A182 F5 F11 F12 F51 Alloy WN Flange connecting pipes in pipeline systems

Common Trade Names: Nickel Alloy 36, Invar 36®, Nilo 6®, Pernifer 6®
Invar 36® is a nickel-iron, low expansion alloy that contains 36% nickel, Invar 36 has a low coefficient of expansion from cryogenic temperatures to about +500°F (260°C).
Invar 36 Tube OD:0.2-6mm, WT: 0.02-2mm

Nilo Alloy 36, W.Nr 1.3912, Invar 36® is a nickel-iron, low controlled expansion alloy that contains 36% nickel and possesses a rate of thermal expansion approximately one-tenth that of carbon steel.
Invar 36 Specifications: UNS K93600, W.Nr 1.3912

Nilo / Alloy K W.Nr.: 1.3981
UNS: K94610 ASTM F15
Fixed-expansion glass-encapsulated iron-nickel-cobalt alloys, Kovar alloys, have a linear thermal expansion coefficient similar to that of hard glass within a certain temperature range
For mating sealing with hard glass

The weld neck flange comprises of a round fitting that extends beyond the rim of the circumference. These flanges, typically manufactured from forging, are actually welded to pipes.

These Alloy Steel F12 Lap Joint Flanges are made up of in dissimilar grades of standard ranges and meet its terms through national and international standards. Alloy Steel ASTM A182 F12 flanges are exceptionally resistant to corrosion in nature. In the interim, fabricators can cut pipe to length without inconvenience for these ASTM A182 F12 Alloy Steel flanges.

Alloy steel seamless pipes are widely used in medium and low pressure fluid pipelines, casings, boiler tubes, oil and gas industry, chemical industry, power generation industry, transformers, agriculture, bearings, general engineering, automobiles, hydraulics, railways, mining, construction, aviation Aerospace, medical, defense and electric motors. P91 alloy steel is mainly used in the power industry. For welded structures, the ASME Boiler and Pressure Vessel Code limits the carbon content to less than 0.35%. Alloy steels are ideal for applications that require higher strength, tougher or better wear resistance than standard carbon steel grades.

Each tube of the A335 shall be hydrostatically tested. In addition, each tube shall be inspected using non-destructive testing methods in accordance with prescribed practices.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.21

ASTM A182 F12 round bar is commonly used in different industries, such as air-conditioning industry, aluminum industry, boiler industry, steel industry, cement industry, construction industry, etc. ASME SA 182 F12 bar stock is available in a variety of sizes to meet different customer requirements.

ASTM A182 Alloy Steel Pipe Fittings are very easy to install and have a low hub due to the pipe going into the fitting before welding.

This is used in fabrication of tubes, boilers and super heaters. On many other applications, this is used and is available in various other sizes and shapes.

ASTM A335 Pipe (ASME S/A335, Chorme-Moly) is a seamless ferritic alloy steel pipe for high temperature service. Pipe ordered in accordance with this specification shall be suitable for bending, vanstoning and similar forming operations, and fusion welding. Sometimes referred to as “P grade”, lilac molybdenum tubing is popular in P grades P5, P9, P11, P22 and P91. The P11, P22 and P91 grades are most commonly used in the power industry and petrochemical plants, while the P5 and P9 grades are often used in oil refineries.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P98

A193 Grado B7 es el tama?o de empernado mas utilizado, ademas de las tuercas A194 Grado 2H se utilizan para empernar tuberias de acero al carbono. Los pernos A193 B7 estan disponibles en tama?os metricos de M6 a M180 y tama?os imperiales de 1/4 a 7 pulgadas de diametro.

ASTM A182 is commonly used in petrochemical, plumbing, public service, and water works.

They are ideal for applications carrying corrosive or high-temperature fluids or gases. Industries that could benefit from chrome moly flanges include: Oil and Gas, Refinery, Power Generation, and Chemical Processing.

