SA276 316 rod 420 150mm aisi 304 solid 416r grade stainless steel round bar

Nickel based 800 Incoloy Hexagonal Pipe is known to have a good resistance to corrosion. Specifically speaking, the Incoloy 800 Pipe offers sufficient resistance against both carburization as well as oxidation corrosion.

Inconel 625 Coil is characterized by its excellent resistance to oxidation, high-temperature corrosion and fatigue. ASTM B443 UNS N06625 Inconel Plate is widely used in the aerospace, chemical processing and oil and gas industries due to its superior strength, toughness and durability even in extreme environments.

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

Inconel 718 is a nickel-chromium-based alloy that is commonly used in high-temperature applications such as aerospace and gas turbines. One of the most important factors in the production of ASTM B670 Inconel 718 Sheet is the plate rolling process. There are two main types of Inconel 718 plates available on the market: hot rolled and cold rolled plates.

ASTM A240 Type 2205 Plate is a duplex stainless steel plate that is used extensively in various industries such as chemical processing, oil and gas exploration, and marine engineering. SA 240 GR 2205 Sheet is made from grade 2205 stainless steel, which is a combination of ferritic and austenitic steel.

UNS N08367 also commonly referred to as alloy AL6XN is a low carbon, high purity, nitrogen-bearing “super-austenitic” nickel-molybdenum alloy with excellent resistance to chloride pitting and crevice corrosion.

Nickel Alloy 400 and Monel 400, also known as UNS N04400, is a ductile nickel-copper-based alloy consisting primarily of two-thirds nickel and one-third copper. Nickel Alloy 400 is known for its resistance to a variety of corrosive conditions, including alkalis (or acids), salt water, hydrofluoric acid, and sulfuric acid. Since Monel 400 or Alloy 400 is a cold worked metal, this alloy has high hardness, stiffness and strength. By cold working ASTM B164 UNS N04400 bar stock, the alloy is subjected to higher levels of mechanical stress, which in turn causes changes in the alloy’s microstructure.

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

This provides greatly enhanced resistance to sulfuric acid. It also has a high chromium content, to maximize its resistance to oxidizing chemicals and process streams contaminated with ferric ions and dissolved oxygen.

It demonstrates good resistance to neutral and reducing environments. This alloy creates a tenacious oxide, protective film that does not spall off, but it retains superior oxidation resistance at soaring temperatures.

ASME B36.19M is the standard specification for stainless steel pipes, which specifies the dimensions, tolerance, and manufacturing requirements for both welded and seamless pipes.

304 Piping Spools are made of 304 Stainless Steel, a common and popular material in many industrial applications that require resistance to corrosion and oxidation. These S30400 Piping Spools are prefabricated using specialized machinery and processes, which ensure that they are highly accurate and reliable.

The 316 stainless steel pipe has become an indispensable material for the industrial sector. This alloy of iron and chrome is recognized for its high resistance to corrosion, as well as its durability. 316 stainless steel tubing can be produced in both seamless and welded tubes to meet specific customer needs.

SMO 254 Pipes can withstand high mechanical stress and Alloy 254 SMO Pipe high pressure work in high temperatures and corrosive environments.

Incoloy 800H Flange We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

ASTM A312 TP316 is a standard specification for seamless, straight-seam welded, and heavily cold worked welded austenitic stainless steel pipes used in high-temperature and general corrosive service applications. The 316 Seamless Industrial Steel Pipe is made from a combination of chromium, nickel, and molybdenum, which gives SS 316 Seamless Tube excellent resistance to corrosion and rust.

It is able to withstand a wide range of oxidizing and non-oxidizing chemicals, and exhibits outstanding resistance to pitting and crevice attack in the presence of chlorides and other halides.

Common Trade Names: Nickel Alloy 36, Invar 36®, Nilo 6®, Pernifer 6®
Invar 36® is a nickel-iron, low expansion alloy that contains 36% nickel, Invar 36 has a low coefficient of expansion from cryogenic temperatures to about +500°F (260°C).
Invar 36 Tube OD:0.2-6mm, WT: 0.02-2mm

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

316L 1.4401 S31603 Stainless Steel Pipe is a highly versatile and durable pipe option commonly used in a wide range of industrial and commercial applications. This SS UNS S31603 pipe is made from high quality 316L stainless steel with excellent resistance to corrosion, oxidation and staining, making it ideal for harsh environments or high stress applications.

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

Inconel 600 round bar is a nickel-based alloy with benign carburization and excellent corrosion resistance at high temperatures. Inconel 600 round bars are effective against drying Cl2 and many other different gases at mild and high temperatures. Alloy 600 bar is a nickel-chromium alloy with good oxidation resistance and resistance to chloride pressure decomposition cracking, high cleanliness water corrosion and acid oxidation at elevated temperatures.

