45 degree elbow incoloy 825 threaded nickel alloy pipe fitting

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

This 316L Stainless Steel 90 Degree Weld Elbow is a common connection pipe fitting used in plumbing installation. It is used for connecting the bend of pipe and changing the direction of pipe. Since the 90 degree weld elbow has good strength and resistance to corrosion, it has long service life and low maintenance cost.

ASTM A403/ A182/ A240 and ANSI B16.9/16.28/ B16.25/ MSS SP-43. 316/316L is a nickel-chromium stainless steel alloy to which copper and molybdenum have been added. It is a non-magnetic austenitic stainless steel, so it is especially useful in severely corrosive conditions.

Unlike other types of steel such as 304 and 306, the 316l stainless steel alloy can be used in a variety of applications where high corrosion resistance is required. For example, specialists in the chemical and pharmaceutical industries use it to make surgical tools and medical implants.

We warmly welcome our regular and new clients to join us for ASTM Seamless Tee B366 (WP20CB, UNS N08020, Alloy20).

Steel Pipe Pipe Bends can work under constant pressure due to excellent dexterity and high load-bearing capacity.

Type 304 stainless steel is a T 300 Series Stainless Steel austenitic. It has a minimum of 18% chromium and 8% nickel, combined with a maximum of 0.08% carbon. It is defined as a Chromium-Nickel austenitic alloy.304 stainless steel is used for a variety of household and industrial applications such as food handling and processing equipment, screws,[3] machinery parts, utensils, and exhaust manifolds. 304 stainless steel is also used in the architectural field for exterior accents such as water and fire features. It is also a common coil material for vaporizers.

We have a massive stock of Super Duplex WPS 32750 Tee, known for its high ductility, and its excellent corrosion resistive nature makes it an excellent option for marine applications.

Grade 316 stainless steel pipe bend is readily weldable by most fusion techniques (GTAW / TIG, GMAW / MIG / MAG, MMAW / stick, SAW), with no preheat, postheat or control of interpass temperature needed.

Butt welded pipe fittings provide the user with a means of manipulating the piping system. For example, elbow stainless steel pipe fittings can be produced at customizable angles if the system needs to change the flow direction.

Astm b366 incoloy 800ht butt welded pipe fittings have some chemical compositions such as chromium, nickel and iron. Our butt welded pipe fittings provide increased creep and stress rupture and high temperature corrosion resistance. These butt weld fittings are available in custom and standard forms. Astm b366 incoloy 800ht butt welding fittings manufacturing process to ensure top quality.

Alloy 800HT / Incoloy 800HT is a controlled composition derivative of INCOLOY alloy 800H (UNS N08810) and is used for the same creep resistant applications, however the combined effects of mechanical and thermal processing of the alloy permit higher design stresses to be incorporated than are permitted for the conventional alloy.

Stainless Steel Pipe Bends are widely used in high-temperature applications.

Carbon steel butt welded seamless pipe fittings are the most commonly used fittings. We have a large inventory of carbon steel welding fittings such as elbows, caps, reducers, tees, couplings, unions, and more, ideal for pressure vessels as well as chemical and acid manufacturing.

2205 is the most widely used duplex (ferritic/austenitic) stainless steel pipe fittings. It is used due to its excellent corrosion resistance and high strength. Duplex S31803 fittings offer a better guarantee of corrosion resistance, but most duplex S31803 currently produced also complies with duplex S31803. 1.4462 belongs to the DUPLEX steel series. This steel has higher corrosion resistance than eg austenitic 1.4404. Therefore, the tensile yield point is about 150% higher.

A234 WPB SCH 80 Elbow is a standardization that conforms to schedule 80. ASTM A234 WPB Elbow could also be threaded or machined; sometimes it is also socketed.

800H, AT (Incoloy 800) is an austenitic heat resistant alloy designed for high temperature structural applications.

These fittings don¡¯t deform or dissociate easily at high pressures and elevated temperatures. The Alloy 600 Fittings possess superior strength and excellent mechanical properties. They possess a minimum tensile strength of 655Mpa and a minimum yield strength of 310 Mpa.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

INCONEL (nickel-chromium-iron) alloy 600 (UNS N06600/W.Nr. 2.4816) is a standard engineering material for applications requiring corrosion and heat resistance. The alloy also has excellent mechanical properties and has an ideal combination of high strength and good machinability.

AL-6XN is a low carbon, nitrogen containing super austenitic stainless steel. The alloy is designed to be a seawater resistant material and has been found to resist a wide range of corrosive environments. Due to the alloy’s corrosion resistance and high strength, AL-6XN is a better choice than traditional duplex stainless alloys and more cost-effective nickel-based alloys.

Grade WPB is the most common material for medium and high temperature pipelines in these standards. W stands for “weldable,” P for “pressure,” B for “grade b,” and Y for “yield strength.”

Stub ends are used with lap flanges. Metline is an ISO certified, PED approved duplex 2205 stub end manufacturer and supplier with a manufacturing base in India. We can supply both long and short ends (collars) with test certificate according to EN10204 3.1.

825 is an austenitic Ni – Fe – Cr – Mo – Cu nickel based alloy developed to resist corrosion in very aggressive media.Alloy 825, also known as Incoloy 825, is a nickel-iron-chromium alloy with molybdenum and copper added.

Alloy 20 Industrial Fitting, Werkstoff No 2.4660 Alloy Butt Weld Tee, ANSI B16.28 Alloy 20 Cross, MSS SP-43/SP-79 Alloy 20 Stub End
ASME SB366M Alloy 20 Pipe Cap, ASME/ANSI B16.9 Alloy 20 Reducer, Alloy 20 ASTM B366 Welded Fitting, China B366 Alloy 20 Seamless Fitting Price

The tensile strength of this superalloy is 690 MPa, while its yield strength measures 275 MPa.

Inconel 600 Pipe Fittings is used and applied by several industries. It is involved in process equipment such as fluorinated and chlorinated hydrocarbon productions. Manufacturers of a heat exchanger and reactor vessels like using this type of alloy, especially in the construction of vinyl chloride and other substances.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

We are a manufacturer, trader, stocker, supplier and exporter of a full range of Duplex Steel S31803, S32205 Pipe Fittings made of 50-50 Austenitic-Ferritic microstructure with excellent impact toughness and higher resistance to general corrosion.

Monel 400 is a nickel-copper alloy (about 67% Ni ¨C 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions.?Butt-weld and forged fittings are available.Excellent corrosion resistance in many acidic and alkaline environments Especially suitable for reducing conditions. Good ductility and thermal conductivity Ideal for seawater applications.