4140 round bar alloy bar

Nilo Alloy 36, W.Nr 1.3912, Invar 36® is a nickel-iron, low controlled expansion alloy that contains 36% nickel and possesses a rate of thermal expansion approximately one-tenth that of carbon steel.
Invar 36 Specifications: UNS K93600, W.Nr 1.3912

Common Trade Names: Nickel Alloy 36, Invar 36®, Nilo 6®, Pernifer 6®
Invar 36® is a nickel-iron, low expansion alloy that contains 36% nickel, Invar 36 has a low coefficient of expansion from cryogenic temperatures to about +500°F (260°C).
Invar 36 Tube OD:0.2-6mm, WT: 0.02-2mm

Nilo / Alloy K W.Nr.: 1.3981
UNS: K94610 ASTM F15
Fixed-expansion glass-encapsulated iron-nickel-cobalt alloys, Kovar alloys, have a linear thermal expansion coefficient similar to that of hard glass within a certain temperature range
For mating sealing with hard glass

Alloy seamless pipes are processed by advanced machines and manufactured by hot and cold processing.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.36

The Alloy Steel F12 Flanges are also very strong due to the annealing of them. Grade F12 Flanges can be supplied in either normalized or quenched and tempered conditions. Alloy Steel F12 Weld Neck Flanges is appropriate to various applications where its different remarkable characteristics are sought-after but a brushed/polished finish is not necessary.

Commercially pure wrought Nickel with good mechanical properties over a wide range of temperature and excellent resistance to many corrosives, in particular hydroxides.

Good resistance to corrosion in acids and alkalis and is most useful under reducing conditions. Outstanding resistance to caustic alkalis up to and including the molten state. In acid, alkaline and neutral salt solutions the material shows good resistance, but in oxidizing salt solutions severe attack will occur. Resistant to all dry gases at room temperature and in dry chlorine and hydrogen chloride may be used in temperatures up to 550C. Resistance to mineral acids varies according to temperature and concentration and whether the solution is aerated or not. Corrosion resistance is better in de aerated acid.

Fasteners made from this austenitic stainless steel require carbide solution treatment of the bar to be threaded, or carbide solution treatment after the head operation of bolts with forged heads.

A335 P9 steel pipe material also contains manganese, silicon, carbon and phosphorus in its composition. The addition of these materials makes the material stronger with higher yield and tensile strengths. Due to the high chromium content, the redox effect is high.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.37

S32205 is a duplex stainless steel with twice the strength of austenitic stainless steel. Duplex stainless steel composed of 21% chromium, 2.5% molybdenum and 4.5% nickel-nitrogen alloy. It has high strength, good impact toughness and good overall and local stress corrosion resistance. The yield strength of duplex stainless steels is twice that of austenitic stainless steels, a feature that allows designers to reduce weight when designing products, making this alloy more affordable than 316, 317L. This alloy is particularly suitable for use in the -50¡ãF/+600¡ãF temperature range. For applications outside this temperature range, this alloy can also be considered, but there are some limitations, especially when applied to welded structures. Duplex stainless steel has twice the compressive strength compared to austenitic stainless steel, and designers can reduce its weight compared to 316L and 317L. Alloy 2205 is particularly suitable for use in the -50¡ãF/+600¡ãF temperature range, and can also be used at lower temperatures under severe restrictions (especially for welded structures).

ASTM A335 P9 pipe standards and schedules vary based on the needs of the application. A335 P9 chromium pipe composition contains 9% chromium and 1% molybdenum.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.55

At elevated temperatures, conventional steels, unlike ASTM A 335 P91 pipes, begin to lose their microstructural form, leading to failure. A burst or crack in the pipe is a visible fault. But since SA 335 P91 chrome-plated welded pipe is well suited to sustain itself at high temperatures, failure rates are extremely low.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

ASTM A182 Grade F2 is an alloy steel used for preliminary forming into forged products. The properties cited apply to the annealing conditions. F2 is the ASTM designation for the material. K12122 is the UNS number.

We also provide various alloy steel ASTM A182 F5 flanges, such as ASTM A182 F5 slip-on flanges, alloy steel F5 butt weld flanges, F5 alloy steel socket weld flanges, A182 F5 alloy steel blind flanges, alloy steel F5 Orifice Flange, A182 Alloy Steel F5 Blind Flange, A182 F5 Threaded/Threaded Flange, Alloy Steel F5 Reducing Flange, ASTM A182 F5 Alloy Steel Ring Type Joint Flange (RTJ) etc.

