A182 F9 F11 F12 F51 Alloy Flange spectacle blind flange for being installed between two pipe flanges

Common Trade Names: Nickel Alloy 36, Invar 36®, Nilo 6®, Pernifer 6®
Invar 36® is a nickel-iron, low expansion alloy that contains 36% nickel, Invar 36 has a low coefficient of expansion from cryogenic temperatures to about +500°F (260°C).
Invar 36 Tube OD:0.2-6mm, WT: 0.02-2mm

Nilo Alloy 36, W.Nr 1.3912, Invar 36® is a nickel-iron, low controlled expansion alloy that contains 36% nickel and possesses a rate of thermal expansion approximately one-tenth that of carbon steel.
Invar 36 Specifications: UNS K93600, W.Nr 1.3912

Nilo / Alloy K W.Nr.: 1.3981
UNS: K94610 ASTM F15
Fixed-expansion glass-encapsulated iron-nickel-cobalt alloys, Kovar alloys, have a linear thermal expansion coefficient similar to that of hard glass within a certain temperature range
For mating sealing with hard glass

Alloy steel is steel that is alloyed with a variety of elements in total amounts between 1.0% and 50% by weight to improve its mechanical properties. Alloy steels are broken down into two groups: low alloy steels and high alloy steels. The difference between the two is disputed. Smith and Hashemi define the difference at 4.0%, while Degarmo, et al., define it at 8.0%.[1][2] Most commonly, the phrase “alloy steel” refers to low-alloy steels.

ASTM A193 Grade B7 specification covers the requirements for high strength alloy steel bolting materials for high temperature or high pressure service and other special purpose applications. It is a standard specification that defines typical chemical composition, mechanical properties, hardness requirements, preferential heat treatment, product marking, certification, and other requirements for bolted connections used in pressure vessel service, valves, flanges, and fittings. ASTM A193 defines SI (metric) and inch-pound units.

Although blind flanges and certain reducing flanges could include plate as a material for construction.

Alloy steel pipes are common in applications involving automobiles, kitchenware, and industrial equipment. Typically, superalloy steel boiler tubes are used in applications with ambient temperatures exceeding 500¡ãC. For example, hollow and thin-walled alloy steel drill pipes must be able to resist pressure differences that manifest between the inside and the outside of these alloy steel seamless pipes.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.45

B7 and B7M shall be heat treated by quenching in a liquid medium and tempering. For B7M fasteners, the final heat treatment, which may be the tempering operation if conducted at 1150 ¡ãF [620 ¡ãC] minimum, shall be done after all machining and forming operations, including thread rolling and any type of cutting.

A335 P9 seamless pipe is a type of chrome molybdenum pipe listed in ASTM A335 (ASME S/A335, Chrome-Moly), which has become the standard in the power generation industry and petrochemical industry, not only because of its tensile strength, corrosion resistance resistance and high temperature strength, but also because of its cost-effectiveness. Chromium molybdenum tubes are popular in P grades P5, P9, P11, P22, P91 and P92. The P11, P22 and P91 grades are most commonly used in the powder industry and petrochemical plants, while the P5 and P9 grades are often used in oil refineries.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.66

F5 A182 Pipe Flanges tends to have a fairly high electrical conductivity amongst other wrought alloy steels in the same category. It has a comparatively high base cost and high embodied energy. ASTM A182 is the Standard Specification for Forged Stainless Steel Pipe Flanges and Stainless Steel Forged Fittings.

ASTM A335 P91 Alloy Steel Pipe and High Pressure Boiler Tube are the two variants available, the range depends on the size, which only depends on the application. Pipe lengths will be hydrostatically tested and non-destructively tested to specification.
volume_up
content_copy

share
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P125

ASTM A193 Grade B7 specification covers requirements for high tensile alloy steel bolting material for use in high temperature or high-pressure service and other special purpose applications.

ASTM A335 P11 seamless pipes are used in the production of transmission components in the automotive industry. Tubing is also used in the oil and gas industry because it is stronger, harder and has good properties at high temperatures.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P130

Since these are heavy duty tension nuts, they are used in high vibration and high stress applications such as aircraft engine parts and automotive engine parts. ASTM A194 Class 2h material consists of all classes of carbon, manganese, phosphorus, sulfur and silicon.

The Welding neck flanges are available across various materials. These materials will have to be as per the Standards set. The materials also should be as per the quality specified by the ASTM or ASME standards.

