90 street elbow

For industrial purposes, in pipeline systems, we usually need to change the direction of transmission; regulate the flow of fluids (oil and gas, water, mud); open or close pipelines, etc. Therefore, to accomplish these activities, steel pipe fittings will be applied.

Inconel 800 forms a thick yet stable oxide layer. This thick layer is known to protect the outer surface of the Inconel 800 component from further attack.

NAS625 (NCF625, UNS N06625) is a nickel-chromium-molybdenum alloy with an additional of niobium. Matrix stiffening provided by molybdenum and niobium results in high strength. The alloy resists a wide range of severe corrosion environments. It also offers resistance to high temperatures. It also demonstrates remarkable protection against corrosion and oxidation. Its ability to withstand high stress and a wide range of temperatures, both in and out of water, as well as being able to resist corrosion while being exposed to highly acidic environments makes it a fitting choice for nuclear and marine applications.

Hastelloy C276 is resistant to localized corrosion such as pitting and stress corrosion cracking.

We offer sockets, steel sockets, stainless steel sockets, nickel alloy sockets, copper alloy sockets, duplex steel, carbon steel sockets and alloy steel sockets.

Stainless steel tee is a common butt welded pipe fitting and an important part of the piping system. According to the diameter of the outlet, there are two types of pipe fittings: equal diameter tee and reducing tee. Equal diameter tee, also known as straight tee, has the same outer diameter of the three water outlets.

This type of metal is able to withstand high temperatures, which makes it a good choice for industrial applications. It is also strong, durable, and rust-proof. Aside from being corrosion-resistant, stainless steel 304 has a high level of ductility and weldability.

Cu-Ni forged threaded fittings are usually supplied as redrawn tubes in the annealed condition. The combination of good ductility and strength provides excellent formability. In addition to this, these forged fittings are also resistant to rust, oxidation, pitting, stress cracking and crack stress.

Inconel 800, whose chemistry forms over 50% of nickel is known to be more expensive than the former.

To recover the inherent corrosion resistance of stainless steel castings. The corrosion resistance of stainless steel decreases after investment casting. The corrosion resistance of stainless steel castings recovered to the optimum state after solution treatment.

The use of branch fittings instead of conventional fittings (buttweld tee, reinforcing pads and saddles) has the following advantages (example Weldolet):

Just 2 welds are needed, instead of 3 (less work and weld inspections)
Accelerated installation time
Less space is required, making the piping system design more flexible
The flow is fully unrestricted, due to the funnel design

In simple terms, a steel pipe elbow is a pipe fitting connected between two pipes. The main purpose is to change direction. As we all know, steel pipe elbows can be divided into different degrees, generally there are 45-degree steel pipe elbows, 90-degree steel pipe elbows and 180-degree steel pipe elbows. Other angles such as 60¡ã or 120¡ã are also available for piping systems in case of special requirements.

Alloy 600’s high chromium content makes it significantly more resistant to oxidation than pure nickel, while its high nickel content provides good corrosion resistance under reducing conditions.
This alloy has a high level of resistance to stress and salt water, exhaust gases, and most organic acids and compounds.

Stainless steel takes its name from its ability to resist rusting thanks to the interaction between its alloying components and the environment to which they’re exposed. Numerous types of stainless steel serve a variety of purposes and many overlap. All stainless steels are comprised of at least 10% chromium. But not all stainless steels are the same.

Steel pipe elbow plays a key role in the pipe fittings, which frequently used in different application and available in various shapes and sizes. It connects two pipes with same or different nominal diameters, and to make the pipe turn to a certain direction of 45 degree, 90 degree or 180 degree.

Weldolets are the most popular type of branch fittings, belong to the buttweld fittings family, and are available in a wide range of dimensions.

Pipe plugs are defined as cap end of fractional tubes used in a large number of industries. These pipe plugs are designed to insert into the end of tubing to dead-end the flow. Various materials are used to manufacture high quality tube plugs in a variety of end connections.

A105 shall adhere to tensile strength, yield strength, elongation, reduction of area, and hardness requirements. Guidelines for retreatment, repair by welding, and product marking are given.

Alloy steel is divided into two categories: high-alloy steel and low-alloy steel. Low alloy steel forged fittings, on the other hand, contain about 0.05 ¨C 0.25% carbon and up to 2.0% manganese.

90 degree elbow with female National Pipe Taper (NPT) threads for changing the direction of flow between two pipes. Our high quality standard Class 150 stainless steel threaded fittings are manufactured to the highest standards.

Bushings, also known as sleeve bearings, are just one specific type of bearing. They slide on the rod to provide extremely low friction movement. They are ideal for shock absorption and minimise energy consumption, noise and wear.

Nickel fittings are manufactured through a hot or cold forming process, which means it can be bent and formed into the correct shape.

A105 Forged Steel Fittings can be ordered to meet the customer requirements by getting them customised according to the instructed dimension . The ASTM A105 Fittings Dimensions are also available as per industry standards such as MSS, ASME and API specification. The A105 Forged Fittings specification are has a limit of up to 10,000 lbs.

Stainless steel pipe fittings are made of stainless steel, which is an alloy. Stainless steel is highly corrosion resistant and durable. It has low temperature toughness and high temperature resistance. It can be easily manufactured and retrofitted. There are several grades of stainless steel, but the most commonly used grades are 304, 316 and 316L.

A105 is considered a type of forging carbon steel grade.

With the specification acting as a guide, it is required that the material follow some requirements. Along with the tensile and yield strength, the ASTM A105 Elbow must adhere to the requirements of the specification for details such as reduction of area, elongation, and hardness requirements.

Stainless Steel is a corrosion-resistant steel alloy with different grades and surface finishes. Stainless Steel 304 Forged Pipe Fittings are lightweight and easy to install. They are also corrosion and abrasion-resistant.

The pipe fittings of special shape or those not suitable for die forging can be manufactured by free forging process.The rough shape of pipe fitting should be forged by free forging; If the tee, should be forged out of the branch pipe.

Nickel is so important that nickel-containing grades make up 75% of stainless steel production. The best-known of these are Type 304, which has 8% nickel and Type 316, which has 11%.

This alloy is not suitable for highly oxidizing acids such as nitric acid and nitrous acid. It is resistant to sulfuric acid up to 80% and hydrochloric acid solutions up to 20%.

Incoloy 800 may be also used for applications such as wet scrubbing, and the reactive atmospheres of furnaces as well as in industries like nuclear fuel.