ASTM A182 F11 Alloy Steel Flanges are used in manufacturing of flanges and fittings and are used in industries where cold temperature is observed and corrosion resistance doesn¡¯t matter much.

Alloy and stainless steel pipes are ideal for high-quality applications, selected for their durability, machinability, and superior corrosion resistance. We supply materials for a variety of industries such as: food processing, pharmaceuticals, energy, plant maintenance, and oil and gas exploration.

Pipe to ASTM A335 P11 can be cold drawn or hot rolled. Each tube shall be reheated for heat treatment – fully or isothermally annealed, normalized and tempered at a temperature not lower than 1200¡ãF (650¡ãC). Each pipe length shall be hydrostatically tested to ASTM A335 P11, along with dimensional inspection and visual inspection. Longitudinal or transverse tensile tests, flattening tests or bending tests are carried out for each heat.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P129

Whether manufactured to ANSI, ASME or custom standards, flanges are critical to manufacturing, utility and industrial applications around the world.

Weld Neck Flange is expensive because of its long neck and cost of people for contact WN flange with pipeline or fitting but is preferred for high-stress applications. The necks, or hubs, transmits stresses to the pipeline.

ASTM A320 L7 washers are specially engineered for LOW temperature performance. These fasteners are commonly used for valves, flanges, fittings, and pressure vessels.

The material contains carbon, manganese, phosphorus, sulfur, silicon, 8% chromium and molybdenum in a mixture. SA 335 grade P5 alloy steel pipe has similar strength to most austenitic stainless steel grades, with a minimum yield strength of 205MPa and a minimum tensile strength of 415MPa.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P120

The carbon content in the Sa182 F9 flange is lower, so the weldability of this alloy is much better. Generally, higher carbon content in alloys promotes intergranular corrosion, especially during high heat treatments such as welding.

Alloy pipe is defined according to the material used in production (ie material), as the name suggests, it is made of alloy pipe; seamless pipe is defined according to the production process (seamless), which is different from seamless pipe is seamless pipe, Including straight seam welded pipe and spiral pipe.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.27

The ASTM A194 specification covers carbon, alloy and stainless steel bolts for high pressure and/or high temperature service.

The ASTM A320 Grade L7 specification covers stainless steel bolting materials for low temperature service. This standard cover rolled, forged, or strains hardened bars, bolts, screws, studs, and stud bolts used for pressure vessels, valves, flanges, and fittings.

The ANSI B16.5 Alloy Steel Slip On Flange is a flange type that allows the pipes to slip onto the flange and makes the connection in a precise locations.

They are ideal for applications carrying corrosive or high-temperature fluids or gases. Industries that could benefit from chrome moly flanges include: Oil and Gas, Refinery, Power Generation, and Chemical Processing.

ASME SA335 P9 Alloy Steel Seamless Pipe is certified and tested according to Tensile Test, Transverse Tensile Test, Flattening Test, Metal Structure and Etching Test, Photomicrograph, Hardness Test, etc.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.25

The high chromium content gives these alloy steel socket weld flanges very good resistance to moisture erosion, which also contributes to their high temperature strength and resistance to scaling at high temperatures.

These flanges are available in different types such as slip flanges, blind flanges, butt weld flanges, socket weld flanges, orifice flanges, eyeglass blind flanges, threaded/threaded flanges, reducer flanges, ring flanges Type joint flange (RTJ), etc.

While the term alloy steel could even apply to stainless steel grades, the ASTM specification or ANSI standard used to produce the Alloy Steel Flanges would give the buyer details regarding the chemistry details of these products.

Alloy steel seamless pipes are widely used in medium and low pressure fluid pipelines, casings, boiler tubes, oil and gas industry, chemical industry, power generation industry, transformers, agriculture, bearings, general engineering, automobiles, hydraulics, railways, mining, construction, aviation Aerospace, medical, defense and electric motors. P91 alloy steel is mainly used in the power industry. For welded structures, the ASME Boiler and Pressure Vessel Code limits the carbon content to less than 0.35%. Alloy steels are ideal for applications that require higher strength, tougher or better wear resistance than standard carbon steel grades.

B7 and B7M shall be heat treated by quenching in a liquid medium and tempering. For B7M fasteners, the final heat treatment, which may be the tempering operation if conducted at 1150 ¡ãF [620 ¡ãC] minimum, shall be done after all machining and forming operations, including thread rolling and any type of cutting.

The flanges can be threaded, ring type joint, lap joint, weld neck or socket welded.