HASTELLOY C-276 alloy (UNS N10276) was the first wrought, nickel-chromiummolybdenum material to alleviate concerns over welding (by virtue of extremely low carbon
and silicon contents).

ASTM A335 Pipe (ASME S/A335, Chorme-Moly) is a seamless ferritic alloy steel pipe for high temperature service. Pipe ordered in accordance with this specification shall be suitable for bending, vanstoning and similar forming operations, and fusion welding. Sometimes referred to as “P grade”, lilac molybdenum tubing is popular in P grades P5, P9, P11, P22 and P91. The P11, P22 and P91 grades are most commonly used in the power industry and petrochemical plants, while the P5 and P9 grades are often used in oil refineries.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P98

ASTM A182 is the Standard Specification for Forged Stainless Steel Pipe Flanges and Stainless Steel Forged Fittings.

Forged Pipe Fittings (Socket Weld and Threaded) are made in
accordance to ASME B16.11, MSS-SP-79/ 83/ 95/ 97 and BS3799
standards, and are used to connect nominal bore schedule pipes
and pipelines.

While the term alloy steel could even apply to stainless steel grades, the ASTM specification or ANSI standard used to produce the Alloy Steel Flanges would give the buyer details regarding the chemistry details of these products.

AISI 4130 grade is a low alloy steel with elements such as chromium and molybdenum added as strengthening agents in its distribution. AISI 4130 pipe is more receptive to treatment by heat or mechanical means than conventional carbon steel.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.64

Alloy pipe is defined according to the material used in production (ie material), as the name suggests, it is made of alloy pipe; seamless pipe is defined according to the production process (seamless), which is different from seamless pipe is seamless pipe, Including straight seam welded pipe and spiral pipe.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.27

ASME SA 335 P91 alloy steel pipe also has some excellent properties such as strong construction, precise dimensions, corrosion resistance and more. Our line of ASTM A335 P91 Alloy Steel Pipe is perfectly engineered in tubular form and in a variety of sizes.

ASTM A193 Grade B8M Grade 1 Fasteners are similar to Grade B8 but are made of AISI 316 stainless steel instead of AISI 304 stainless steel. Type 316 stainless steel has better corrosion resistance than type 304 stainless steel due to the addition of molybdenum.

Alloy steel F12 square bars can withstand very high temperatures with minimal product aging even after thousands of operating hours,

Flanges that can withstand harsh environments are critical when transferring high temperature or corrosive media from one process to the next through chrome alloy tubing.

A335 P91 material, we use ASTM A335 Gr P91 Welded Pipe
Heat treatment method to standardize the strength of the material. 9% chromium and 1% molybdenum make the pipe strong and corrosion resistant. The material is resistant to wear and high temperature creep. ASTM A335 P91 pipe does not deteriorate, reduces thickness, and has higher creep strength. Pipeline applications are primarily used in power generation, petrochemical, heater and reheat liners, boilers, and petroleum services.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.58

ASTM A193 Grade B8 Grade 1 Bolts and Studs Made of AISI 304 Stainless Steel. Type 304 is the most commonly used stainless steel grade in the fastener industry.

ASTM A182 F9 flanges are more versatile. This flange is thinner in size, easy to install in tight working spaces, and more economical compared to various other flanges.

There are different types of fittings such as bends, tees, crosses, reducers, caps and the WPHY 52 Elbow.In sour service wells, when hydrogen sulphide gas reacts with water, the hydrogen molecule gets deposited either on the pipes or fittings.

ASTM A182 Alloy Steel F22 Fittings are available in a variety of shapes, sizes and dimensions according to the needs or requirements of the application or to customer supplied specifications.

The ASTM A333 standard covers seamless walled and welded carbon and alloy steel pipes for cryogenic use. ASTM A333 Alloy Pipe shall be manufactured in a seamless or welded process with no filler metal added during the welding operation.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.61

Alloy steel is steel that is alloyed with a variety of elements in total amounts between 1.0% and 50% by weight to improve its mechanical properties. Alloy steels are broken down into two groups: low alloy steels and high alloy steels. The difference between the two is disputed. Smith and Hashemi define the difference at 4.0%, while Degarmo, et al., define it at 8.0%.[1][2] Most commonly, the phrase “alloy steel” refers to low-alloy steels.