6 inch welded stainless steel pipe fittings 304 tee

We are a professional manufacturer and exporter of ASTM B366 WP20CB Pipe Fittings N08020 elbow, Alloy 20 Elbow Tee reducer Caps

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Butt weld elbows in the Incoloy 825 series are one of the strongest and most versatile elbows types. These fittings can be easily attached to pipe because they have beveled ends that meet ASME B16.25. These elbows allow the module to create full penetration welds without any additional penetration or preparation. The fittings are welded according to the butt welding procedure, placing them on the assembly and welding in place. Welded connections in this range provide a strong and high-strength connection. These fittings are available in larger and stronger sizes compared to other grades of fittings.

Incoloy 800 fittings have excellent corrosion resistance and remain stable even after prolonged exposure to high temperatures. High strength components exhibit good resistance to stress corrosion cracking and can be formed by welding or seamless processes.

With Up To 3000 Ton Capacity Proficient Of Cold Forming 8″ Nb SS 304 Fitting And ASTM A403 WP304 Elbow Upto 12″ Nb And Wall Thicknesses Upto 0.75″ Thick As Per Ansi/ Asme B16.9.

The molybdenum gives SS 316 better overall corrosion resistant properties than Stainless Steel 304, particularly higher resistance to pitting and crevice corrosion in chloride environments.

It is commonly referred to by the tradename Hastelloy C22 and the universal designation UNS N06022. C22 has excellent corrosion and oxidation resistance, great mechanical properties over a wide range of temperatures, and good fabrication properties.

ASTM A 403 WP 316L is very durable across acidic and chemical toxicants. The grade has a specific thermal capacity of 500 at 20/kg K. The robust A403 WP316L module has a minimum tensile strength of 485mpa with a minimum yield strength of 170mpa and can be elongated by 40% in the system.

Industry users like the resistance to a wide range of organic acids and the resistance to chloride-induced stress-corrosion cracking.

It is a tee fitting with two outlets at a 90¡ã junction to the main line.

More than a hundred years of development have allowed nickel alloys to have a wide range of applications and strengths, and have produced many forms. We offer Inconel, Monel and Incolloy alloys for everyday use and high stress industrial, energy or chemical environments.

Stainless steel is a steel alloy that contains at least 10% chromium, making it corrosion resistant. The addition of chromium to stainless steel creates a thin film of metal oxide over the metal’s surface that protects against corrosive materials.

MONEL K500 is a age-hardenable Nickel-Copper alloy which combines the corrosion resistance of Alloy 400 with high strength corrosion fatigue and erosion resistance.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

ASTM A403 WP304H pipe fittings mean the pipe fittings which material is wrought austenitic stainless and grade is ASTM A403 WP304H.The material is additionally utilized all through the control era industry.

With the addition of niobium stainless steel WNR 1.4401 fittings, the fittings become stable against sensitization and the resulting intergranular corrosion. It also prevents intergranular corrosion in the welded state. It can also be thermoformed by using the isoforce required to heat austenitic steels. It has precise mechanical housing for every environment and elevated temperature. The copper-containing material in the fittings protects them from sulfuric acid.

SD UNS S32750 reducer is having very good yield potency and ductility as compared to the other austenitic metals and thus fabrication will find an augmented radius of meandering, higher materializing force and greater allowances for the spring back.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Inconel 600 butt welded fittings are also resistant to stress-related corrosion cracking in chloride environments. They are effective against alkaline environments. Inconel 601 fittings also exhibit all of these properties, but due to the addition of aluminum to their chemical composition, they exhibit improved mechanical performance even in extremely hot environments.

Alloy X pipe bend is known for its excellent high temperature strength withstanding up to 2200¡ãF. The alloy can also be easily fabricated with forming and welding characteristics by both manual and automatic methods.

Titanium’s thermodynamic properties do not allow it to melt in normal conditions, because it becomes more reactive at elevated temperatures and can catch fire if the oxygen molecules are present in its environment.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Tee butt weld fittings are made from A312 dual certified 304/304L or 316/316L stainless steel with milled inside and outside diameters (ID/OD). These stainless steel welded joints meet ASTM A403, ASTM A960, MSS SP-4, ASTM B16.9 (except for walls) and MSS SP-43. Schedule 10 fittings are nominal pipe size (NPS), not pipe outside diameter (OD). Schedule 10 pipe and fittings have wall thicknesses that are nearly twice as thick as standard 16 gauge pipe OD fittings, making them ideal for custom turbine manifold and downpipe fabrication. The increased wall thickness provides additional durability and is less prone to cracking under the high thermal stress of exhaust gas temperatures.

Duplex Steel S32550 Pipe Fittings has high stress corrosion resistance. These UNS S32550 Pipe Fittings also has lower thermal expansion than austenitic stainless steels. It also has higher thermal conductivity than austenitic stainless steels, and excellent general corrosion resistance in a wide variety of corrosive chemicals including seawater and industrial acids

Monel K500 pipe bend and elbow are usually used in propeller, pump shafts, pumps, valves used in the manufacture of perchlorethylene, and chlorinated plastics.

According to ASME Boiler and Pressure Vessel Code, ASTM A420 WPL6 is not permitted for use in the construction of power boiler.

An important feature of Incoloy UNS N08800 Elbow is that it not only exhibits good mechanical properties at ambient temperature conditions, but also performs well at high temperature settings up to 1000¡ãF.

Incoloy 825 alloy is a nickel-iron-chromium alloy that combines molybdenum, copper and titanium for excellent resistance to many corrosive environments. Incoloy 825 is very corrosion resistant. It has a high nickel content, sufficient to resist chloride ion stress corrosion cracking, and a very stable austenitic configuration.

Long elbows as sanitary fittings are used in low-pressure gravity-fed systems and other applications where low turbulence and minimum deposition of entrained solids are of concern.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

S31803 is resistant to stress chloride corrosion cracking, and duplex stainless steel exhibits the best corrosion performance in high temperature and sulfide environments.