90 deg elbow sch80 welded nickel alloy pipe fitting elbow incoloy 800

Used in chemical and petroleum processing, in power plants for superheater and reheater tubing, in industrial furnaces, and for heat treating equipment.

ASTM A403/ A182/ A240 and ANSI B16.9/16.28/ B16.25/ MSS SP-43. 316/316L is a nickel-chromium stainless steel alloy to which copper and molybdenum have been added. It is a non-magnetic austenitic stainless steel, so it is especially useful in severely corrosive conditions.

The strength of 800H is achieved by controlled levels of carbon, aluminum and titanium along with a 2100¡ãF minimum anneal to achieve a grain size of ASTM 5 or coarser.

Duplex steel butt welded fittings are weldable fittings that can change flow direction, branch, reduce pipe size, or connect additional equipment. It has high mechanical strength and high resistance to stress corrosion cracking. This is also the result of alloying with nitrogen.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

317L stainless steel 180 degree elbow has very high corrosion resistance, but it is getting more and more expensive. The products we offer are known throughout the world for their reliability and quality.

316 stainless steel pipe bend has excellent corrosion resistance in many environments. It gives good service in atmospheric conditions, resisting most environments and is often used in marine conditions, or where industrial pollution is heavy.

Incoloy 800 is an alloy of Nickel, Iron, and Chromium alloy with high strength and excellent resistance to oxidation and carburization in high-temperature exposure. Incoloy 800H and 800 HT are also Nickel, Iron, and Chromium alloy which is used for high-temperature structural application. Incoloy 800HT has further modifications to the combined titanium and aluminium levels which ensures excellent high-temperature properties.

It exhibits excellent corrosion resistance due to its high chromium, molybdenum and nitrogen content. They are highly resistant to pitting and crevice corrosion even in oxidizing and acidic solutions. Duplex 2205 butt welded pipe fittings are resistant to chloride stress corrosion cracking at temperatures of approximately 150 degrees Celsius. Due to the presence of ferrite in duplex UNS S31803 fittings, they exhibit good performance in corrosive environments and provide good weldability.

Stainless steel is an alloy of iron that is resistant to rusting and corrosion. It contains at least 11% chromium and may contain elements such as carbon, other nonmetals and metals to obtain other desired properties. Stainless steel’s resistance to corrosion results from the chromium, which forms a passive film that can protect the material and self-heal in the presence of oxygen
Completely and infinitely recyclable, stainless steel is the ¡°green material¡± par excellence. In fact, within the construction sector, its actual recovery rate is close to 100%.
Stainless steel is also environmentally neutral and inert, and its longevity ensures it meets the needs of sustainable construction. Furthermore, it does not leach compounds that could modify its composition when in contact with elements like water.
Stainless steel must contain at least 10.5 percent chromium. Depending on the grade, it may contain much higher chromium levels, and additional alloying ingredients like molybdenum, nickel, titanium, aluminum, copper, nitrogen, phosphorous or selenium.
In addition to these environmental benefits, stainless steel is also aesthetically appealing, extremely hygienic, easy to maintain, highly durable and offers a wide variety of aspects. As a result, stainless steel can be found in many everyday objects. It also plays a prominent role in an array of industries, including energy, transportation, building, research, medicine, food and logistics.

A versatile alloy, the main reason manufacturers use these stainless steel 304 butt weld joints is their great resistance to general corrosion. Uniform corrosion, or general corrosion, is a common problem in plants where components are exposed to air.

304 and 304L are austenitic alloys, which means that iron carbide or a non-magnetic solid solution of carbon in iron is used to impart corrosion resistance to this stainless steel. We manufacture stainless steel 304/304L forged fittings in socket weld and threaded forms as well as stainless steel 304/304L elbows in standard and non-standard sizes with bend radii from 1D to 10D. We offer stock delivery of Stainless Steel 304/ 304L Fittings, Stainless Steel 304/ 304L Flanges and Stainless Steel 304/ 304L Bends in a variety of standard sizes and types.

Inconel 601 (UNS N06601 ) nickel-based alloy density: 8.42 g/cm3 (grams/cubic centimeter).

