A182 F5 F9 F11 forged fitting 3000psi NPT thread elbows

Common Trade Names: Nickel Alloy 36, Invar 36®, Nilo 6®, Pernifer 6®
Invar 36® is a nickel-iron, low expansion alloy that contains 36% nickel, Invar 36 has a low coefficient of expansion from cryogenic temperatures to about +500°F (260°C).
Invar 36 Tube OD:0.2-6mm, WT: 0.02-2mm

Nilo Alloy 36, W.Nr 1.3912, Invar 36® is a nickel-iron, low controlled expansion alloy that contains 36% nickel and possesses a rate of thermal expansion approximately one-tenth that of carbon steel.
Invar 36 Specifications: UNS K93600, W.Nr 1.3912

Nilo / Alloy K W.Nr.: 1.3981
UNS: K94610 ASTM F15
Fixed-expansion glass-encapsulated iron-nickel-cobalt alloys, Kovar alloys, have a linear thermal expansion coefficient similar to that of hard glass within a certain temperature range
For mating sealing with hard glass

WPHY 52 chemical composition are known for accurate dimension, corrosion resistance and their durability.

Alloy Steel F9 Threaded Flanges is 100% recyclable, where 50% of new steel is produced using re-softened scrap metal rendering it an Eco-friendly material. There are different classes to indicate the pressure capacities of the flanges. The AS A182 F9 RTJ Flanges are a special type of flanges because they come in two parts that have two rings that are welded to the pipe ends first and then the pipes are brought together by welding.

Due to the chemical composition of Molybdenum (Mo) and Chromium (Cr), A335 is often referred to as Chromium Molybdenum Tube. Molybdenum increases the strength of the steel as well as the elastic limit, wear resistance, impact quality and hardenability. Molybdenum increases resistance to softening, inhibits grain growth, and makes chromium steel less susceptible to embrittlement. Molybdenum is the most effective single additive for improving high temperature creep strength. It also enhances the corrosion resistance of the steel and inhibits pitting corrosion. Chromium (or chrome) is the basic component of stainless steel. Any steel with 12% or more chromium is considered stainless steel. Chromium is almost irreplaceable in terms of resistance to oxidation at high temperatures. Chromium increases tensile, yield and hardness at room temperature.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P99

These ASTM A182 alloy steel F12 flanges are corrosion resistant. ASTM A182 alloy steel F12 flanges also have high dimensional accuracy.

Alloy 20 (Alloy 20) is an iron-based austenitic alloy developed to resist sulfuric acid corrosion. It has excellent resistance to sulfuric acid corrosion; it has strong resistance to phosphoric acid, nitric acid and chloride environments, chloride stress corrosion, pitting corrosion and crack corrosion. Therefore, alloy 20 has the name of anti-corrosion alloy; it has a wide range of applications: such as: chemical, food, medicine, power production and plastics industries will use it. For resistance to pitting corrosion and chloride corrosion, stress corrosion cracking problems, etc., alloy 20 is often used.

The alloy steel slides on these flanges can be machined and polished in a stress-relieved condition.

Alloy Steel A182 F12 Flanges has excellent resistance to general corrosion, pitting, and crevice corrosion in chemicals containing chlorides and sulfuric, phosphoric, and nitric acids. Alloy Steel F12 Blind Flanges also possesses a great resistance to pitting in chloride solutions, a great resistance to crevice and stress corrosion cracking.

There are different types of fittings such as bends, tees, crosses, reducers, caps and the WPHY 52 Elbow.In sour service wells, when hydrogen sulphide gas reacts with water, the hydrogen molecule gets deposited either on the pipes or fittings.

A182-F11 is an American standard pearlitic structure heat-resistant steel forgings, the execution standard: ASTM-A182/A182M-2017.

Alloy steel is steel that is alloyed with a variety of elements in total amounts between 1.0% and 50% by weight to improve its mechanical properties. Alloy steels are broken down into two groups: low alloy steels and high alloy steels. The difference between the two is disputed. Smith and Hashemi define the difference at 4.0%, while Degarmo, et al., define it at 8.0%.[1][2] Most commonly, the phrase “alloy steel” refers to low-alloy steels.

