90 degree elbow schedule 80 steel pipe fittings elbow incoloy 800

UNS S31803 fittings are composed of duplex stainless steel with equal amounts of austenitic and ferritic microstructures. UNS S31803 fittings are two-phase, ferritic, austenitic, 22% chromium, 3% molybdenum, 5 to 6% nickel alloy stainless steel.

317L stainless steel 180 degree elbow has very high corrosion resistance, but it is getting more and more expensive. The products we offer are known throughout the world for their reliability and quality.

Monel 400 is widely used in Feed water and steam generator tubing.

These A234 WPB SCH 80 Elbow are also available in a wide size range. The purpose to use a ASTM A234 gr WPB elbow is to change direction or flow in a piping system.

Monel 400 is a nickel-copper alloy (about 67% Ni ¨C 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions.?Butt-weld and forged fittings are available.Excellent corrosion resistance in many acidic and alkaline environments Especially suitable for reducing conditions. Good ductility and thermal conductivity Ideal for seawater applications.

316 pipe bend is primarily used in construction and infrastructure because it is strong, resistant to pitting, and corrosion resistant in most circumstances.

HASTELLOY(r) B-2 is a wrought nickel-molybdenum alloy that can be used in the ¡®as welded¡¯ condition.

We supply Stainless Steel 316H Elbow Pipe Fittings to a variety of customers including fabricators of pressure vessels, industrial boilers and heat exchangers. Fusion welding performance for Stainless Steel 316H Reducer Pipe Fittings is excellent both with and without fillers. Stainless Steel 316H Tee Pipe Fittings, with its higher carbon content has application at elevated temperatures, as does the stabilised grade 316Ti.

SS 316L seamless pipe fittings possess greater durability under pressure and higher aesthetic appeal than its less expensive welded counterpart.

However, titanium can lose its strength at temperatures greater than 430?C because it is not as hard as high grades of steel.

ASTM A860 WPHY 52 Fittings are made up of a high yield carbon steel with carbon, manganese, sulfur, phosphorus, silicon, nickel, chromium, molybdenum, copper, titanium, vanadium and cobalt in the composition.The increased durability ensures a long work life, therefore proving that the A860 WPHY 52 elbow is a cost saving solution.

Monel 400 is a nickel-copper alloy (about 67% Ni ¨C 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions.?Butt-weld and forged fittings are available.Excellent corrosion resistance in many acidic and alkaline environments Especially suitable for reducing conditions. Good ductility and thermal conductivity Ideal for seawater applications.

ASTM B366 N08825 Incoloy 825 fittings provide smooth operation at high temperatures. Our Incoloy 825 Elbow is used in a wide variety of industries due to its corrosion resistance properties in oxidizing and reducing environments.

A234 WP9 carbon steel pipe fittings are widely used in many different industries. Alloy Steel A234 Gr. WP9 Buttweld Pipe Fittings are a type of pipe fitting made from carbon steel material, which is strong, durable, and resistant to corrosion. These Alloy Steel WP9 Butt weld Pipe Fittings are commonly used for connecting pipes and fixing them into place. ASTM A234 WP9 Pipe Fittings can be used for both small and large-scale projects, making them incredibly versatile and useful.

ASTM A403 WP321 is a titanium stabilized austenitic stainless steel with good general corrosion resistance. It has excellent resistance to intergranular corrosion after exposure to temperatures in the chromium carbide precipitation range of 800¨C1500¡ãF (427¨C816¡ãC). The alloy resists oxidation to 1500¡ãF (816¡ãC) and has higher creep and stress rupture properties than alloys 304 and 304L. It also possesses good low temperature toughness.

Corrosion resistance of duplex steel radius fittings provided. Comparable to standard austenitic grades or high alloyed ferrites. Although duplex steels have good high temperature oxidation resistance like other duplex stainless steels, embrittlement can occur even at temperatures above 300 degrees Celsius for short periods of time. In case of embrittlement, duplex steel stub joints can only be corrected by a complete solution annealing treatment.

Super duplex UNS S32750 Buttweld Fittings has a low carbon content which lowers the risk of carbide precipitation in the grain boundaries during the heat treatment. They are highly resistant to crevice corrosion due to high chromium and molybdenum content of UNS S32750 Super Duplex Pipe Fittings makes it extremely resistant to uniform corrosion by organic acids such as formic and acetic acid.

Sanitary elbows are typically made of the stainless steel grade 304 or 316 to provide a sterile and corrosion-free surface.

The alloy is not precipitation hardenable; it is hardened and strengthened only by cold work. The versatility of INCONEL alloy 600 has led to its use in a variety of applications involving temperatures from cryogenic to above 2000¡ãF (1095¡ãC).

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Monel 400 is a nickel-copper alloy (about 67% Ni ¨C 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions.?Butt-weld and forged fittings are available.Excellent corrosion resistance in many acidic and alkaline environments Especially suitable for reducing conditions. Good ductility and thermal conductivity Ideal for seawater applications.

Titanium, zirconium, and silica all belong to the first transition group in the periodic table.

Type 304 stainless steel is a T 300 Series Stainless Steel austenitic. It has a minimum of 18% chromium and 8% nickel, combined with a maximum of 0.08% carbon. It is defined as a Chromium-Nickel austenitic alloy.304 stainless steel is used for a variety of household and industrial applications such as food handling and processing equipment, screws,[3] machinery parts, utensils, and exhaust manifolds. 304 stainless steel is also used in the architectural field for exterior accents such as water and fire features. It is also a common coil material for vaporizers.

Duplex fittings have medium performance. However, the mechanical properties of duplex steels are much higher compared to austenitic alloys such as 304. What makes this material a cost-effective alternative is that the nickel content that manufacturers use to produce dual-phase steel butt-welded pipe fittings is lower than that of super-duplex steel.

Stainless steel grade 317L is a low carbon version of grade 317 stainless steel.Our Stainless Steel 317/317L Pipe Elbow are available in several end types, like threads, bevelled ends, bended, seamless, etc. and in different diameters and thicknesses.

Short elbows are widely available and are typically used for pressurized systems in physically tight locations.

We’ll do our greatest to fulfill your specifications and are sincerely searching ahead to developing mutual helpful small business marriage with you! Since improving the technical grade and quality level of products reflects the value of the company and is also a social responsibility, we will continue to move forward with the essence of the corporate culture of rigorous and realistic, scientific and technological innovation.

This combination makes the material resistant to corrosion and high temperatures up to 889 degrees Celsius. 304 stainless steel butt weld fittings meet standard ASTM A403 and are available in outside diameters from ?” to 48″. For seamless fittings, diameters range from ? to 10 inches.

Monel 400 (also known as alloy 400) is an attractive option for industries where corrosion resistance is of the highest priority.

S32750 (2507) is a duplex stainless steel that combines many of the excellent properties of ferritic and austenitic steels. Due to its high chromium and molybdenum content, it exhibits excellent resistance to pitting, crevice and uniform corrosion. The two-phase microstructure ensures that the steel has high resistance to stress corrosion cracking and high mechanical strength. In addition, it also has the characteristics of strong resistance to chloride pitting, high thermal conductivity and low thermal expansion coefficient.