A182 F51 2205 S31803 flange ring highly suitable material

ASTM A240 Type 2205 Plate is a duplex stainless steel plate that is used extensively in various industries such as chemical processing, oil and gas exploration, and marine engineering. SA 240 GR 2205 Sheet is made from grade 2205 stainless steel, which is a combination of ferritic and austenitic steel.

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

A789 UNS S31803 and UNS S32205 are two grades of duplex stainless steel that are widely used in various industrial applications. These Duplex S31803 Seamless Pipes are known for their excellent corrosion resistance, high strength, and good weldability. A789 is a specification that covers seamless and welded tubes made from duplex stainless steel.

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

2205 is the most widely used duplex (ferritic/austenitic) stainless steel grade. It finds applications due to both excellent corrosion resistance and high strength.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

The fatigue strength of S31803 nuts is also very good under all extreme conditions. Duplex stainless steel UNS S31803 nuts also have good fatigue strength and excellent resistance to stress corrosion cracking, cracking, pitting, erosion, etc.

It is a super duplex alloy, so heat resistance is also what Super Duplex 2507 rods are capable of. River or sea water often contains highly corrosive chemicals containing sulfur or chloride ions, and materials such as the 2507 Super Duplex Round Bar can withstand these chemicals.

The standard austenitic steels like 304 (1.4301) and ferritic steels like 430 are relatively easy to make and to fabricate. As their names imply, they consist mainly of one phase, austenite or ferrite. Although these types are fine for a wide range of applications, there are some important technical weaknesses in both types.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Duplex variety stainless steels work well in those applications which contain a high concentration of chlorine. Chloride ions, which are normally detrimental to conventional stainless steels, do not cause any damage to the much stronger Duplex Stainless Steel Pipe. The chemistry of this steel ensures better performance with higher mechanical properties in comparison to austenitic stainless steel pipes.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Super duplex steel fasteners have a metallurgical microstructure consisting of a mixture of ferritic and austenitic steels in equal proportions of 50-50.

Super Duplex stainless for e.g. alloy UNS S32750, has a mixed microstructure of both austenite as well as ferrite in an equal or 50/50 ratio.

S32760 also has high strength and extended service life. It is 10% lighter than grade 316 steel, ideal for sub-zero use, and more cost-effective than nickel alloys. Stainless steel grade F55 can be easily machined and welded.

Stainless steel grade UNS S31803 is highly resistant to intergranular corrosion due to its low carbon content, which prevents carbide precipitation at grain boundaries.

Stainless steel round bar is a cylindrical stainless steel product, which is widely used in auto parts, aviation, aerospace hardware tools, chemical industry and other industries. Stainless steel WNR 1.4301 wire is known for its amazing tensile strength and fabric power and is available in a variety of sizes according to customer requirements. They are the product of the best materials and primary strategies that conform to the established norms of the industry. In our assortment we have round rods with special type of ends to ensure short and tight fittings in pipes.

ASTM A789 / ASME SA789 covers grades of average wall thickness, or, if specified on the order, minimum wall thickness, of stainless steel tubing for services requiring general corrosion resistance, with particular emphasis on resistance to stress corrosion cracking. These steels are suscep- tible to embrittlement if used for prolonged periods at elevated temperatures.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Duplex 2205 pipe is stainless steel. It belongs to a family of stainless steels called duplex steels. There are different groups of this material. This series of pipes can be cold drawn, hot rolled and welded. Alloy 2205 seamless tube is cold drawn, it has less absolute roughness.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.39

UNS S32750 ( F53 / 1.4410 / Alloy 2507) has a lower coefficient of thermal expansion and higher thermal conductivity than austenitic steel, and is suitable for operating temperatures up to 300 ℃.

2507 Super Duplex Stainless Steel was designed for demanding applications which require exceptional strength and corrosion resistance, such as chemical process, petrochemical, and seawater equipment.

S32760 is a super duplex stainless steel with a ferritic-austenitic microstructure.

Duplex stainless steel fasteners are made from alloys with high chromium content and low to moderate nickel content.

The combination of chromium, molybdenum and nitrogen convey the good resistance of 2205 to chloride pitting and crevice corrosion. This resistance is extremely important for services such as marine environments, brackish water, bleaching operations, closed loop water systems and some food processing applications. The high chromium, molybdenum and nitrogen contents of 2205 provide corrosion resistance superior to common stainless steels, such as, 316L and 317L in most environments.

Duplex2507 thread rod are dual phase austentic-ferritic duplex fasteners manufactured from alloy containing chromium, nickel and molybdenum with restricted carbon content and minimum PREN42. SAF2507 thread rod have high strength, resistance to pitting, stress corrosioni cracking, erosion and corrosion fatigue, crevice corrosion resistance.

In duplex steels, the duplex microstructure has the high strength of ferritic grades while retaining the corrosion resistance of austenitic grades. It is not uncommon to use this metal as a practical solution to chloride-induced stress cracking, the Achilles heel of stainless steel.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.46

Both ASME B16.5 and ASME B16.47 have endorsed pipe flanges made from a series of duplex stainless steel grades.

ASTM A182 F51 equates to UNS S31803. This was the original caption for a 22% Cr duplex stainless steel.

Duplex plates have a two-phase or two-phase microstructure. The microstructure of the duplex steel S32205 foil consists of equal proportions of ferrite and austenite.

It accounts for around 80% of overall duplex stainless steel production.

Duplex 2205 stainless steel is resistant to chlorides and H2S. Is a problem solver in most industry segments. Duplex 2205 is utilized in heat exchangers and piping in oil and gas, oil refinery, chemical, and petrochemical industry.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

ASTM A182 UNS S32750 Flanges is the most common super duplex grade that has an enhanced pitting and crevice corrosion resistance compared with the ordinary austenitic or duplex types.

Duplex 2205 is a nitrogen-enhanced duplex stainless steel designed to solve common corrosion problems encountered with 300 series stainless steels. “Duplex” describes a family of stainless steels that are neither fully austenitic (such as 304 stainless steel) nor purely ferritic (such as 430 stainless steel).
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.65

Grade 904L is less resistant to nitric acid than grades 304L and 310L, which are free of molybdenum. This steel grade needs to be solution treated following cold working, to achieve maximum stress corrosion cracking resistance under critical environments

The flange a182 f53 can also differ in the face type as flat face, raised face and ring type joint flanges.

The ASTM A182 F51 flanges refer to standard or non-standard flanges manufactured in accordance with ASTM A182 Grade F51, which is designated with UNS number S31803.

Zeron 100 is highly resistant to corrosion in a wide range of organic and inorganic acids. The copper content gives excellent resistance to corrosion in many oxidising acids. This alloy is also highly resistant to strong alkalis.