90 deg long radius nickel alloy pipe fittings weld elbow incoloy 800

We offer tees like ANSI B16.9 alloy UNS N08020 with good machinability and can be painted with different finishes to enhance their surface quality as required. ASTM B366 Alloy DIN 2.4660 Welded Fittings Eliminate Corrosion in Chemical, Shipbuilding, Food and Beverages. We are also an exporter of ASTM SB366 Alloy 20 Seamless Pipe Fittings for non-corrosive use in oil rigs.

We also accept all orders of CS Elbow A234 WPB up to and including 90 degree to suit your requirements.

Stainless grade S31254 is a very high-end austenitic stainless steel.
Grade S31254 is reported to be a cost-effective alternative to high nickel and titanium alloys for some applications.

Available in both 304 and 316L stainless steel alloys. This product is manufactured in accordance with 3A Standards for use in sanitary line processing including food, beverage, and pharmaceutical industries.

ASTM A403/ A182/ A240 and ANSI B16.9/16.28/ B16.25/ MSS SP-43. 316/316L is a nickel-chromium stainless steel alloy to which copper and molybdenum have been added. It is a non-magnetic austenitic stainless steel, so it is especially useful in severely corrosive conditions.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

S31803 is the Unified Numbering System (UNS) designation for the original duplex stainless steel. The UNS system was created by multiple trade groups in the 1970s to reduce confusion when the same alloy was called different things, and vice versa. Each metal is represented by a letter followed by five numbers, where the letter represents the metal series, i.e. S for stainless steel.

For paper mill applications requiring lower alloy grades that do not have sufficient corrosion resistance. Based on a 22% chromium content, they have a combined austenitic:ferritic microstructure that provides greater strength, corrosion resistance and cost-effectiveness.

The UNS S31803 (ASTM F51) specification has been largely superseded by UNS S32205 (1.4462, ASTM F60). This reflects their desire to maximize the alloy’s corrosion properties, thanks to the development of the AOD steelmaking process, which allows for tighter control of composition. In addition, it allows to influence the nitrogen addition level rather than just being present as a background element. Therefore, the highest performing duplex grades seek to maximize the content of chromium (Cr), molybdenum (Mo) and nitrogen (N).

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Nickel Alloy 600, also sold under the brand name Inconel 600. It is a unique nickel-chromium alloy that is known for its oxidation resistance at higher temperatures.

Ordinary steel fittings are susceptible to chloride stress corrosion cracking. However, ASME SA815 Duplex Pipe Reducers are better because they inhibit deformation and avoid corrosion cracking even at high temperatures. UNS S31803 Duplex Steel Tee is said to have amazing resistance to toxicity and elasticity, so it is used in the gas desulfurization industry. WERKSTOFF NR. 1.4462 end caps are highly resistant to intergranular corrosion and are therefore used for termination connections.

The higher strength results from close control of carbon, aluminum, and titanium contents in conjunction with a high temp anneal.

304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel.When it comes to uses, SS304 can be found in kitchen sinks and other appliances such as toasters and microwave ovens. SS304 is also used to make pressure vessels, wheel covers as well as for building facades.

316 stainless steel pipe bend has very low responsiveness to magnetic fields. Unlike basic stainless steels, which are ferromagnetic, most stainless steel varieties (including 316) are austenitic ¡ª or effectively nonmagnetic.

A high nickel alloy with the addition of substantial amounts of copper to give the alloy excellent resistance to sodium chloride solutions, including brine and seawater. Therefore, UNS N04400 Alloy 400 Forged Fittings and Socket Weld Elbows can be used as part of an offshore piping system that may require a change of direction.

We also produce Carbon Steel ASTM A234 WPB Threaded elbows with all male connections, all female or a combination of each.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

In addition to the properties of 304, 316 stainless steel long and short tube ends have increased corrosion resistance due to the addition of molybdenum to their composition. There are duplex steel short end flanges and fittings.

MONEL K500 retains the excellent corrosion resistant characteristics of 400 and has enhanced strength and hardness after precipitation hardening when compared with 400.

These A234 WPB SCH 80 Elbow are also available in a wide size range. The purpose to use a ASTM A234 gr WPB elbow is to change direction or flow in a piping system.

Duplex 2205 fittings must be cooled to room temperature as soon as possible after being processed by thermoforming. This is what has to be done in order to avoid precipitation of intermetallic or especially so-called sigma phases. The presence of this sigma phase in UNS S31803 dual-phase steel elbows is detrimental to the alloy because, in addition to the corrosion resistance of the material, it greatly reduces properties such as impact resistance at room temperature.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

800H is commonly welded using RA82 (ERNiCr-3) bare wire for applications under 1450¡ãF.

The S31803 is used in many programs in unique industries such as superheaters, boilers, condensers, heat exchangers, chillers, coolers/intercoolers, etc. They are also used in unique industries such as fertilizer plants, oil refineries, steel mills, sugar industries, and more. Duplex WNR 1.4462 Forged Socket Weld Hex Plus Fittings done by run mode and follow steps to complete important radii with buyer drawing.

They are used in different applications with different purposes. ASTM A403 WP316 Elbow is used to change the direction of the pipe. When the elbow is made of 316 steel, it can be used in chloride-rich marine applications. Elbows can have different lengths and angles.

There is a complete solid solution between nickel and copper. The wide solubility range between iron, chromium and nickel enables many alloy combinations. There are many different stainless steel grades in this category with their unique properties and performance in different conditions and environments.

Adapters and fittings for stainless steel, carbon steel and other materials for oil and gas, petrochemical, power, pulp and paper and other applications. As a supplier of stainless steel and carbon steel pipe fittings, we provide industrial pipe fittings to meet your project needs.

Titanium rapidly starts to react with oxygen molecules at around 1,200 ?C, and it can exhibit the same behavior at a reduced temperature of 610 ?C when the oxygen is in pure form.

Nickel in elemental form or in alloys with other metals and materials makes a significant contribution to society today and is expected to continue to provide materials for a more demanding future. Nickel is a versatile element that forms alloys with most metals.

There are seamless and welded A234 WP9 pipe fittings,the seamless A234 WP9 pipe fittings are manufactured from seamless steel pipes A335 P9,welded A234 WP9 pipe fittings mean they are made from welded pipes or steel plates.Studying the market demands, we deliver quality products that are sustainable. Our products are 100% certified.

Since 2008, due to the excellent corrosion resistance of dual-phase steel butt-welded pipe fittings, the market has been in high demand. It resists intergranular and crevice corrosion. It also shows significant pitting resistance. Chloride stress corrosion cracking is also easily handled with Duplex 2205 at 150 degrees Celsius.