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

Nickel-copper-based alloy 400 Monel 2.4360 cold drawn rod is virtually immune to chloride stress-related corrosion cracking when exposed to corrosive media in typical environments. Monel 400 is a copper and nickel based alloy that is popular today due to its high performance. The alloy has excellent acid and alkali resistance. In addition, it has good tensile strength, ductility, excellent thermal conductivity, and can be hardened by cold work. Additionally, it can be used in applications with temperatures ranging from minus to 538 degrees Celsius.

Nilo Alloy 36, W.Nr 1.3912, Invar 36® is a nickel-iron, low controlled expansion alloy that contains 36% nickel and possesses a rate of thermal expansion approximately one-tenth that of carbon steel.
Invar 36 Specifications: UNS K93600, W.Nr 1.3912

A789 UNS S31803 and UNS S32205 are two grades of duplex stainless steel that are widely used in various industrial applications. These Duplex S31803 Seamless Pipes are known for their excellent corrosion resistance, high strength, and good weldability. A789 is a specification that covers seamless and welded tubes made from duplex stainless steel.

Nickel 200 flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

Nilo / Alloy K W.Nr.: 1.3981
UNS: K94610 ASTM F15
Fixed-expansion glass-encapsulated iron-nickel-cobalt alloys, Kovar alloys, have a linear thermal expansion coefficient similar to that of hard glass within a certain temperature range
For mating sealing with hard glass

The pipes of seamless configurations have higher load-bearing capacity and strength over other grades.

Steel flanges provide an easy access for cleaning, inspection or modification. They usually come in round shapes but they can also come in square and rectangular forms. The flanges are joined to each other by bolting and joined to the piping system by welding or threading and are designed to the specific pressure ratings; 150lb, 300lb, 400lb, 600lb, 900lb, 1500lb and 2500lb.

A flange can be a plate for covering or closing the end of a pipe. This is called a blind flange. Thus, flanges are considered to be internal components which are used to support mechanical parts.

UNS N08367 also commonaly called as AL6XN alloy. AL-6XN alloy (UNS N08367) is a low carbon, nitrogen-bearing and high purity “super-austenitic” stainless alloy. The corrosion resistance and high strength of the Al6XN WN Flange make it a better choice than the conventional duplex stainless steels such as 904L or 254 SMO where excellent weldability, formability, corrosion resistance and strength are essential.

Stainless grade 316Ti contains a small amount of titanium. The titanium content is usually only around 0.5%. Titanium atoms stabilize the structure of 316 at temperatures in excess of 800¡ãC.

It is virtually immune to chlorine ion stress corrosion cracking. Demonstrates adequate resistance to organic acids such as acetic, formic and stearic. Excellent resistance to high purity water used in primary and secondary circuits of pressurized nuclear reactors.

Usually the ASTM A234 WP9 elbows,tees,reducers are made from steel pipes,the caps are made from plates.But the large sizes pipe fittings are commonly manufactured in pieces and welded together.In hot or concentrated solutions, rates of these Alloy Steel WP9 Cross Butt Weld Fittings are typically too high for sensible service life.

Inconel 718 is a high strength, corrosion resistant nickel-chromium material that can be used in temperatures from -423¡ã to 1300¡ãF. Inconel 718 age hardening alloy can be easily fabricated, even into complex parts. The welding characteristics of Inconel 718, especially its resistance to post-weld cracking, are excellent.

Duplex 2507 possesses excellent mechanical properties. Often a light gauge of 2507 material can be used to achieve the same design strength of a thicker nickel alloy.

The flange is second most used joining method after welding. Flanges are used when joints need dismantling. It provides flexbility for maintenance. Flange connects the pipe with various equiment and valves. Breakup flanges are adde din the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrelated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls ae required in the selection and application of all these elements to attain a joint, which has acceotable leak tightness.

304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel.When it comes to uses, SS304 can be found in kitchen sinks and other appliances such as toasters and microwave ovens. SS304 is also used to make pressure vessels, wheel covers as well as for building facades.

Stainless Steel 310 Ring Type Joint Flanges are marked with grades, materials, sizes, and Third party Inspections stamps before passing on to stainless steel pipe exporters. 310S Stainless Steel Spectacle Blind Flanges are produced will know certain testing, quality check. This process for SS 310 Spacer Flanges are followed by proper packing and dispatch.

Alloy steel is divided into two categories: high-alloy steel and low-alloy steel. Low alloy steel flanges, on the other hand, contain about 0.05 ¨C 0.25% carbon and up to 2.0% manganese.

All stainless steel fabrication can only be done using tools designed for stainless steel materials. Tools and work surfaces must be thoroughly cleaned before use. These precautions are necessary to avoid cross-contamination of stainless steel with easily corroded metals that may discolor the surface of processed products.

