

321 Fittings cover the standard for wrought austenitic stainless steel fittings for pressure piping applications. The material of pipe fittings shall include forgings, bars, plates or seamless or welded pipes. Forging or forming operations shall be performed by hammering, pressing, piercing, extruding, upsetting, rolling, bending, fusion welding, machining, or a combination of two or more of these operations. All accessories should be heat treated.

Meanwhile, the 316Ti is a titanium stable version of the 316. Anti-sensitization is achieved in the 316Ti type, titanium is added to stabilize the structure to prevent chromium carbide precipitation,

Hastelloy C276 fittings can withstand very high pressures and come with a one-year warranty. The V shape is perfect for welding and fabrication.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

One of the major concerns about the SS 304 Fitting is its low cost compared to other high end alloy material counterparts.All A403 gr WP304 Buttweld Elbow and 304 Pipe Fittings should experience heat-treatment.

ASTM A234 is Standard Specification for steel pipe fittings includes carbon and alloy steel material for moderate and high temperature services.The ASME SA 234 Gr WPB Pipe Elbow and other fittings can come in different dimensions according to the ASME/ ANSI B16.9 and B16.28 standards.

Alloy Steel Weld Fittings is a pipe attachment detail in which a pipe is inserted into a recessed area of a Valve, fitting or flange. It is mainly used small pipe diameters generally for piping whose nominal diameter is NPS 2 or smaller. Its tensile strength of is between 758-1882 MPa which is higher than the tensile strength of stainless steel.

Stainless Steel 316H Stub End Pipe Fittings are equivalent to those of the parent metal, matching or slightly over-alloyed fillers should preferably be used.

The short radius elbow materials used in our regular production line include a variety of alloys. Short radius elbows are manufactured from high quality materials such as Hastelloy, Monel, Nickel, Inconel, Titanium, Tantalum, Stainless Steel, Alloy Steel, Carbon Steel, Copper Nickel 90/10 and Copper Nickel 70/30. These fittings can be made in various short radius elbow stainless grades such as ASME / ASTM SA / A403 SA / A 774 WP-S, WP-W, WP-WX, 304, 304L, 316, 316L, 304/304L, 316/316L, DIN 1.4301, DIN1.4306, DIN 1.4401, DIN 1.4404.

Two criteria for evaluating oxidation resistance are weight change and depth of corrosion penetration. HASTELLOY X pipe bend excels in both respects due to the formation of a protective, tenacious oxide film.

The alloy is slightly magnetic at room temperature. Monel 400 is widely used in the chemical, oil and marine industries.

Nickel Alloy 600 is a solid solution of its elements and cannot be strengthened by heat treatment. Cold working will result in increased strength. Heat treatment can remove any undesirable effects of cold work.

AISI 04 stainless steel and 304L stainless steel are general purpose stainless steels with good resistance to atmospheric corrosion, many organic and inorganic chemicals, and food and beverages. The difference between 304 and 304L stainless steel is that 304L has a maximum carbon content of 0.03, which is suitable for welding, while 304 has a moderate carbon content.

Duplex S31803 Disc Lid Fittings are almost never used above 300 degrees Celsius. Duplex steel S31803 bent butt welded pipe fittings generally perform well in environments that cause premature failure of austenitic grades. Although duplex steel S31803 short end butt welded pipe fittings have good high temperature oxidation resistance, this grade – like other duplex stainless steels – can embrittle even for short periods of time if held at temperatures above 300 degrees Celsius. If embrittled, duplex S31803 end caps can only be corrected by full solution annealing. Duplex S31803 Disc Lid Fittings are almost never used above 300 degrees Celsius.

A pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction
or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

It has very good resistance to stress corrosion cracking Due to the control of carbon content and grain size, 601 has high creep rupture strength, so 601 is recommended for use in areas above 500 ¡ãC.

For the seamless steel pipe fittings refers to the fittings raw material from the seamless steel pipes and tubes. Thus the welded steel pipe fittings covers the fittings raw material from welded steel pipes.

ASTM A815 UNS S32760 fittings is the one where the strength is excellent and the corrosion resistance is excellent.The material for fittings shall consist of forgings, bars, plates, or seamless or welded tubular products.

Monel alloy K-500 pipe bend and elbow have been found to be resistant to a sour-gas environment. After 6 days of continuous immersion in saturated (3500ppm) hydrogen sulfide solutions at acidic and basic pH’s (ranging from 1.0 to 11.0), U-bend specimens of age-hardened sheet show no cracking.

As can be seen from the composition, Inconel 601 has less nickel than Inconel 600. In comparison, it has a higher chromium content. And added some aluminum elements. Nickel plays a very good role in the corrosion resistance of alloys. However, this anticorrosion effect has relatively limited resistance to oxidative environments.

We are having a team of dynamic and experienced professionals who are observing and supervising the whole process to avoid defects. SS 316/ SS 316L Compression Tube Fittings are suitable to use in chemical, food, beer, decorate, and fluid applications industries. Due to the additional Molybdenum, SS 316 Compression Fittings has better corrosion resistant properties and higher strength than grade 304. We supply best-in-class products, meeting and exceeding our client¡¯s expectations.