A182 F51 2205 S31803 flange ring with extreme corrosion resistance and strength

ASTM A240 Type 2205 Plate is a duplex stainless steel plate that is used extensively in various industries such as chemical processing, oil and gas exploration, and marine engineering. SA 240 GR 2205 Sheet is made from grade 2205 stainless steel, which is a combination of ferritic and austenitic steel.

A789 UNS S31803 and UNS S32205 are two grades of duplex stainless steel that are widely used in various industrial applications. These Duplex S31803 Seamless Pipes are known for their excellent corrosion resistance, high strength, and good weldability. A789 is a specification that covers seamless and welded tubes made from duplex stainless steel.

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

Astm A479 Super Duplex Steel UNS S32760 Hex Bolts have a high PREN value, the rate of pitting is lower, despite the use of these fasteners in highly corrosive environments such as oil wells and pipelines transporting soured oils, sulfide ores processing, kraft paper production plants, methionine and lysine factories, as well as the photographic industry.

Super Duplex Steel 1.4410 Flanges are having low alloying costs as compared to the similar ferritic and austenitic grade along with resistant to corrosion in the chloride-containing atmosphere because of well-enhanced yielding and tensile strength.

ASTM A479 Duplex Stainless Steel 1.4462 Punched Washers has resistance to SCC that is of prominence in a lot of applications counting hot water tanks, brewing tanks, desalination plant and process plant. Accordingly, ASTM A479 Duplex Stainless Steel UNS S31803 Lock Washers shows properties of both ferritic and austenitic alloys. Microstructures of ASME SA 479 Duplex Steel UNS S32205 Flat Washers include a combination of ferrite and austenite stages. ASTM A479 Duplex Steel UNS S31803 Washershas outstanding general corrosion resistance in a widespread range of corrosive chemicals containing industrial and seawater acids.

ASTM A240 Type 2507 Duplex Sheet is an alloy used in applications with high strength and corrosion resistance. The composition of the duplex 2507 sheet is approximately 25% chromium, 7% nickel and 4% molybdenum. This composition makes it resistant to crevice corrosion and chloride pitting.

2205 has excellent corrosion properties, and it is well-suited to environments containing chlorides and hydrogen sulphide, for use in oil and gas extraction from sour wells, in refineries and in process solutions contaminated with chlorides.

Due to the alloy’s very high mechanical strength, dual-phase fastener manufacturers can reduce the weight of their designs by thinning the cross-section of the final product, proving a cost-saving alternative to other grades of stainless steel.

The UNS S32750 standard of Pipe Fittings consists of 25% chromium, 4% molybdenum, and 7% nickel. The UNS S32750 Pipe Fittings have a 50-50 microstructure of ferritic and austenitic steel grades with improved strength.

2507 has Combination of properties given by austenitic and ferritic structure, and Good weldability and workability.

It is a tee fitting with two outlets at a 90¡ã junction to the main line.

Duplex stainless steels have a mixed microstructure of austenite and ferrite, the aim being to produce a 50/50 mix, although, in commercial alloys, the mix may be 40/60 respectively.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Duplex variety stainless steels work well in those applications which contain a high concentration of chlorine. Chloride ions, which are normally detrimental to conventional stainless steels, do not cause any damage to the much stronger Duplex Stainless Steel Pipe. The chemistry of this steel ensures better performance with higher mechanical properties in comparison to austenitic stainless steel pipes.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Alloy 2507 is highly resistant to carbide-related intergranular corrosion.

Duplex steel alloys have the properties of austenitic and ferritic stainless steels. This is because they have nearly equal proportions of dual microstructural phases (austenite and ferrite) in the annealed condition.

Duplex stainless is a mixed microstructure of austenitic and ferrite (50/50) which has improved strength over ferritic and austenitic steel grades with similar corrosion resistance qualities.

UNS S32750 ( F53 / 1.4410 / Alloy 2507) has a lower coefficient of thermal expansion and higher thermal conductivity than austenitic steel, and is suitable for operating temperatures up to 300 ℃.

ASTM A182 F53 Flange is a high strength flange that has 550MPa minimum yield strength and 800MPa minimum tensile strength.

From corrosion resistance to strength, businesses around the world appreciate these properties of 2507 Super Duplex Seamless. Due to the dual microstructure phase, the weldability of this alloy is classified as good, which is why a relatively robust and durable super duplex welded pipe can be achieved.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.41

ASTM A240 UNS S32760 Plate is a super duplex stainless steel alloy for specific applications.

All Duplex 2205 Seamless Pipe produced according to the ASTM A789 must be furnished in a heat treated condition.

Stub ends are used with lap flanges. Metline is an ISO certified, PED approved duplex 2205 stub end manufacturer and supplier with a manufacturing base in India. We can supply both long and short ends (collars) with test certificate according to EN10204 3.1.

Our duplex steel UNS S31803 fasteners are available in different grades such as industrial washers, industrial screws, stainless steel washers, stainless steel screws and more.

The yield strength is also higher, allowing component designers to reduce section size for load-bearing applications.

The pressure-temperature ratings for ASTM A182 F53 flanges are the same as that for other duplex stainless steels.

These grades are excellent for fixed service simple flange connections, but slightly less so when forming a complex metallic shape. Fortunately, the workability of duplex into complex and rounded structures is less of an issue in structural steel given the wide preference for simple mild steel in non corrosive applications.

2205 duplex grade without requiring higher levels of nickel or molybdenum. This means that it is a low-cost option than most austenitic stainless steel having the same requirements.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

ASTM A182 UNS S32750 Flanges is the most common super duplex grade that has an enhanced pitting and crevice corrosion resistance compared with the ordinary austenitic or duplex types.

Duplex stainless steels are approximately 50% ferrite and 50% austenite for optimum strength and corrosion resistance.

The chemical composition specifications stated in the norm must be met by the steel Super Duplex Plate. The content, in this case Thick Duplex Alloy 2507 Cold Rolled Sheet, must also meet the required mechanical properties.

The duplex material contains bot the austenitic and ferrite structures in the metallurgy of the material. These properties bring the material the best of both ferritic and austenitic steel types. The pipes could be hot rolled or cold drawn. The hot rolled ones are stronger and the cold drawn ones are seamless and accurate in dimensions. The Duplex Seamless Pipe is used in applications with high precision requirements.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”