Alloy steel pipes are common in applications involving automobiles, kitchenware, and industrial equipment. Typically, superalloy steel boiler tubes are used in applications with ambient temperatures exceeding 500¡ãC. For example, hollow and thin-walled alloy steel drill pipes must be able to resist pressure differences that manifest between the inside and the outside of these alloy steel seamless pipes.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.45

AISI 304H is readily formed and fabricated through a full range of cold working operations.

Monel 400 Bolts and Nuts are made from a nickel-copper alloy for extreme corrosion resistance, especially in sour conditions. The material is also strong and rigid and can be used to produce bolts and nuts for high temperature service. HT PIPE is a leading manufacturer and supplier of Monel 400 Bolts and Nuts of all sizes and types. Among the ingredients are carbon, aluminum, manganese, silicon, iron, sulfur and 63% nickel and 28% copper. This composition gives the material a high melting point.

SS 347 Weld Neck Flange
Featuring 304 stainless steel for very good corrosion resistance, this GRAINGER APPROVED weld neck flange can be attached to a system via a circumferential weld at the neck. The welded area can be easily examined by radiography. Matched pipe and flange bore reduces turbulence and erosion inside the pipeline. Flange is excellent for use in your critical applications and is ideal for use with air, water, oil, natural gas, and steam.

The Duplex Pipes are used in high temperature applications along with the Duplex stainless steel tube as well. There are different shapes and sizes of these pipes.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

One of the main benefits of using nickel alloys is that they tend to be resistant to high temperatures. ASTM B425 UNS N08825 bar stock has a nickel content between 38% and 46% and is able to withstand a moderately high temperature range without affecting its tensile strength. This property is particularly useful in applications involving nuclear fuel reprocessing, where Incoloy 825 Square bar is considered a value-add. In nuclear reprocessing, the process involves separating chemicals such as fission products and excess uranium from spent nuclear fuel.

Stainless Steel 316 Slip On Flanges
Featuring 304 stainless steel for very good corrosion resistance, this GRAINGER APPROVED weld neck flange can be attached to a system via a circumferential weld at the neck. The welded area can be easily examined by radiography. Matched pipe and flange bore reduces turbulence and erosion inside the pipeline. Flange is excellent for use in your critical applications and is ideal for use with air, water, oil, natural gas, and steam.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Hastelloy C276 material is designed with good mechanical properties. They have a minimum tensile strength of 601Mpa and a minimum yield strength of 204Mpa. This material makes the alloy easy to machine and elongate.

Steel pipes can be disintegrated on the basis of its application. Typical applications of steel pipes are in the area of water pipelines, industrial water lines, oil pipe lines, cross country pipe line, agriculture and irrigation pipes, tube lines for natural gas, chemical industries, automobile industry, construction industries and other purposes.

Applications for duplex 1.4462 coated studs are the oil and gas industry, marine industry, chemical industry, paper and pulp industry, etc. We offer Lean Duplex and Standard Duplex in a wide selection of duplex grades. Duplex 2205 studs have specific properties for different environments. The chemical composition of the duplex 2205 material has chromium, nickel and molybdenum in the composition. Duplex 2205 studs are cost-effective and lower than other duplex grades and are in high demand.

Stainless steel round bars 3mm to 90mm cold drawn and polished, larger diameter peeled and polished. Stainless steel round bars are ordered according to ISO H9 (H tolerance is negative). European Steel Stock Stainless Steel Round Bars are available in the following grades 303, 304, 316, 431 EN 57, 904L Other grades available on request. The length is random and varies between 4 and 6 meters. We offer a full cut service so we can provide the exact size and length you need.

In addition to good corrosion resistance, the addition of chromium and molybdenum to the alloy enhances its ductility.

Duplex 2507 has high resistance to chloride stress corrosion cracking, high Strength, and superior resistance to chloride pitting and crevice corrosion.

The fertilizer and chemical processing industry use 310 310S Stainless Steel Flanges for mild cyclic operations. Furnaces, power generation and thermal processing industries function at extremely high temperatures, thus requiring flanges that are tough at such temperatures.

304 fittings are standard “18/8” stainless steel; it is the most versatile and widely used stainless steel available in a wider range of products, forms and finishes than any other. It has excellent forming and welding characteristics.

Flange connection has good strength and sealing, simple structure and low cost. It can be repeatedly disassembled.

Steel flanges provide an easy access for cleaning, inspection or modification. They usually come in round shapes but they can also come in square and rectangular forms. The flanges are joined to each other by bolting and joined to the piping system by welding or threading and are designed to the specific pressure ratings; 150lb, 300lb, 400lb, 600lb, 900lb, 1500lb and 2500lb.

A flange can be a plate for covering or closing the end of a pipe. This is called a blind flange. Thus, flanges are considered to be internal components which are used to support mechanical parts.