A182 F51 2205 S31803 flange ring offers a pitting stress and crevice corrosion

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

A789 UNS S31803 and UNS S32205 are two grades of duplex stainless steel that are widely used in various industrial applications. These Duplex S31803 Seamless Pipes are known for their excellent corrosion resistance, high strength, and good weldability. A789 is a specification that covers seamless and welded tubes made from duplex stainless steel.

ASTM A240 Type 2205 Plate is a duplex stainless steel plate that is used extensively in various industries such as chemical processing, oil and gas exploration, and marine engineering. SA 240 GR 2205 Sheet is made from grade 2205 stainless steel, which is a combination of ferritic and austenitic steel.

ASTM A1082 specification alloy S31803 fasteners have higher pitting and crevice corrosion than stainless steel alloy 316. Due to its higher corrosion resistance, alloy grade UNS S31803 is able to exhibit better fatigue strength than other commonly used austenitic stainless steel grades in environments containing corrosive media.

S32760 Heavy hex nuts are slightly larger and thicker than standard (finished) hex nuts. There are numerous grades and the heavy pattern is typically used for large diameter and high strength bolts.

The high chromium, molybdenum and nitrogen content of 2205 provides better corrosion resistance than common stainless steels such as 316L and 317L in most environments.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.54

Its impact strength or hardness properties inherited from the ferritic side make 2507 stainless steel round bar suitable for structural applications including bridge construction and more.

Duplex 2205 was tested under reverse bending stress at room temperature compared to SS316. The results show that Duplex 2205 has approximately twice the fatigue limit/yield strength.

We offer a complete range of 2205 Duplex Steel Fasteners such as Bolts, Nuts, Washers, Screws, Connecting Rods and Duplex Steel Screws. We also offer super duplex fasteners in different sizes, shapes, features and thicknesses according to customer requirements.

The mechanical strength, corrosion resistance and low temperature toughness of the ASTM A182 F53 Flanges is higher than that of ordinary duplex stainless steels.

Grade UNS S31803 is termed as a duplex class due to its mixed Austenitic-ferritic microstructure. Duplex stainless steel alloys have an equal proportion of both austenite and ferrite, which is why Duplex Steel Fittings exhibit properties prominent to both classes.

The ASTM A182 UNS S32750 Slip On Flanges are good to use with seamless pipes.

Duplex steel UNS S32205 fasteners are used in the pulp and paper industry such as digesters, bleach plants and stock handling systems. Also known as WNR 1.4462 fasteners, they are developed and designed in our infrastructure to international quality standards to the highest quality standards.

Duplex 2205 bolts (EN 1.4462) are made from an austenitic-ferritic stainless steel, which was designed to deliver higher strength and corrosion resistance than 300 series stainless steels. It helps users to avoid stress corrosion cracking that is typically seen with 316 and 317. Duplex 2205 bolts combine the qualities of stress corrosion cracking resistance and high strength derived from being a ferritic alloy along with its austenitic fabrication capabilities.

The materials used to manufacture the fasteners are of top quality and standard, thus increasing the compatibility of the final product for adverse applications.

Compared with austenitic stainless steel, F51 duplex stainless steel has twice the compressive strength, and compared with 316L and 317L, the designer can reduce its weight.

These super duplex UNS S32760 round bars are available in a variety of shapes, sizes and diameters depending on the needs and requirements of the application and customer supplied specifications. These super duplex UNS S32760 round bars are resistant to localized corrosion.

The combination of the ferritic phase and austenitic phase provides both high strength and excellent corrosion resistance.

The different face types have their own advantages in piping applications.

This category of material includes grades 2205, F51, F53, and F60. Duplex stainless has increased in popularity over the years due to its excellent chemical and mechanical properties versus their basic stainless counterparts, given especially that the cost differences are minimal now as the availability has increased.

The pressure ratings of the material are designated by classes 150Lbs through 2500LBs. There are different types of the duplex f51 flanges such as the raised face, ring type joint and flat face flanges.

2205 Duplex nuts are the most widely used duplex stainless steel 2205 fasteners and feature a high yield strength that is twice that of standard austenitic stainless grades.

Duplex stainless steel, alloy 2205 was designed as comprising 22% chromium, 3% molybdenum, and 5-6% nickel nitrogen. Alloy 2205 combines the desirable aspect of properties of both austenitic and ferritic grades.

Super Duplex Steel Pipes and Tubes are available in various dimensions, shapes like square, rectangle, and so on and enormous sizes. We are offering the standard quality of products of our customers. Our Product is offering excellent corrosion resistance and remarkable dimensional accuracy.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

2205 has excellent corrosion properties, and it is well-suited to environments containing chlorides and hydrogen sulphide, for use in oil and gas extraction from sour wells, in refineries and in process solutions contaminated with chlorides.

Duplex 2205 bolts have a ductile to brittle transition at -50¡ãC and also become brittle at 300-1000¡ãC, so a temperature of -50¡ãC to 300¡ãC is recommended. Exposure to above 300¡ãC will not only cause embrittlement of 2205 bolts, but will also reduce corrosion resistance.

2205 is the standard duplex grade and is more economical than most other duplex grades.

2507 nuts are highly resistant to carbide-related intergranular corrosion due to their low carbon content (0.020% in weight).

Zeron 100 Threaded Rod are available in hot forged,cold forged and bar stock machined conditions depending upon the order quantity.SA 182 F55 is a forging grade of Alloy 32760 or UNS 32760 which is highly resistant to crevice corrosion and pitting alloy for variety of corrsives. It is 22% chromium duplex stainless steel.

Stub ends are used with lap flanges. Metline is an ISO certified, PED approved duplex 2205 stub end manufacturer and supplier with a manufacturing base in India. We can supply both long and short ends (collars) with test certificate according to EN10204 3.1.

Super Duplex 2507 Equal tees are the most common fittings.

ASTM A240 Duplex 2205 Sheets contains approximately 40-50% ferrite. Often referred to as the work horse grade 2205 is the most widely used grade in the duplex family of stainless steels.

Super duplex steel fasteners have a metallurgical microstructure consisting of a mixture of ferritic and austenitic steels in equal proportions of 50-50.