A420 WP L3 WP L6 elbow ASTM A420 WPL6 pipe fittings for use in low temperature service

Steel flanges provide an easy access for cleaning, inspection or modification. They usually come in round shapes but they can also come in square and rectangular forms. The flanges are joined to each other by bolting and joined to the piping system by welding or threading and are designed to the specific pressure ratings; 150lb, 300lb, 400lb, 600lb, 900lb, 1500lb and 2500lb.

A flange can be a plate for covering or closing the end of a pipe. This is called a blind flange. Thus, flanges are considered to be internal components which are used to support mechanical parts.

ASTM A350 LF3 Carbon Steel Round Bars are designed and developed to international quality standards. We have ready stock to ship to most parts of the country. These ASTM A350 LF3 carbon steel round bars are made of high grade corrosion resistant metal alloys. Carbon steel LF3 round bars have the best corrosion resistance to general corrosion. Carbon steel LF3 threaded rods have good ductility and optimum creep properties. Carbon steel LF3 polishing rods have the best corrosion resistance to oxidation corrosion.

Pipe fittings of ASTM A420 WPL6 are widely utilized in pressure piping and pressure vessel service at low-temperatures.ASTM A420 is the standard specification for pipe fittings of carbon steel and alloy steel used for low temperature services.

The LTCS A420 WPL6 Weld Fittings are greatly resistant against the sea water and marine environments with 1/8 inches to 48 inches nominal bore sizes.

Some of its applications are power generation, pulp and paper industry, power offshore oil drilling industry, specialty chemicals and pharmaceuticals. Other applications where it is found to be used are condensers, gas handling, chemical equipment, seawater equipment, pharmaceutical equipment and heat exchangers.

The carbon steel ASTM A234 WPB pipe fittings offer a wide of industrial application like chemical equipments, boiler and exchanger manufacturing, mining, refineries, utilities, oil refineries and many others.

Pressure-Temperature Rating of ASTM A350 Gr. LF3 flanges are identical to ASTM A105 flanges.

We are manufacturers, suppliers and exporters of Carbon Steel A105 / A105N Flanges, which, the American Society for testing materials, classifies as a standard that covers forged Carbon-Steel piping parts that also include carbon steel pipe flanges, which are serviceable in pressure systems at room temperatures as well as temperatures higher than it. We produce Carbon Steel A105 / A105N Blind Flanges which are successful in pressure bearing and sealing pipe ends in heavy pressure applications like hydraulic systems since they have a maximum bending stress at the centre.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Steel flanges provide an easy access for cleaning, inspection or modification. They usually come in round shapes but they can also come in square and rectangular forms. The flanges are joined to each other by bolting and joined to the piping system by welding or threading and are designed to the specific pressure ratings; 150lb, 300lb, 400lb, 600lb, 900lb, 1500lb and 2500lb.

A flange can be a plate for covering or closing the end of a pipe. This is called a blind flange. Thus, flanges are considered to be internal components which are used to support mechanical parts.

The a105 is a mild steel forgings similar to the 20 steel.

ASTM A105 flanges are forged carbon steel flanges for ambient- and higher-temperature service in pressure systems.

ASTM A234 covers wrought carbon steel and alloy steel fittings of seamless and welded construction covered by the latest revision of ASME B16.9, B16.11, MSS-SP-79, MSS-SP-83, MSS-SP-95, and MSS-SP-97.

ASTM A105 steel grade is a typical common material (mild carbon steel) for forged carbon steel flange, it used in a lot of places for ambient and higher-temperature service in pressure systems.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Although ASME SA 694 F60 flanges are used in a variety of applications, ASTM A694 F60 flanges are overwhelmingly used in high pressure piping systems for conveying oil, gas and petrochemical aggregates.

Forgings mainly include die forging, free forging and cutting forming processes to manufacture pipe fittings.

This material is durable, cost lower, and difficult to break. In case used in a stainless steel piping system it shall be adapted with a lap joint end ring.

A-694 grades, F42 to F70 (for high volume applications). Due to the superior strength of this material, you will find a high-volume material widely used in plumbing services. Alloy steel forgings have higher chromium and molybdenum content than standard carbon steel forgings and are designed for high temperature (over 1000*F), high pressure service. They also have higher corrosion resistance than standard carbon steel forgings due to their higher chromium content.

There are seamless and welded A234 WP9 pipe fittings,the seamless A234 WP9 pipe fittings are manufactured from seamless steel pipes A335 P9,welded A234 WP9 pipe fittings mean they are made from welded pipes or steel plates.Studying the market demands, we deliver quality products that are sustainable. Our products are 100% certified.

This specification covers standards for forged carbon steel piping components, that is, flanges, fittings, valves, and similar parts, for use in pressure systems at ambient and higher-temperature service conditions

ASTM A350 LF2 CS round bars are often forged and extruded, but are not easily welded due to their tendency to crack.

A350 LF3 material is often referred to as low temperature carbon steel fittings or flanges.

Our carbon steel GR.70 offers some great features, making it an ideal choice.

ASTM A105 pipe fittings is used for installing or repairing piping or tubing systems that convey liquid, gas, and occasionally solid materials. sa 105 fittings comes in a variety of sizes to fit the pipe they will connect. It is useful to combine, divert or reduce the flow of the water supply.

ASTM A234 WPB is a common grade for 90 degree long radius elbow, which is one of the highly demanded. They available in a large size and thickness range. They have a good performance and suffices most industrial pipeline needs.

This material should be arranged the charpy V impact test in temperature of -46¡æ, to make sure it can work in a lower temperature service, for example in cold weather, winter or deep-sea water offshore projects.

We offer wide range of A105 Carbon Steel Flange, Carbon A105 Blind Flanges, CS A105 Pipe Flanges, Carbon Steel A105 Threaded Bars, Carbon Steel A105 Threaded Flanges in India. These Carbon Steel A105 Weld Neck Flanges widely used in various application industries.

We also produce Carbon Steel ASTM A234 WPB Threaded elbows with all male connections, all female or a combination of each.

These A234 WP9 Alloy Steel Reducer are relevant to use in low-pressure product flow services, however, their working pressure can vary depending upon the pipe’s built.This is because of the decreased inclination to accelerate malicious inter-metallic stages in these Alloy Steel WP9 Stub End, subsequently, bearing it more noteworthy flexibility than different alloys amid and following different thermal cycling conditions.