75mm per kg 420 30mm 16mm diameter 316 astm a479 stainless rod steel round bar

Applications for 410 stainless steel rods are valve and pump parts, fasteners, cutlery, turbine parts and bushings.

Stainless steel bars or rods are used in a variety of applications and are widely used in the construction industry due to their durability and resistance to corrosion and rust.
We stock bars and rods in diameters ranging from 3mm to 76.2mm, lengths up to 3m and available in 3 metal grades.
303 – has good corrosion resistance, can be freely processed, not suitable for welding or forming.
304 – has good corrosion resistance, suitable for forming and welding, general machining.
316 – is our highest grade, has excellent corrosion resistance, is suitable for forming and welding, but is slightly more difficult to machine.

At HT PIPE, we stock SS bar products ranging from general purpose 304 and 316 stainless grade alloys to less common options. Additionally, our stainless steel bar products can be cut to the exact specifications of your project.

Our stainless steel round bar stock ranges from 1/8¡± to 24¡± diameter. We are the industry leader in long bar stock ranging from 20′-24′ R/L. This means we are able to supply stainless steel for projects requiring lengths longer than the industry standard 12′. The long length also provides flexibility in part length, often leaving excess scrap on the standard 12′ length.

Another advantage of grade 304 stainless steel bar over grade 303 is that it is slightly harder and has better corrosion resistance. Because of this, grade 304 stainless steel bar is used in large quantities in the manufacture of fasteners and fixtures such as nuts, bolts, washers, clips, fittings and clamps. Products made from grade 304 stainless steel in the fastener industry are often referred to as “A2”.

The high strength and corrosion resistance of AL6XN alloys make them a better choice than traditional duplex stainless steels and a cost-effective alternative to more expensive nickel-based alloys, which offer excellent formability, weldability, strength and Corrosion resistance.

Low temperature resistance properties of stainless steel bars
Low temperature resistance is measured by ductility or toughness at subzero temperatures. At low temperatures, the tensile strength of austenitic stainless steels is significantly higher than ambient temperature. They also maintain excellent toughness. Ferritic, martensitic and precipitation hardening steels should not be used at sub-zero temperatures. The toughness of these grades drops significantly at low temperatures. In some cases, this drop occurred near room temperature.

A479 is a specification for bars and rods produced in several grades of austenitic, ferritic, duplex or simply austenitic-ferritic and martensitic stainless steels. Since this designated stainless steel A479 round bar can be produced in any of the above grades, it can be heat treated differently.

All stainless steels are iron-based alloys containing at least about 10.5% chromium. The chromium in the alloy forms a self-healing protective transparent oxide layer. This oxide layer makes stainless steel corrosion resistant. The self-healing nature of the oxide layer means that corrosion resistance remains the same regardless of the manufacturing method. Even if the surface of the material is cut or damaged, it will heal itself and remain corrosion resistant. Conversely, plain carbon steel can be protected from corrosion by painting or other coatings such as galvanizing.

304 Stainless Steel Round Bar, the most widely used stainless and heat resistant steel 304 has good corrosion resistance to many chemical corrosive agents as well as industrial environments.

Stainless Steel 316 or 316L SS is a chromium-nickel stainless steel with the addition of molybdenum for improved corrosion resistance and mechanical properties. It is non-magnetic in the annealed state and cannot be hardened by heat treatment.

Hardening properties of stainless steel
The advantage of work-hardenable grades of stainless steel is that the strength of the metal can be significantly increased simply by cold working. A combination of cold working and annealing stages can be employed to impart a specific strength to the manufactured part. A typical example is wire drawing. The wire used as the spring will be work hardened to a specific tensile strength. If the same wire is used as a bendable tie wire, it is annealed, resulting in a softer material.

The absolute roughness of hot rolled stainless steel round bars is higher than that of drawn bars. This is not a problem when rebar is only used for strength and corrosion resistance properties. But when the bar is used for aesthetic applications and outdoor fixtures, cold drawn stainless steel round bar is preferred because of its smooth surface and less absolute roughness. Bars can also vary in size. Typical range is 5mm to 450mm radius.

The 316L Round Bars are made up of the low carbon version of the 316 grade stainless steel alloy. It has a maximum carbon content of only 0.03%, whereas it is 0.08% for the 316 grade ss. The 316L ss round bars offers better corrosion resistance and is more suitable for high temperature applications.

