625 32760 630 17-4ph 310s 310 600 825 c276 monel400 elbows clamp tee stainless steel pipe fittings

Welded A234 WPB pipe fittings mean the large sizes fittings which are pieces welded from steel plates.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Its properties make it perfect for heavy-duty applications and those that require a high melting point and toughness under the harshest conditions.

These alloys can function at very high temperatures and in severe mechanical stress environments, and also where high surface stability is required. They have high creep and oxidation resistance.

Sanitary elbows are a crucial link in the chain of fluid systems everywhere. While these types of equipment are highly specialized in nature, their presence in industrial, commercial, and even residential spaces is more ubiquitous than you might think.

The Molybdenum of Hastelloy B2 pipe bend is the primary alloying element which provides significant corrosion resistance to reducing environments.

In general, the Type 316 grade can be considered equally good in a given environment. A notable exception is intergranular corrosion in the heat-affected zone on welds and susceptible alloys in sufficiently corrosive environments. In such media, Type 316L is more suitable for welding conditions than Type 316 because the low carbon content increases resistance to intergranular corrosion.

Please make sure to contact us for more information on the pipe fitting products such as the ASTM A860 MSS SP 75 WPHY 52 Pipe Fittings and their pricing.

304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel.When it comes to uses, SS304 can be found in kitchen sinks and other appliances such as toasters and microwave ovens. SS304 is also used to make pressure vessels, wheel covers as well as for building facades.

Monel 400 is a nickel-copper alloy (about 67% Ni ¨C 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions.?Butt-weld and forged fittings are available.Excellent corrosion resistance in many acidic and alkaline environments Especially suitable for reducing conditions. Good ductility and thermal conductivity Ideal for seawater applications.

An important feature of Incoloy UNS N08800 Elbow is that it not only exhibits good mechanical properties at ambient temperature conditions, but also performs well at high temperature settings up to 1000¡ãF.

Incoloy 825 alloy is a nickel-iron-chromium alloy that combines molybdenum, copper and titanium for excellent resistance to many corrosive environments. Incoloy 825 is very corrosion resistant. It has a high nickel content, sufficient to resist chloride ion stress corrosion cracking, and a very stable austenitic configuration.

Monel 400 is essential in heat exchangers, chemical plant equipment, and boiler feeders. It is ideal in wire or rod form and is excellent for trolling wire due to its resistance to seawater.

All SA234 WPB Elbow are manufactured in India and produced from strictly European sourced raw material. All ASTM A234 Elbow & Elbow A234 Wpc are manufactured from plate, pressed in two halves with two weld seams.

Type 304 is the most popular stainless steel and is a natural choice for its corrosion resistance. It resists rusting in many different environments, but is primarily attacked by chlorides.

ASTM A403 WP321 is one of the most common stainless steel pipe fittings material.(ASTM A403 WP321 Standard Specification)

316 pipe bend contains a minimum 2.0% molybdenum which makes it much more corrosion resistant than 304 however, as it is a more expensive element, generally makes 316 a more expensive grade of metal.

What makes this material a cost-effective alternative is that the nickel content that manufacturers use to produce dual-phase steel butt-welded pipe fittings is lower than that of super-duplex steel. While the reduction in nickel content gives the metal lower mechanical properties, the higher molybdenum and chromium content almost makes up for the lack of nickel in duplex stainless steel fittings.

Austenitic stainless steel 304 L is favored by most buyers for its excellent weldability and is a low carbon version of the very popular alloy 304. Stainless steel 304L pipe fittings tend to be resistant to intergranular corrosion since the reduction in carbon means the alloy is not sensitized by grain boundary precipitates.

800H, AT (Incoloy 800) is an austenitic heat resistant alloy designed for high temperature structural applications.

When we call a steel tee ¡°equal tee¡±, means the branch diameter of this tee is same with the main pipe (Run pipe) diameter of this tee. When we see only one size of tee in its description, it means this tee is the equal tee. for example, 8¡å tee mean the tee main pipe and branch pipe both are 8 inches. Sometimes the equal tee also described 8¡åX8¡å which is the same meaning of 8¡å tee.

INCONEL (nickel-chromium-iron) alloy 600 is a standard engineering material for applications which require resistance to corrosion and heat. The alloy also has excellent mechanical properties and presents the desirable combination of high strength and good workability.

A equal tee is the most common pipe fitting. It is used to either combine or split a fluid flow. It is a type of pipe fitting which is T-shaped having two outlets, at 90¡ã to the connection to the main line. It is a short piece of pipe with a lateral outlet. A tee is used for connecting pipes of different diameters or for changing the direction of pipe runs. They are made of various materials and available in various sizes and finishes. They are extensively used in pipeline networks to transport two-phase fluid mixtures.

The Stainless Steel 304 Pipe Fittings are also strong. They have 205MPa minimum yield strength and 515MPa minimum tensile strength.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

We are a manufacturer of stainless steel 304 butt welded pipe fittings, offering a variety of constructions, styles, details, evaluations and sizes, each fitting to meet industry needs. The stiffness of 75 ksi ensures unparalleled finesse, with a high enough stack load limit to work at a stable weight.

2205 is the most widely used duplex (ferritic/austenitic) stainless steel pipe fittings. It is used due to its excellent corrosion resistance and high strength. Duplex S31803 fittings offer a better guarantee of corrosion resistance, but most duplex S31803 currently produced also complies with duplex S31803. 1.4462 belongs to the DUPLEX steel series. This steel has higher corrosion resistance than eg austenitic 1.4404. Therefore, the tensile yield point is about 150% higher.

Elbow A234 WPB are devided into two categories which define the distance over which they change direction.

Stainless steel 310S differs from wrought iron, which contains little or no carbon, which also has variations and combinations of production routes. Stainless Steel 310 End Cap Butt Weld Fitting is an iron and carbon alloy containing less than 2% carbon and 1% manganese and small amounts of silicon, phosphorus, sulfur and oxygen.

ASTM A234 WPB Fittings are made up of different material grades.ASTM A234 WPB WPC WP5 WP9 WP11 WP22 Fittings Specification
ASTM A234 (ASME SA234) is standard specification of carbon and alloy steel pipe fittings for moderate and high temperature services.

ASTM A420 covers elbow, tee, reducer, cap, union and etc, which manufactured according to ASME B16.9, ASME B16.11, MSS SP-79 and MSS SP-95, types in seamless and welded structual pipe fittings.