A182 F53 2507 special flange provides excellent resistance to pitting and crevice corrosion resistance

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

A789 UNS S31803 and UNS S32205 are two grades of duplex stainless steel that are widely used in various industrial applications. These Duplex S31803 Seamless Pipes are known for their excellent corrosion resistance, high strength, and good weldability. A789 is a specification that covers seamless and welded tubes made from duplex stainless steel.

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

ASTM A240 Type 2205 Plate is a duplex stainless steel plate that is used extensively in various industries such as chemical processing, oil and gas exploration, and marine engineering. SA 240 GR 2205 Sheet is made from grade 2205 stainless steel, which is a combination of ferritic and austenitic steel.

ASTM A240 UNS S32750 plate is suitable for high tension and high corrosion environments.

In duplex steels, the duplex microstructure has the high strength of ferritic grades while retaining the corrosion resistance of austenitic grades. It is not uncommon to use this metal as a practical solution to chloride-induced stress cracking, the Achilles heel of stainless steel.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.46

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

The applications of the flanges include petroleum, petrochemical, oil and gas and other high performing piping systems.

Duplex steel sheets are resistant to chloride stress corrosion cracking at 150¡ãC.

There are different types of flanges such as slip on flanges, socket weld flanges, forged flanges, blind flanges, reducing flanges and many by their functions.

2507 has good weldability and workability, and it’s widely used in desalination equipment, chemical process pressure vessels, piping and heat exchangers.

HT PIPE is the government certified and doing business in steel industry for long years and are manufacturing S32750 Duplex buttweld fittings at affordable rates.

Duplex steel UNS S31803 round bars are known as stainless austenitic-ferritic, with equal amounts of ferrite and austenite.

ASTM A240 Type 2205 Duplex Sheet provides a maximum Brinell hardness value of approximately 290 in the annealed condition.

Supplied in the annealed condition, it has a yield strength of 80ksi (550Mpa), which is higher than most austenitic and duplex grades.

These grades of super duplex stainless steel fasteners are used when applications require excellent corrosion resistance and strength. Composed of nitrogen, molybdenum and chromium, they have excellent resistance to crevice corrosion and chloride pitting.

The pressure-temperature ratings for ASTM A182 F53 flanges are the same as that for other duplex stainless steels.

From corrosion resistance to strength, businesses around the world appreciate these properties of 2507 Super Duplex Seamless. Due to the dual microstructure phase, the weldability of this alloy is classified as good, which is why a relatively robust and durable super duplex welded pipe can be achieved.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.41

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

Duplex 2205 flanges are made from an austenitic-ferritic stainless steel, which was designed to deliver higher strength and corrosion resistance than 300 series stainless steels.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

ASTM A240 UNS S32760 Plate is a super duplex stainless steel alloy for specific applications.

2507 has a higher chromium and molybdenum content which gives the super duplex greater corrosion resistance than other standard duplex grades.

Duplex 2205 is a (two-phase) ferritic-austenitic stainless steel with high strength and excellenut corrosion resistance, with a maximum Brinell hardness of 290 (Rc31) in the annealed condition.

Grade 904L is less resistant to nitric acid than grades 304L and 310L, which are free of molybdenum. This steel grade needs to be solution treated following cold working, to achieve maximum stress corrosion cracking resistance under critical environments

The ASTM A790 Duplex Welded Pipes are an example of welded duplex pipe. There are different grades of duplex pipes with different mechanical properties. There are duplex, super duplex and lean categories in the Duplex Pipes varieties. The Seamless Duplex Pipes are both strong and is highly corrosion resistant.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Duplex steel UNS S31803 hex nuts are widely suitable for the effects of sulphurous gases, especially above 900 degrees Celsius, very low.

The yield strength is also higher, allowing component designers to reduce section size for load-bearing applications.

Duplex 2205 is the most widely used duplex (ferritic/austenitic) grade of stainless steel. It is used due to its excellent corrosion resistance and high strength.

2507 is used for oil and gas industry equipment, offshore platforms, heat exchangers, process and service water systems, fire-fighting systems, and injection and ballast water systems.

This alloy is especially useful in the -50¡ãF/+600¡ãF temperature range. For applications outside this temperature range, this alloy can also be considered, but there are some restrictions, especially when used in welded structures.

The content of chromium, molybdenum, nickel and nitrogen in the 2205 duplex bolt alloy enhances its mechanical properties. E.g. ¨C UNS S31803 Fastener alloys contain trace amounts of carbon.

The Super Duplex 2507 Pipe is made with 25% of chromium, 4% of molybdenum, and 7% of nickel in their composition. As a result, these pipes possess superior corrosion and erosion resistance in various stress-induced environments.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.