N04400 is a ductile nickel-copper-based alloy consisting primarily of two-thirds nickel and one-third copper. Alloy N04400 is known for its resistance to a variety of corrosive conditions, including alkalis (or acid-like substances), brine, hydrofluoric acid, and sulfuric acid. Other advantages of using this alloy are toughness and high strength over a wide temperature range; it can also be manipulated to be magnetic if desired.

A wide range of industries, shops and systems rely on high-performance flanges, and custom pipe flanges are often critical to getting the job done right.

F5 A182 Pipe Flanges tends to have a fairly high electrical conductivity amongst other wrought alloy steels in the same category. It has a comparatively high base cost and high embodied energy. ASTM A182 is the Standard Specification for Forged Stainless Steel Pipe Flanges and Stainless Steel Forged Fittings.

The flanges can be threaded, ring type joint, lap joint, weld neck or socket welded.

Despite adding these elements, low alloy steel flanges aren’t necessarily difficult to weld. The key to achieve a successful performance of the welding operation is by knowing exactly what type of low-alloy steel you have.

ASTM A182 F5 Lap Joint Flanges go by a range of names, including back up flange, loose hubbed flange, loose ring flange and van stone flange. ASTM A182 F5 Flanges is a method of connecting pipes, valves, pumps and other equipment to form a piping system. It also provides easy access for cleaning, inspection or modification. Flanges are usually welded or screwed. Flanged joints are made by bolting together two flanges with a gasket between them to provide a seal.

P11 Pipe is a chromium molybdenum alloy made pipe. It is used in the high temperature services. It is corrosion resistant, strong and ductile. Steel India Company is a manufacturer of different grades of the chromium molybdenum alloy made pipes.

Alloy steel is steel that is alloyed with a variety of elements in total amounts between 1.0% and 50% by weight to improve its mechanical properties. Alloy steels are broken down into two groups: low alloy steels and high alloy steels. The difference between the two is disputed. Smith and Hashemi define the difference at 4.0%, while Degarmo, et al., define it at 8.0%.[1][2] Most commonly, the phrase “alloy steel” refers to low-alloy steels.

Chromium-Molybdenum alloy steel flanges dimensions has been widely used in the many areas. Their utilization can be seen in areas such as steam power equipment, petrol chemical industry, and high temperature services.

ASTM A335 P22 pipe specifications include seamless “chrome molybdenum” alloy steel pipe and alloy steel pipe. Chromium is an important compound in stainless steel. Any steel with 12% or more chromium is considered stainless steel. Unrivaled chromium resists oxidation at high temperatures.

Flanges that can withstand harsh environments are critical when transferring high temperature or corrosive media from one process to the next through chrome alloy tubing.

ASTM A182 lap flanges are known by a variety of names, including support flanges, loose flanges, loose ring flanges, and van stone flanges.

Alloying steels have added alloying elements such as manganese and nickel. These elements increase the strength, hardness and toughness of metals. Added elements make alloy steels ideal for demanding industrial applications.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.24

Alloy Steel F12 slip on Flanges are made up of chromium molybdenum steel alloy and therefore have a high rupture resistance. They are also preferred due to their light weight because of the low carbon and high alloy nature.Alloy Steel ASTM A182 flanges are very simple to install and have a low center because the pipe occasionally trips into the flanges after welding.

ASTM A182 Gr F11 class 2 pipe flange has low thermal conductivity and moderately low tensile strength and also has many other properties like great quality, toughness and many other points.

ASTM A194 Grade 2H bolts are high strength bolts made from carbon steel.

Its versatility is the main reason it can be used in various industries, as well as its excellent strength and formability.

Alloy steel is steel that is alloyed with a variety of elements in total amounts between 1.0% and 50% by weight to improve its mechanical properties. Alloy steels are broken down into two groups: low alloy steels and high alloy steels. The difference between the two is disputed. Smith and Hashemi define the difference at 4.0%, while Degarmo, et al., define it at 8.0%.[1][2] Most commonly, the phrase “alloy steel” refers to low-alloy steels.

The creep strength (for 1% elongation at 105 hours) of A182 Grade F5 may reach 170 MPa at about 450 ¡ãC.