90 degree elbow female threaded nickel alloy pipe fitting elbow incoloy 800

A equal tee is the most common pipe fitting. It is used to either combine or split a fluid flow. It is a type of pipe fitting which is T-shaped having two outlets, at 90¡ã to the connection to the main line. It is a short piece of pipe with a lateral outlet. A tee is used for connecting pipes of different diameters or for changing the direction of pipe runs. They are made of various materials and available in various sizes and finishes. They are extensively used in pipeline networks to transport two-phase fluid mixtures.

ASTM A403 WP321 pipe fittings mean the pipe fitting which material is Wrought Austenitic Stainless,they are used for the pressure piping systems of moderate and high temperature services.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Furnace rolls made of this alloy were still in good condition after operating for 8700 hours at 2150 Deg. F. Furnace trays, used to support heavy loads, have been exposed to temperatures up to 2300 Deg. F. in an oxidizing atmosphere without bending or warping.

The alloy is used in many fields, especially marine and chemical processing.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Stainless steel reducer tee is widely used in the construction and overhaul of petrochemical, petroleum, liquefied gas, chemical fertilizer, power plant, nuclear power plant, shipbuilding, papermaking, pharmaceutical, food sanitation, urban construction and other industries.

Material is generally 10# 20# A3 Q235A 20g 16Mn ASTM A234 ASTM A105 ASTMA403, tee, outside diameter range of 2.5 “-60”, from 26 “-60” for welding tee.Wall thickness of 28-60 mm.

ASTM A403 WP304 pipe fittings mean the pipe fittings which material is Wrought Austenitic Stainless grade A403 WP304,they are used for the pressure piping systems of moderate and high temperature services.

Monel 400 is a nickel-copper alloy (about 67% Ni ¨C 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions.?Butt-weld and forged fittings are available.Excellent corrosion resistance in many acidic and alkaline environments Especially suitable for reducing conditions. Good ductility and thermal conductivity Ideal for seawater applications.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Large selection of finished and semi-finished stainless steel caps/end caps, crosses, elbows, reducers, tees, stub ends and many other stainless steel butt weld fittings for use in power plants, oil and gas, water treatment, food processing , petrochemical, LNG industry, automotive, heavy engineering, offshore and chemical. We can supply butt welded pipe fittings individually or in conjunction with our other plumbing products.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

It is extensively used in heavy gauge welded components (over about 6mm). There is commonly no appreciable price difference between 316 and 316L stainless steel.

It is well known that ASTM A234 steel pipe fittings are used in pressure piping and pressure vessel fabrication for service in medium and high temperature. Fitting materials in this standard include killed steel, forgings, bars, plates, seamless or fusion welded tubular products with filler metals added.

Stainless grade S31254 is a very high-end austenitic stainless steel.
Grade S31254 is reported to be a cost-effective alternative to high nickel and titanium alloys for some applications.

Alloy Steel Buttweld Fittings is a weldable pipe fitting that allows for change of direction of flow, to branch off, reduce pipe size or attach auxiliary equipment. It has many inherent advantages such as it provides permanent leak proof to the fittings. The continuous metal structure formed between fitting and pipe gives strength to the system. Smooth inner surface and gradual directional changes minimize the action of corrosion and erosion and reduce pressure losses and turbulence. It doesn’t make it any less vulnerable to rust when exposed to the elements since it is ferrous

1 – 4 inch short type t, sanitary stainless steel ASTM A403 WPS31254 is an austenitic chromium alloy which is the make-up of the steel is 18 percent chromium and 8 percent nickel. Stainless Steel 304 Pipe Fittings has high ductility, excellent forming, spinning and drawing properties.

Forged fittings produced in a facility covered by the ASME B16.9 standard must be manufactured in accordance with ASTM A 403. Molybdenum bearing stainless steel 316L fittings are also known as marine grade due to their excellent resistance in marine environments. While the chemical composition of grade 316L is similar to that of grade 316 stainless steel, the main difference between the two alloys is the nitrogen and carbon content.

Monel nickel-copper alloy K-500 pipe bend and elbow combine the excellent corrosion resistance characteristic of Monel alloy 400 with the added advantages of greater strength and hardness.

ASME B366 Incoloy 800 Elbow resists water corrosion at moderate temperatures.

ASTM A403 WP316 Fittings are a grade of pipe fittings that are made up of a high oxidation resistant material. This material is also corrosion resistive, pitting resistive and can withstand strong chemicals and acids. The high temperature and pressure tolerance of this material makes the A403 WP316 Elbow to perform better under the corrosive high pressure curvatures of piping. The corrosion in fluid direction changing joints is high. Due to the impact of the fluid flow, the fitting might break if there was corrosion and or thermal expansion.

The Inconel 600 Pipe Fittings are made with high concentrations of chromium, nickel, and molybdenum. This composition of chemicals gives it excellent resistance against all forms of corrosion and oxidation.

The most advantageous feature of welded joints such as A403 is that they provide additional grip and greater strength at the welded joint. This grade has different types of accessories. There are connectors, elbows, unions, elbows and reducers. All these accessories have their own special applications.

For stainless steel sanitary fittings we offers a large selection of high purity food grade sanitary hose fittings, stainless sanitary tubing, sanitary valves and fittings, steel tubing clamps, etc. Contact us for a sanitary fittings price list.

ASTM A234 WP9 steel pipe fittings mean the pipe fittings which material is ASTM A234 WP9,they are used for the pressure piping systems of moderate and high temperature services.Among the global industrialists that product is highly appreciated because of various outstanding attributes that it possesses.

ASTM B 366 Hastelloy C276 Welded Outlets are used for butt welded branch connections where the pipeline is in critical/high pressure service. It is designed to minimize stress concentrations and provide overall reinforcement.

The combined effects of mechanical and thermal processing of Incoloy Alloy 800HT permit higher design stresses to be incorporated than are permitted for the conventional Alloy 800H.

Stainless Steel 347 Fitting is an austenitic stainless steel with a nominal composition of 17% Chromium and 7% Nickel with good strength and ductility when cold worked.

Duplex UNS S31803 Tee Fittings have high general corrosion resistance. Duplex UNS S31803 Cross Fittings provide good weldability in thick plates. Duplex UNS S31803 Reducer Fitting is a duplex stainless steel with a 50/50 austenitic, ferritic microstructure.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.