A105 coupling carbon steel pipe fittings weight exported to Malaysia

This grade of the fitting is used in constructions for use in pressure piping and pressure vessel service at low temperature. Also, this fitting is available in two types in welded and seamless.

It is mainly used for welded pressure vessels where improved notch toughness is required.

Some of its applications are power generation, pulp and paper industry, power offshore oil drilling industry, specialty chemicals and pharmaceuticals. Other applications where it is found to be used are condensers, gas handling, chemical equipment, seawater equipment, pharmaceutical equipment and heat exchangers.

These fittings are for use in pressure piping and in pressure vessel fabrication for service at moderate and elevated temperatures.

Most ASTM A694 F52 flange manufacturers state that the flange has enhanced mechanical properties such as its high tensile strength, good heat resistance and corrosion resistance.

Carbon Steel Pipe Fittings are made up of carbon steel which has a limited range of ingredients in its composition. Carbon steels have high hardness and wear and tear properties.

We supply a wide range of precisely engineered ASTM A 105 Carbon Steel Socket Weld Flanges made in compliance with international quality and safety standards.

In seamless fitting form it has size ¡°1/2 to 24¡± and in welded form¡±24 to 96¡± and thickness is available in SCH 10,20,30,40,80,100,120,140,160,XXS. It has dimensions like ANSI/ ASME B16.9, B16.28, MSS-SP-43.

Regardless of the heat treatment applied to the carbon steel alloy, the higher carbon content in the material reduces the weldability of carbon steel fasteners, while also effectively reducing the melting point of the bolt. Most carbon steel studs are generally softer.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Threaded Flange There are different pressure classes such as class 150, 300 and up to 2500 and PN6 through PN64. The A105 Class 300 Flange and below don¡¯t need heat treatment while the higher pressure classes can undergo heat treatment.

Flanges are a type of connections for pipe lines to connect the pipes together.Our Carbon Steel A105 Slip On Flanges are meant for non-critical conditions, as they have a low Carbon content.

Steel flanges provide an easy access for cleaning, inspection or modification. They usually come in round shapes but they can also come in square and rectangular forms. The flanges are joined to each other by bolting and joined to the piping system by welding or threading and are designed to the specific pressure ratings; 150lb, 300lb, 400lb, 600lb, 900lb, 1500lb and 2500lb.

A flange can be a plate for covering or closing the end of a pipe. This is called a blind flange. Thus, flanges are considered to be internal components which are used to support mechanical parts.

Steel flanges provide an easy access for cleaning, inspection or modification. They usually come in round shapes but they can also come in square and rectangular forms. The flanges are joined to each other by bolting and joined to the piping system by welding or threading and are designed to the specific pressure ratings; 150lb, 300lb, 400lb, 600lb, 900lb, 1500lb and 2500lb.

A flange can be a plate for covering or closing the end of a pipe. This is called a blind flange. Thus, flanges are considered to be internal components which are used to support mechanical parts.

Tee is also known as pipe fitting tee or tee pipe fitting, tee joint, etc. Used mainly to change the direction of the fluid, used in the main pipe to branch pipe.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

The flange connection type usually comes with double units, with a gasket and some bolts & nuts to connect each other. (Firstly pipes are welded on the flanges, then valves and other equipment could be installed on flanges.)

When connecting these parts, put gasket in the middle of two flanges, then tightening the flange screws, so the two will be connected together tightly.

ASTM A694 is a standard specification covering carbon and alloy steel forgings for pipe flanges, fittings, valves, and other parts for high pressure transmission services. The steel meets chemically analyzed standard chemical composition requirements and meets full casting and tensile strength performance requirements.

In most instances, these fitting have been shaped to fit a profile in order to perform that particular function.We manufacture wide range of ASTM A234 Seamless Fittings such as ASTM/ ASME SA 234 Reducer, Elbow etc. AS per Universal standard like ASME/ASTM, we are supplying A234 WPB Carbon Steel Fittings globally.

These fittings material consist of killed steel, forgings, bars, plates, seamless or HFW (fusion welded) pipe products, with filler metal added.

Carbon Steel ASTM A105 Flanges Made of carbon or mild steel material. Carbon, manganese, phosphorus, sulfur and iron may be included in the material composition.

A106 steel pipes can be disintegrated on the basis of its application. Typical applications of steel pipes are in the area of water pipelines, industrial water lines, oil pipe lines, cross country pipe line, agriculture and irrigation pipes, tube lines for natural gas, chemical industries, automobile industry, construction industries and other purposes.

With the specification acting as a guide, it is required that the material follow some requirements. Along with the tensile and yield strength, the ASTM A105 Elbow must adhere to the requirements of the specification for details such as reduction of area, elongation, and hardness requirements.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Carbon steel gr A105 is the result of a dual phase microstructure, which is alloyed with nitrogen.

ASTM A350 LF2 CS round bars are often forged and extruded, but are not easily welded due to their tendency to crack.

Carbon steel material is used for forging. This material can be in shape of a bar or in shape of the ingot to meet various forging requirement. They offer maximum machinability and weldability.

The A420 Grade WPL6 fitting is used in pipelines in the paper and pulp industries, condensers, sea water, marine engineering, waste water management and pollution control systems.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Welding Neck Flanges are easy to recognize at the long tapered hub, that goes gradually over to the wall thickness from a pipe or fitting.

The long tapered hub provides an important reinforcement for use in several applications involving high pressure, sub-zero and / or elevated temperatures.