A182 Steel 2507 Hex Bolts Double End Duplex 32750 SAF 2507 F55 S32750 Stud Hex Bolt Nut Washer

A789 UNS S31803 and UNS S32205 are two grades of duplex stainless steel that are widely used in various industrial applications. These Duplex S31803 Seamless Pipes are known for their excellent corrosion resistance, high strength, and good weldability. A789 is a specification that covers seamless and welded tubes made from duplex stainless steel.

ASTM A240 Type 2205 Plate is a duplex stainless steel plate that is used extensively in various industries such as chemical processing, oil and gas exploration, and marine engineering. SA 240 GR 2205 Sheet is made from grade 2205 stainless steel, which is a combination of ferritic and austenitic steel.

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

ASTM A815 UNS S32205 Long Radius Elbow is used in turning pipe direction and is also resistant to chloride and sulfide environments. These ASME B16.9 Duplex Stainless Steel Seamless Fittings have a higher chromium content.

Due to the excellent physical and mechanical properties of Super Duplex, the quality of Super Duplex steel fasteners can meet the high demands of the gas, oil and marine industries.

ASTM A240 Type 2205 Duplex Sheet provides a maximum Brinell hardness value of approximately 290 in the annealed condition.

Alloy 2205 duplex stainless steel is an alloy developed from the initial Super Duplex Stainless Steel. It is supplied in the solution annealed condition.

Due to the alloy’s very high mechanical strength, dual-phase fastener manufacturers can reduce the weight of their designs by thinning the cross-section of the final product, proving a cost-saving alternative to other grades of stainless steel.

2507 has high resistance to stress corrosion cracking (especially chloride stress corrosion cracking), high energy absorption, high strength, and erosion. Essentially, and the Duplex alloys are a compromise.

Duplex stainless steels are considered resistant to stress corrosion cracking because they are not as resistant to this form of corrosion as ferritic stainless steels.

UNS S31803 Bolt is a threaded fastener with external threads. Generally, like screws, alloy S31803 bolts tend to use a variety of head designs.

Super Duplex 2507 cannot be strengthened by heat treating. Annealing is performed at 1920¡ãF – 2060¡ãF (1049¡ãC – 1127¡ãC), followed by rapid cooling.

Duplex 2205 stainless steel (both ferritic and austenitic) is used extensively in applications that require good corrosion resistance and strength. This grade offers higher resistance to corrosion

Super Duplex 2507 is used in environments containing high levels of chlorides or dissolved oxygen, such as seawater cooling, salt evaporation, and desalination, geothermal wells.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

The 2205 duplex stainless steel pipe also demonstrates good fatigue strength, as well as outstanding resistance to stress related corrosion cracking, crevice corrosion, pitting, erosion corrosion, and general corrosion in severe environments.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

The 21% chromium content is the key to extreme corrosion resistance and strength of the SA 182 f51 flanges. HT PIPE is a leading supplier and manufacturer of the flanges in various scales, shapes and types.

The A182 Gr. F51 / S31803 material is a typical duplex stainless steel, which contains approximately 50% ferrite and 50% austenite.

Duplex stainless steels have a microstructure which is 50% ferritic and 50% austenitic. This composition gives them a better strength than either ferritic or austenitic steels. Further details about this topic are given below (see ASTM A790 pipes).

S32760 also has high strength and extended service life. It is 10% lighter than grade 316 steel, ideal for sub-zero use, and more cost-effective than nickel alloys. Stainless steel grade F55 can be easily machined and welded.

Through additions of chromium, molybdenum and nitrogen localized corrosion such as pitting and crevice attack are improved. Alloy 2507 has excellent localized pitting resistance.

Super Duplex Steel Pipes and Tubes are available in various dimensions, shapes like square, rectangle, and so on and enormous sizes. We are offering the standard quality of products of our customers. Our Product is offering excellent corrosion resistance and remarkable dimensional accuracy.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

The mechanical strength, corrosion resistance and low temperature toughness of the ASTM A182 F53 Flanges is higher than that of ordinary duplex stainless steels.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Due to the material composition, the strength and the corrosion resistance, these flanges are used in a variety of applications.

The service temperature of 2205 duplex stainless steel should be limited to below 600¡ãF. Prolonged exposure to high temperatures can make 2205 stainless steel brittle.

 ANSI B16.5 Super Duplex Stainless Steel S32750 Orifice Flange provides excellent resistance to a wide range of corrosive environments, including seawater, acidic solutions, and chloride-containing environments. Super Duplex F53 WN Flange exhibits higher corrosion resistance than standard duplex stainless steels.

Duplex stainless steel UNS S31803 Nuts are available in two phase, 5% to 6% nickel alloy steel, ferritic, 3% molybdenum, austenitic 22% chromium.

A ferrous metal is one that contains iron. Therefore, stainless steels are ferrous metals as their main constituent is iron, even in the very highly alloyed grades, such as super duplex stainless steels, or super austenitic stainless steels.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

The formation of ASTM A479 duplex steel UNS S32205 tie rod consists of a pool of austenite surrounded by continuous ferrite phases. ASME SA 479 Duplex Steel UNS S31803 Tie Rods are hot worked in the temperature range of 1750¡ãF to 2100¡ãF. This is designed to reduce the depth used in fabrication, thereby reducing the weight of precise significance for items such as pressure vessels, structural functions, etc. As ASTM A479 dual phase steel for bridges, storage tanks, etc. UNS S32205 rebar has approximately twice the superior performance of SS 304 .

The ASTM A182 UNS S32750 Slip On Flanges are good to use with seamless pipes.