Alloy steel F12 square bars can withstand very high temperatures with minimal product aging even after thousands of operating hours,

ASTM A182 Stainless Steel Flanges are manufactured per ASME B16.5 150#, 300#, 600#, 900#, 1500#, 2500#.

The ANSI B16.5 Alloy Steel Slip On Flange is a flange type that allows the pipes to slip onto the flange and makes the connection in a precise locations.

ASTM A194 Class 2h bolts are carbon base steel heavy duty hex nuts. Sa194-2h material is a common high strength nut. This specification ASTM A194 Class 2h washers are typically used in conjunction with the following fastener standards – A193 Class B7, A325, A490.

Chromium Molybdenum Alloy Steel or Chromium Molybdenum, CrMo is an alloy steel used for high temperature and high pressure service. Chromium molybdenum is used in power generation and petrochemical industries for its tensile strength, corrosion resistance and high temperature strength. Chromium molybdenum has a better strength-to-weight ratio than steel, which enables designers to use thinner walled tubing or smaller diameter tubing to reduce overall weight.

In applications where higher working pressures are a prerequisite, the use of seamless pipes is justified. Although stronger than welded pipe, the cost is much higher. In addition, in welded products, there is a greater risk of intergranular corrosion in the heat-affected weld zone. The obvious difference between alloy steel welded pipe and seamless product is the transverse seam along the length of the pipe
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P128

The flanges can be threaded, ring type joint, lap joint, weld neck or socket welded.

Our Alloy Steel Seamless Pipes (IBR) are made of alloy steel with excellent properties. These were developed for energy-related applications involving oil and gas drilling and are therefore subject to the stress of machine parts. In addition, alloy steel pipes are used in domestic, professional or industrial fields.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P118

Steel flanges provide an easy access for cleaning, inspection or modification. They usually come in round shapes but they can also come in square and rectangular forms. The flanges are joined to each other by bolting and joined to the piping system by welding or threading and are designed to the specific pressure ratings; 150lb, 300lb, 400lb, 600lb, 900lb, 1500lb and 2500lb.

A flange can be a plate for covering or closing the end of a pipe. This is called a blind flange. Thus, flanges are considered to be internal components which are used to support mechanical parts.

ASTM A182 GR F5 flanges fall under the ASTM A182 specification.

ASTM A193 Grade B7 bolts and studs are made from chrome molybdenum steel and are quenched and tempered (heat treated) to achieve the desired mechanical properties (strength). Grade B7 is the most commonly used A193 bolt grade in construction.

Alloy steel pipe is an economical section steel. Widely used in the manufacture of structural and mechanical parts, such as oil drill pipes, automobile drive shafts, bicycle frames and steel scaffolding for construction. Making ring parts with alloy steel pipes can improve material utilization, simplify the manufacturing process, save materials and processing time, such as: filling bearing rings, jack sleeves, etc. At present, steel pipes have been widely used in manufacturing.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.25

C276 has good fabricability and impressive corrosion resistance in some of the most severe environments.

While the term alloy steel could even apply to stainless steel grades, the ASTM specification or ANSI standard used to produce the Alloy Steel Flanges would give the buyer details regarding the chemistry details of these products.

Flanges are usually welded or threaded. Flange joints are made by bolting two flanges together with a gasket between them to provide a seal.

ASTM 182 is used for pressure systems, including flanges, fittings, and similar parts that conform to specified dimensions or dimensional standards such as ASME codes.

Production of low alloy steel materials of different specifications. A335 is a specification for seamless ferritic alloy steel pipes. These alloy steel seamless pipes are used for high temperature service. There are also high alloy steel materials. There are different grades in this material specification. There are grades P1, P2 to P91 and P92. The most commonly used grades are p5, p9, p11, p22, p91 and p91.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P136

High alloy steel is defined by a high percentage of alloying elements.

The thickness and the inner diameter of the flange will be as per the size of the pipe for which this welding neck flange is being made.

We have a complete inventory of ASME SA335 P9 pipe and supply ASME SA335 P9 alloy steel seamless pipe products in various sizes to meet the high temperature service requirements of power plant, petrochemical plant and oil refining industry applications. ASME SA335 P11 Alloy Steel Seamless Pipe Pipes can be structural in nature and can also be used for fluid and oil transfer.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.26