We have a large selection of stainless steel rods for sale, ranging in diameter from 3mm to 152mm. We supply stainless steel rods in standard lengths of about 3 meters, but we can also cut rods up to 5 meters for you. We offer stainless steel bars in grades 304 and 316. Grade 304 is a general purpose grade and is ideal for welding. Grade 316 has excellent corrosion resistance. Therefore, it is often used outdoors, or in particularly harsh environments such as marine environments.

ASTM A276 is a specification that considers various categories of stainless steel bar or bar produced in different forms. Stainless steel A276 threaded rods are available and supplied in many conditions.

Although stainless steel construction has been around since the 60s, it is only in recent decades that the industry has shown great interest. The main reasons are small quantity, irregular consumption, small supply, long delivery time, high price and little knowledge of materials. HT PIPE focused on these market deficiencies in the early 90s and achieved some significant changes by strengthening the supply network and introducing new manufacturing techniques. Today, HT PIPE is a well-known supplier and shareholder of stainless steel structural profiles and stainless steel bright strips.

A sharp tool is required, and the correct speed and feed are very important – taking care to ensure the cut is deep enough to clear the surface is a must, as excessive contact can harden the material.

This rod is also known as a stainless steel rod. The application of the bar depends on the requirements of the application and the grade of the material. There are different specifications that also specify production and application types. ASTM A276 Stainless Steel Bar is the specification for hot rolled and cold drawn bar, except for forged bar. It can have different shapes like circle, square, hexagon and other extruded shapes.

Steel bars are one of the core components of any manufacturing
industry or for that matter any industry that relies on machineries.
Thanks to its versatile applications, steel bars find itself in the
epicenter of most of engineering industries, be it automotive, textile,
fabrication, construction, cement, ship building, paper and pulp,
defence, heavy earth moving equipments or aerospace.
The overwhelming popularity of steel bars is owed to the fact that
it is possible to be produced in varying types, shapes, sizes, and
grades of bars to cater the exact technical requirements. Steel
bars generally have the shapes such as flat, round, hexagonal,
square and channel and on most of the occasions, it is the shape
of the bar that defines its application area

Excellent oxidation resistance under mild cycling conditions at 2000¡ãF is characteristic of 310. Due to its high chromium and moderate nickel content, 310 has good resistance to sulfidation and other forms of hot corrosion. 310 is widely used in moderate carburizing atmospheres, such as petrochemical environments.

904l Stainless Steel Round Bar It can be categorically said that rebar is one of the core components of any manufacturing industry or any industry that relies on machinery. Widely used in automotive, textile, manufacturing, construction, cement, shipbuilding, paper and pulp, defense, heavy earthmoving equipment or aerospace.

321 Stainless Steel Square Bar It can be categorically said that rebar is one of the core components of any manufacturing industry or any industry that relies on machinery. Widely used in automotive, textile, manufacturing, construction, cement, shipbuilding, paper and pulp, defense, heavy earthmoving equipment or aerospace.

Grade 316L is a low carbon version of grade 316 stainless steel with increased resistance to surface corrosion and can be used in the same temperature range. It is also more commonly used in applications that require large size components to be welded. Although the 316/316L is widely considered the default choice for applications requiring marine grade products, it has reduced performance in warm salt water.

Certain types of equipment, such as medical machinery, are very sensitive to even low levels of magnetism, so it is important to source the correct type of stainless steel bar and bar for these critical environments. So 304, 304l, 316, 316l and 347 are excellent choices.

Considered for applications involving boiler and pressure vessel construction, martensitic grade SS A479 Type 410 bar offers good corrosion resistance in addition to its high strength and hardness properties. On the other hand, grade 316 ASTM A479 forged bar is the best choice for marine applications.

The standard for ASTM A276 specification covers both, hot -finished or cold-finished stainless steel bars with the exception of re-forged bars. The ASTM A276 Type 304 is one of the most commonly used and versatile grades of stainless steel.

This stainless steel round bar is very weldable. Strength, corrosion resistance and simplified manufacturing can make it a cost-effective alternative to high strength carbon steel and other stainless steel grades.

Grades 303 and 304 are interchangeable in many cases, but the composition of each grade is slightly different, making either of them the obvious choice for certain applications.

About the hot strength of stainless steel bars
Austenitic grades maintain high strength at elevated temperatures. This is especially true for grades with high levels of chromium and/or silicon, nitrogen and rare earth elements such as grades 310 and S30815. High chromium ferritic steels like 446 can also exhibit high hot strength. The high chromium content of stainless steel also helps resist scaling at high temperatures.