Butt weld elbows in the Incoloy 825 series are one of the strongest and most versatile elbows types. These fittings can be easily attached to pipe because they have beveled ends that meet ASME B16.25. These elbows allow the module to create full penetration welds without any additional penetration or preparation. The fittings are welded according to the butt welding procedure, placing them on the assembly and welding in place. Welded connections in this range provide a strong and high-strength connection. These fittings are available in larger and stronger sizes compared to other grades of fittings.

304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel.When it comes to uses, SS304 can be found in kitchen sinks and other appliances such as toasters and microwave ovens. SS304 is also used to make pressure vessels, wheel covers as well as for building facades.

WPB is the most commonly used carbon steel pipe fitting material for medium and high temperature application now, it can be made by steel pipe like ASTM A106 Gr.C or steel plate like ASTM A285 GR.C.

These fittings are produced from the highest quality raw materials and are well tested and inspected according to national and international standards. Manufacturers offer a full range of pipes and fittings such as UNS S32205 45 degrees. Elbow, Duplex UNS S31803 Reducer, Duplex S31803 Cap, Duplex S31803 Butt Weld Fitting, 2205 Duplex 90 Degree Elbow, Duplex S32205 Butt Weld Fitting, Duplex S32205 Fitting.

800H can resist corrosion of many corrosive media. Its high nickel content makes it resistant to stress corrosion cracking in aqueous corrosion conditions. The high chromium content provides better resistance to pitting and crevice corrosion cracking. The alloy has good corrosion resistance to nitric acid and organic acids, but limited corrosion resistance in sulfuric acid and hydrochloric acid. Good corrosion resistance in oxidizing and non-oxidizing salts, in addition to the potential for pitting corrosion in halides. It also has good corrosion resistance in water, steam and mixtures of steam, air and carbon dioxide.

A pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction
or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

These caps provide a safe cushion against any type of cracks, chips and cracks on the pipes. We offer 1-8 in female pipe fittings duplex 2205 pipe cap.

The addition of copper and molybdenum to DIN 1.4301 fittings produces pitting and crevice corrosion, as well as resistance to adverse environments. It seems to fall into the Flawless and Nickel categories as it has its own characteristics. It is an austenitic metal used for sulfuric acid packaging. It has excellent corrosion resistance to sulfuric acid.

1.4529 German numeral code. Is a super duplex stainless steel, the main components: 20Cr-25Ni-6Mo-1Cu-0.2N corresponding to the United States: N08926, 254SMo…
1.4529 (UNS N08926) has very high resistance to pitting and crevice corrosion in halide media and in acidic environments containing sulfur and hydrogen
It can effectively resist chloride ion stress corrosion, and also has good corrosion resistance and good stability in oxidizing and reducing media.
The mechanical properties are slightly better than 904L, and it can be used in the manufacture of pressure vessels from -196 to 400 ¡ãC.

Nickel 201 fittings have good corrosion resistance to a wide range of acids and bases. These accessories have been found to be useful in conditions containing reducing agents. Like alloy grade 200, Nickel 201 caps are significantly resistant to caustic, especially in molten conditions. Its alkali resistance makes this alloy beneficial if it is used in the manufacture of viscose rayon.

ASTM A234 WPB Elbow is a standard specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel suitable for for Moderate and High Temperature Service.

We are manufacturing buttweld seamless and welded Stainless steel 304/ 304L fittings, Stainless steel 304/ 304L flanges and Stainless steel 304/ 304L pipe bends in accordance with ANSI/ASME and DIN standards.

These stainless steel pipe fittings have excellent corrosion resistance and dimensional accuracy along with close tolerances. Our range of pipe fittings include butt weld pipe fitting & instrumentation and ferrule fitting are offered in different sizes, we also provide customization as per the requirements of clients.

Incoloy 800, 800H and 800HT have nearly identical chemical composition and physical properties.

The Carbon Steel A234 WPB Smls Reducer is a seamless product that reduces the diameter of the pipeline.Unless specified for carbon steel plates or sheet, the steel may be made to either coarse grain or fine grain practice. Which ASTM A234 WP9 shall be made to fine grain practice.

We manufacture Alloy 825 tubing for use in pollution control tools, oil piping and gas equipment. In addition, they are used in the power generation, petrochemical and pharmaceutical industries.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.